1. Uvod
The SWITCHEX Dimmer + Driver is an innovative solution that combines an LED dimmer switch and an LED power supply into a single, integrated unit. Designed for convenience and efficiency, this device accepts standard 120 VAC input and converts it to low voltage DC, all while fitting within a standard electrical box. It supports power options up to 100W, representing a significant advancement in the power and control of LED lighting applications. This integrated unit simplifies installations by providing both dimming control and power conversion in one compact device, eliminating common compatibility issues between separate drivers and switches. Each SWITCHEX unit includes three interchangeable face plate colors: glossy white, glossy light almond, and glossy brown, allowing for seamless integration with various interior decors.
2. Značajke proizvoda
- 100W Load Capacity: Supports up to 100W for 24V LED products, with a 120V input.
- Interchangeable Finishes: Comes with glossy white, glossy dark brown, and glossy light almond finishes to match various decors.
- Superior LED Dimming: Provides smooth dimming performance from 100% down to 5%.
- Preset Dimmer with On/Off Switch: Features a convenient preset dimmer function combined with an on/off switch for easy operation.
- Eliminates Compatibility Issues: Integrates the driver and switch into one unit, resolving common compatibility problems between separate components.
3. Sadržaj paketa
Molimo Vas da provjerite da li su sve komponente prisutne prije početka instalacije:
- SWITCHEX Dimmer + Driver Unit (DI-24V-SE-100W)
- Glossy White Face Plate
- Glossy Light Almond Face Plate
- Glossy Brown Face Plate
- Instalacioni zavrtnji
Image: The three included interchangeable face plates (white, light almond, and brown) for the SWITCHEX unit, allowing customization to match your decor.
4. Sigurnosne informacije
UPOZORENJE: To avoid fire, shock, or death; turn off power at circuit breaker or fuse and test that power is off before wiring! This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician perform the installation.
- Do not use with non-dimmable LED fixtures or incandescent/fluorescent lights.
- Osigurajte ukupan vattage of connected LED fixtures does not exceed 100W.
- Radite samo unutar navedene zapreminetage range (120 VAC input).
- Ne pokušavajte popravljati ili modificirati uređaj. Za sve servisne radove obratite se kvalificiranom osoblju.
- Čuvati dalje od vode i vlage.
5. Postavljanje i instalacija
The SWITCHEX unit is designed to fit into a standard single-gang electrical box. Follow these steps for proper installation:
- Isključite napajanje: Locate the circuit breaker controlling the light fixture or outlet where you intend to install the SWITCHEX. Turn off the power completely at the main electrical panel. Verify power is off using a voltage tester.
- Pripremite ožičenje: Remove the existing switch or cover plate from the electrical box. Carefully pull out the existing wiring.
- Žične veze:
- Povežite black (line) wire from the electrical box to the crna žica on the SWITCHEX unit.
- Povežite bijela (neutralna) žica from the electrical box to the bijela žica on the SWITCHEX unit.
- Povežite zelena (uzemljena) žica from the electrical box to the zelena žica on the SWITCHEX unit.
- Povežite low voltage output wires (typically red/black or positive/negative) from the SWITCHEX unit to your 24V LED lighting fixture. Ensure correct polarity.
- Montirajte jedinicu: Carefully fold the wires and push the SWITCHEX unit into the electrical box. Secure it using the provided mounting screws.
- Attach Face Plate: Choose your desired face plate (white, light almond, or brown) and snap it onto the SWITCHEX unit. Secure it with the small screws if applicable (trim plate not included).
- Vrati snagu: Ponovo uključite struju na prekidaču.
Image: The SWITCHEX unit, demonstrating its compact design for in-wall installation, integrating both the LED driver and dimmer switch.
6. Uputstvo za upotrebu
The SWITCHEX unit provides intuitive control over your LED lighting:
- Kontrola za uključivanje/isključivanje: Press the bottom portion of the rocker switch to turn the lights ON or OFF.
- Kontrola zatamnjivanja: Use the vertical slider on the right side of the switch to adjust the brightness level. Slide up to increase brightness and slide down to decrease brightness.
- Preset Dimming: The dimmer will return to the last set brightness level when turned back on, if not fully off.
7. Održavanje
The SWITCHEX Dimmer + Driver is designed for long-term, maintenance-free operation. Follow these simple guidelines:
- čišćenje: To clean the surface of the switch, gently wipe with a soft, damp krpom. Ne koristite abrazivna sredstva za čišćenje, rastvarače ili jake hemikalije, jer mogu oštetiti završnu obradu.
- Nema dijelova koje može servisirati korisnik: There are no user-serviceable parts inside the unit. Do not attempt to open or repair the device.
- Uslovi okoline: Osigurajte da radno okruženje ostane unutar specificiranih raspona temperature i vlažnosti kako biste spriječili oštećenja.
8. Otkrivanje problema
If you experience issues with your SWITCHEX unit, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetla se ne pale. | No power to the unit; incorrect wiring; faulty LED fixture. | Check circuit breaker. Verify wiring connections are secure and correct. Test LED fixture with a known working power source. |
| Svjetla trepere ili zuje. | Incompatible LED fixture; overloaded circuit; loose connection. | Ensure LED fixtures are dimmable. Verify total wattage does not exceed 100W. Check all wiring connections for tightness. |
| Dimming range is limited or inconsistent. | Incompatible LED fixture; minimum load not met. | Confirm LED fixtures are designed for dimming. Some LED fixtures may have a minimum load requirement for optimal dimming. |
| Switch feels warm. | Normal operation; overloaded circuit. | A slight warmth during operation is normal. If it feels excessively hot, immediately turn off power and check for overloaded circuit or short circuit. |
If the problem persists after attempting these solutions, please contact Diode LED customer support for further assistance.
9. Specifikacije
| Specifikacija | Vrijednost |
|---|---|
| Broj modela | DI-24V-SE-100W |
| Način rada | UKLJUČENO ISKLJUČENO |
| Operating Voltage (ulaz) | 120 V AC |
| Output Voltage | 24 volti DC |
| Wattage (Max Load) | 100 Watts |
| Dimming Range | 100% - 5% |
| Vrsta kontakta | Normalno otvoren |
| Tip konektora | Ožičen |
| Terminal Type | Screw |
| Dimenzije artikla (D x Š x V) | 1 x 1 x 1 inča |
| Tip kruga | Dimmer |
| Tip aktuatora | Pritisnite dugme |
| Kontakt materijal | Bakar |
| Međunarodna ocjena zaštite | IP54 |
| Broj pozicija | 2 |
| Specifikacija Met | UL |
| Kontrolni metod | Dodirnite |
| Opcije boja | White, Light Almond, Dark Brown |
| Težina artikla | 10 unce |
| Proizvođač | DIODE LED |
| UPC | 848333004964 |
10. Garancija i podrška
For information regarding the product warranty, please refer to the official Diode LED website or contact their customer support directly. Diode LED is committed to providing high-quality products and excellent customer service.
Diode LED Customer Support:
- For technical assistance, troubleshooting, or warranty claims, please visit the Diode LED official website ili kontaktirajte njihov tim za podršku putem kontakt informacija navedenih na njihovoj web stranici.
