Maxxima MWL-42 pravokutno radno svjetlo sa 16 LED dioda - uputstvo za upotrebu

1. Uvod

This manual provides instructions for the installation, operation, and maintenance of your Maxxima MWL-42 Rectangular 16 LED Work Light. Please read these instructions thoroughly before use to ensure proper function and safety.

The Maxxima MWL-42 is a rectangular 16 LED work light designed for various work and utility applications. It features a wide flood beam pattern, delivering 2100 lumens of bright illumination. The unit is constructed with a durable powder-coated aluminum housing, a shatter-proof polycarbonate lens, and includes a robust stainless steel mounting bracket and bolt. It supports dual auto-select 12/24VDC voltage for versatile compatibility.

2. Sigurnosne informacije

• električna sigurnost: Ensure the vehicle's power is disconnected before attempting any installation or wiring. Improper installation may result in electrical shock, short circuits, or damage to the product or vehicle's electrical system.
• Intenzitet svjetlosti: Do not stare directly into the light when it is operating. The high intensity of the LEDs may cause eye strain or temporary vision impairment.
• Sigurnost montaže: Securely mount the light to prevent detachment during vehicle operation, especially in rough terrain or high-vibration environments. Use appropriate hardware and ensure the mounting surface can adequately support the light's weight.
• Radna temperatura: The light's housing may become warm during extended operation. Avoid touching the housing directly after prolonged use.
• Zaštita životne sredine: This product is designed for outdoor use. However, avoid submerging the light in water.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• 1 x Maxxima MWL-42 Rectangular 16 LED Work Light
• 1 x nosač za montažu od nerđajućeg čelika
• Mounting Hardware (bolt, nuts, washers)

4. Značajke proizvoda

• Provides a wide flood beam pattern for work and utility applications.
• High brightness: 2100 Lumens of light output.
• Durable powder-coated aluminum housing.
• Shatter-proof Polycarbonate lens.
• Dual auto-select voltage: 12/24VDC compatibility.
• Nisko amperage draw: 2.4A at 12V, 1.2A at 24V.
• Equipped with 2 blunt cut 11-inch jacketed leads for wiring.
• Robust 5/16-inch Stainless Steel bolt and bracket for mounting.

5. Postavljanje i instalacija

Potreban alat:

• Wrench (for mounting hardware)
• Skidači žice
• Crimping Tool (if using crimp connectors)
• Bušilica (ako su potrebne nove rupe za montažu)
• Voltmeter (recommended for verifying power)

Lokacija montaže:

Select a stable and secure location on your vehicle or equipment that provides optimal illumination for your intended application. Ensure the mounting surface is strong enough to support the weight of the light and withstand operational vibrations.

Koraci montaže:

1. Attach the stainless steel mounting bracket to the light using the provided hardware. Ensure all bolts are snug but do not overtighten.
2. Position the light and bracket assembly on the desired mounting surface. Mark the locations for any necessary drilling.
3. Drill pilot holes if required, then securely fasten the light assembly to the mounting surface using the 5/16-inch stainless steel bolt and bracket.
4. Adjust the angle of the light for optimal beam direction. Tighten the bracket bolts to secure the chosen angle.

Image: Maxxima MWL-42 Work Light mounted at an angle, illustrating the stainless steel bracket and bolt for installation.

Upute za ožičenje:

1. Isključite napajanje: Ensure the vehicle's power is OFF and the battery is disconnected before performing any wiring to prevent electrical hazards.
2. Identifikujte žice: The light comes with 2 blunt cut 11-inch jacketed leads. Typically, the red wire is positive (+) and the black wire is negative (-).
3. Poveži pozitivno: Connect the positive wire from the light to a switched 12V or 24V DC power source (e.g., a relay, switch, or existing accessory circuit). Ensure the circuit is protected by an appropriately rated fuse.
4. Connect Negative/Ground: Connect the negative wire from the light to a suitable ground point on the vehicle chassis.
5. Sigurne veze: Verify all connections are secure, properly insulated with heat shrink tubing or electrical tape, and free from potential shorts.
6. Test: Reconnect the vehicle battery and test the light's functionality.

Slika: Stražnja strana view of the Maxxima MWL-42 Work Light, illustrating the power cable connection point at the back of the unit.

6. Operacija

Once properly installed and wired, the Maxxima MWL-42 work light operates by applying 12V or 24V DC power to its input leads. Activate the light using the switch or control mechanism connected to its power source.

The light provides a wide flood beam pattern, designed for illuminating large areas effectively for various work or utility tasks. Its 16 LEDs deliver 2100 lumens, offering significant brightness for demanding applications.

Slika: Front view of the Maxxima MWL-42 Rectangular 16 LED Work Light with the LEDs in an unlit state, showing the clear lens and individual LED elements.

Slika: Front view of the Maxxima MWL-42 Rectangular 16 LED Work Light with all 16 LEDs illuminated, demonstrating its bright output.

7. Održavanje

• čišćenje: Periodically clean the polycarbonate lens with a soft cloth and a mild soap solution. Rinse with clean water and dry thoroughly. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the lens or housing finish.
• inspekcija: Regularly inspect the mounting hardware for tightness. Vibrations from vehicle operation can loosen bolts over time. Check the wiring for any signs of wear, fraying, cuts, or corrosion. Replace any compromised components immediately to ensure safe and reliable operation.
• Stambena briga: The powder-coated aluminum housing is designed for durability. To maintain its appearance and protective properties, avoid exposing it to harsh chemicals or extreme physical impacts.

Slika: Bočni profesionalacfile of the Maxxima MWL-42 Work Light, highlighting the robust aluminum housing and heat dissipation fins.

8. Otkrivanje problema

Svjetlo se ne pali:

• Provjerite priključke za napajanje: Ensure that the positive (+) and negative (-) wires are correctly connected and secure at both the light and the power source.
• Provjerite izvor napajanja: Confirm that the connected power source (12V or 24V DC) is active and providing the correct voltage. Use a voltmeter to test.
• Provjerite osigurač: Check the fuse in the power circuit. If it is blown, replace it with a fuse of the correct amperage rating.
• Ispitajte ožičenje: Look for any cuts, pinches, or corrosion in the wiring that could interrupt the electrical flow.

Svjetlosni izlaz je slab ili treperi:

• Check Voltage: Ensure the correct and stable voltage (12V or 24V) is being supplied to the light. Voltage drops can cause dimming.
• Pregledajte veze: Loose or corroded electrical connections can lead to intermittent power and flickering. Clean and tighten all connections.
• Čista sočiva: A dirty or obstructed lens can significantly reduce light output. Clean the lens as described in the Maintenance section.

9. Specifikacije

10. Garancija i podrška

For warranty information, technical assistance, or customer support regarding your Maxxima MWL-42 Rectangular 16 LED Work Light, please contact Maxxima customer service directly. Refer to the official Maxxima website or your original purchase documentation for the most current contact details and warranty terms.