Intelbras IWR 3000N Wireless-N 300 Mbps Router User Manual

1. Uvod

This manual provides detailed instructions for the installation, configuration, and operation of your Intelbras IWR 3000N Wireless-N 300 Mbps Router. Please read this manual carefully before using the device to ensure proper functionality and safety. The IWR 3000N router is designed to provide reliable Wi-Fi connectivity for your home or small office network, offering speeds up to 300 Mbps and various features to manage your internet access.

2. Sigurnosne informacije

• Osigurajte da je ruter postavljen u dobro prozračenom prostoru kako biste spriječili pregrijavanje.
• Ne izlažite uređaj vodi, vlazi ili ekstremnim temperaturama.
• Use only the power adapter supplied with the router. Using an incorrect adapter may damage the device and void the warranty.
• Držite uređaj dalje od jakih elektromagnetnih polja.
• Do not attempt to open or repair the router yourself. Contact qualified personnel for service.
• Čuvati van domašaja djece.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• Intelbras IWR 3000N Wireless-N 300 Mbps Router
• Adapter za napajanje
• Ethernet kabl
• Vodič za brzu instalaciju

4. Proizvod je gotovview

4.1 Prednja ploča

The front panel of the router features LED indicators that provide information about the device's status.

Slika 1: Prednja strana view of the Intelbras IWR 3000N router, showing the Intelbras logo and status LEDs for power, WAN, LAN, and Wi-Fi activity.

• LED za napajanje: Indicates if the router is powered on.
• WAN LED: Indicates connection status to the internet (Wide Area Network).
• LAN LED diode (1-4): Označava aktivnost na žičanim LAN portovima.
• WLAN LED: Označava aktivnost bežične mreže.

4.2 Zadnja ploča

The rear panel contains all the physical connection ports and buttons.

Slika 2: Pozadi view of the Intelbras IWR 3000N router, displaying the power input, WPS/Reset button, WAN port (blue), and four LAN ports (yellow).

• Ulazna snaga: Ovdje povežite isporučeni adapter za napajanje.
• Dugme WPS/Reset: Press briefly for WPS function. Press and hold for 5-10 seconds to factory reset the router.
• WAN port (plavi): Connect your modem or internet service provider's cable here.
• LAN portovi (žuti, 1-4): Connect wired devices such as computers, gaming consoles, or smart TVs.
• Antene: Two external 5 dBi antennas for wireless signal transmission and reception.

5. Podešavanje

5.1 Fizička veza

1. Pozicioniranje rutera: Place the router in a central location in your home or office, away from obstructions and sources of interference (e.g., microwaves, cordless phones).
2. Povežite modem: Connect one end of an Ethernet cable to the WAN port (blue) on the router and the other end to the LAN port on your modem.
3. Priključite napajanje: Connect the power adapter to the router's power input and then plug it into an electrical outlet. The Power LED should illuminate.
4. Povežite žične uređaje (opciono): If you have wired devices, connect them to the yellow LAN ports (1-4) on the router using Ethernet cables.
5. Sačekajte inicijalizaciju: Allow a few minutes for the router to power on and initialize. The WAN LED should eventually turn solid, indicating an internet connection.

5.2 Initial Configuration (Router Mode)

To configure the router, you can use a computer connected via Wi-Fi or Ethernet.

1. Povežite se s ruterom:
   • Ožičeno: Connect your computer to one of the yellow LAN ports (1-4) on the router using an Ethernet cable.
   • bežični: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named "Intelbras_IWR3000N" (or similar, check the label on the bottom of the router). The default password is also on the label.
2. Pristupite Web Interfejs: Otvori a web browser (e.g., Chrome, Firefox, Edge) and type the default IP address 10.0.0.1 or 192.168.1.1 (check the router label for the exact address) into the address bar, then press Enter.
3. Prijava: Enter the default username and password. Typically, both are admin. Refer to the router's label if these credentials do not work.
4. Run Quick Setup Wizard: Upon successful login, the router's quick setup wizard should appear. Follow the on-screen instructions to configure your internet connection (e.g., PPPoE, Dynamic IP, Static IP) and set up your Wi-Fi network name (SSID) and password.
5. Sačuvaj postavke: Nakon završetka čarobnjaka, sačuvajte postavke. Ruter se može ponovo pokrenuti.
6. Ponovo poveži: If you changed the Wi-Fi network name or password, reconnect your wireless devices to the new network.

6. Načini rada

The Intelbras IWR 3000N supports multiple operating modes to suit different network requirements.

6.1 Režim rutera

This is the default mode, where the device acts as the primary gateway for your network, connecting to the internet via the WAN port and distributing internet access to wired and wireless devices.

6.2 Režim bežičnog repetitora

In repeater mode, the IWR 3000N extends the coverage of an existing Wi-Fi network. It connects wirelessly to another router's Wi-Fi signal and re-broadcasts it, effectively expanding the wireless range.

1. Pristup Web Interfejs: Prijavite se na ruter web interfejs kao što je opisano u Odjeljku 5.2.
2. Navigate to Operating Mode: Find the "Operating Mode" or "Wireless Mode" section in the settings.
3. Odaberite način rada repetitora: Choose "Wireless Repeater" or "WISP" mode.
4. Skeniranje mreža: The router will scan for available Wi-Fi networks. Select the network you wish to extend.
5. Unesite lozinku: Provide the Wi-Fi password for the selected network.
6. Sačuvaj i ponovo pokreni: Save the settings. The router will restart and operate as a repeater.

7. Napredne funkcije

7.1 Podrška za IPv6

The IWR 3000N is compatible with IPv6, the latest version of the Internet Protocol. This ensures future-proof connectivity and compatibility with modern internet services. Configuration options for IPv6 can typically be found under the "Network" or "WAN" settings in the web interfejs.

7.2 Site Blocking

This feature allows you to restrict access to specific websites or types of content. It is useful for parental control or managing network usage in a small office.

1. Pristup Web Interfejs: Prijavite se na ruter web interfejs.
2. Navigate to Security/Parental Control: Look for sections like "Security," "Parental Control," or "Access Control."
3. Configure Site Blocking: Dodajte URLs or keywords of the websites you wish to block. You may also be able to set schedules for when these blocks are active.
4. Sačuvaj postavke: Primijenite promjene.

7.3 Bandwidth Control (QoS)

Bandwidth Control (Quality of Service - QoS) allows you to prioritize internet traffic for certain applications or devices, ensuring smoother performance for critical tasks like online gaming or video conferencing.

1. Pristup Web Interfejs: Prijavite se na ruter web interfejs.
2. Navigate to QoS/Bandwidth Control: Find the "QoS" or "Bandwidth Control" section.
3. Configure Rules: Set rules based on IP address, MAC address, or application type to allocate bandwidth or prioritize traffic.
4. Sačuvaj postavke: Primijenite promjene.

8. Održavanje

8.1 Ažuriranje firmvera

Regularly updating the router's firmware ensures optimal performance, security, and access to new features. Visit the official Intelbras website for the latest firmware for your IWR 3000N model.

1. Preuzmite firmver: Preuzmite odgovarajući firmver file from the Intelbras support webweb lokaciju na vaš računar.
2. Pristup Web Interfejs: Prijavite se na ruter web interfejs.
3. Navigate to Firmware Upgrade: Find the "System Tools," "Firmware Upgrade," or "Maintenance" section.
4. Otpremi firmver: Potražite preuzeti firmver file and initiate the upgrade process. Do not power off the router during the update.
5. Ponovno pokretanje: The router will restart automatically after the update is complete.

8.2 Vraćanje na tvorničke postavke

A factory reset restores the router to its original default settings. This can be useful for troubleshooting persistent issues or when reconfiguring the device from scratch.

• Metod 1 (Hardverski gumb): With the router powered on, press and hold the WPS/Reset button on the rear panel for approximately 5-10 seconds until the LEDs flash. Release the button, and the router will restart with factory defaults.
• Metoda 2 (Web Interfejs): Prijavite se na ruter web interface. Navigate to "System Tools" or "Maintenance" and find the "Factory Defaults" or "Restore" option. Confirm the action.

9. Otkrivanje problema

10. Specifikacije

11. Garancija i podrška

For warranty information, technical support, or further assistance, please refer to the warranty card included with your product or visit the official Intelbras website. You can also contact Intelbras customer service directly for specific inquiries related to your IWR 3000N router.

Intelbras Official Webstranica: www.intelbras.com.br