Gingko Cube LED Click Clock User Manual

1. Uvod

Hvala na kupoviniasing the Gingko Cube LED Click Clock. This innovative alarm clock combines elegant design with smart functionality, displaying time, date, and temperature. Its unique sound-activated display ensures a dark room at night, illuminating only when needed. Please read this manual carefully to ensure proper setup and operation of your device.

Figure 1: The Gingko Cube LED Click Clock displaying the time 15:19. The clock features a minimalist cube design with a white wood-grain finish and bright white LED digits.

2. Sigurnosne informacije

• Ne izlažite uređaj vodi ili prekomjernoj vlazi.
• Izbjegavajte ekstremne temperature, direktnu sunčevu svjetlost ili izvore toplote.
• Ne pokušavajte rastavljati ili modificirati uređaj. To će poništiti garanciju.
• Use only the provided USB adapter or compatible power sources.
• Čuvati van domašaja djece.
• Odgovorno odložite baterije u skladu s lokalnim propisima.

3. Sadržaj paketa

Molimo označite kućicu za sljedeće stavke:

• Gingko Cube LED Click Clock (Model GK08W13)
• USB adapter za napajanje
• USB kabel
• Uputstvo za upotrebu (ovaj dokument)

4. Proizvod je gotovview

The Gingko Cube LED Click Clock is designed for simplicity and functionality. Its main features include a hidden LED display that appears through the wood-grain finish, and control buttons located on the back panel.

Slika 2: Pozadi view of the Gingko Cube LED Click Clock. This image shows the battery compartment cover removed, revealing slots for three AAA batteries. Above the battery compartment, five small control buttons are visible: SET, UP, DOWN, V/S, and RESET.

4.1 kontrolna dugmeta

• SET: Enters setting mode for time, date, and alarms. Confirms selections.
• GORE: Povećava vrijednosti tokom podešavanja.
• DOLJE: Smanjuje vrijednosti tokom podešavanja.
• V/S (Voice/Sound): Toggles between sound-activated display mode and permanent display mode.
• RESETOVATI: Vraća sat na fabričke postavke.

4.2 Ulazna snaga

The clock can be powered via the included USB cable and adapter, or by 3 x AAA batteries (not included). An internal battery is included to retain settings during power outages.

5. Podešavanje

5.1 Uključivanje

1. Korištenje USB napajanja: Connect the small end of the USB cable to the DC5V port on the back of the clock. Plug the larger end into the USB power adapter, then plug the adapter into a wall outlet.
2. Korištenje baterija: Open the battery compartment cover on the back of the clock. Insert 3 x AAA batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.

Displej će se upaliti, što označava da je sat uključen.

5.2 Initial Settings (Time, Date, Temperature Format)

Pritisnite i držite SET button for 3 seconds to enter setting mode. The display will flash, indicating the current setting is ready for adjustment. Use the UP i DOLJE buttons to change values. Press SET za potvrdu i prelazak na sljedeću postavku.

1. Postavka godine: Adjust the year (e.g., 2024). Press SET.
2. Postavka mjeseca: Adjust the month. Press SET.
3. Postavljanje datuma: Adjust the day. Press SET.
4. Format 12/24 sata: Select "12H" or "24H". Press SET.
5. Postavka sata: Adjust the hour. Press SET.
6. Postavka minuta: Adjust the minute. Press SET.
7. Jedinica temperature: Select "°C" (Celsius) or "°F" (Fahrenheit). Press SET.

The clock will exit setting mode automatically after a few seconds of inactivity or after the last setting is confirmed.

6. Uputstvo za upotrebu

6.1 Display Modes (Time, Date, Temperature)

The clock can cycle through displaying time, date, and temperature. By default, it will alternate between these displays.

Figure 3: The clock displaying the time 11:43, positioned on a dark desk next to a laptop. This illustrates the clock's compact size and clear LED display in a typical environment.

Figure 4: The clock displaying the temperature 19°C, also on a dark desk next to a laptop. This shows the clock's ability to display environmental temperature in addition to time and date.

6.2 Sound Activation (V/S Mode)

The clock features a sound-activated display mode, which conserves power and keeps your room dark. In this mode, the display turns off when the room is quiet and illuminates when a sound (like a clap or tap) is detected.

• Pritisnite V/S button to toggle between sound-activated display (display turns off after a few seconds of silence) and permanent display (display remains on).
• When in sound-activated mode, a sound above 60dB (e.g., a clap, finger snap, or gentle tap on the clock/surface) will activate the display for approximately 10 seconds.

6.3 Postavke alarma

The clock supports up to three different alarm settings (AL1, AL2, AL3).

1. From the normal display mode, short press the SET button repeatedly until "AL1", "AL2", or "AL3" appears.
2. Da biste podesili alarm, pritisnite i držite SET button for 3 seconds when the desired alarm (e.g., "AL1") is displayed. The hour digits will flash.
3. Koristi UP i DOLJE to set the alarm hour. Press SET.
4. Koristi UP i DOLJE to set the alarm minute. Press SET.
5. The display will show "ON:AL" or "OFF:AL". Use UP or DOLJE to toggle the alarm ON or OFF. Press SET za potvrdu.
6. Repeat for AL2 and AL3 if desired.

When an alarm sounds, it will last for 1 minute. To stop the alarm, press any button. The alarm will automatically turn off after 1 minute if no button is pressed.

6.4 Funkcija zatamnjivanja

The clock features an automatic dimmer function. The display brightness will automatically adjust between brighter (7:00 AM - 6:59 PM) and dimmer (7:00 PM - 6:59 AM) modes to suit ambient light conditions.

7. Održavanje

• Clean the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• If using batteries, replace them when the display becomes dim or erratic. Remove batteries if the clock will not be used for an extended period.

8. Otkrivanje problema

9. Specifikacije

10. Garancija i podrška

Gingko products are designed and manufactured to the highest standards. For warranty information or technical support, please refer to the official Gingko website or contact your retailer. Please have your model number (GK08W13) and purchase details ready when seeking support.

Za više informacija posjetite: www.gingkodesign.com