ZKTeco WL10 bežični sistem za evidenciju radnog vremena s otiskom prsta - uputstvo za upotrebu

1. Uvod

The ZKTeco WL10 is a wireless fingerprint time and attendance terminal designed for efficient employee management. It integrates a fingerprint sensor, a 2.8-inch TFT display, and Wi-Fi connectivity to provide a reliable solution for recording attendance data. This manual provides detailed instructions for the setup, operation, and maintenance of your WL10 device.

2. Sigurnosne informacije

• Osigurajte da je uređaj instaliran na suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Koristite samo strujni adapter koji ste dobili uz uređaj.
• Ne pokušavajte sami rastavljati ili popravljati uređaj. Obratite se kvalifikovanom servisnom osoblju.
• Keep the fingerprint sensor clean and free from dust or liquids.

3. Sadržaj paketa

Molimo Vas da provjerite paket za sljedeće stavke:

• ZKTeco WL10 Time Attendance Terminal
• Adapter za napajanje
• Pribor za montažu (vijci, tiple za zid)
• Vodič za brzi početak (ako je uključen)

4. Device Overview

Familiarize yourself with the components of the ZKTeco WL10 device.

Figure 4.1: ZKTeco WL10 Front View
This image displays the front of the ZKTeco WL10 device, featuring a 2.8-inch TFT display showing the date, time, and a "Check-in" prompt. Below the screen is a numeric keypad with function buttons (ESC, M/OK) and navigation arrows. To the right, a green-lit fingerprint sensor is visible, along with the ZKTeco logo at the bottom right.

4.1. Prednja ploča

• 2.8-inčni TFT ekran: Shows date, time, attendance status, menu options, and user information.
• Tastatura: Numeric keys (0-9) for ID input and menu navigation, along with function keys like ESC (Escape) and M/OK (Menu/OK).
• Senzor otiska prsta: Used for fingerprint registration and verification for time attendance.
• ZKTeco Logo: Identifikacija brenda.

4.2. Side/Rear Panel (General)

• Napajanje: Za povezivanje strujnog adaptera.
• USB host port: For data transfer to/from a USB flash drive.
• USB Client Port: Za povezivanje sa računarom.

5. Podešavanje

5.1. Montaža uređaja

1. Choose a suitable location for installation, ensuring it is easily accessible for users and away from direct sunlight or heat sources.
2. Use the provided mounting template (if available) to mark the drilling positions on the wall.
3. Izbušite rupe i umetnite zidne čepove.
4. Pričvrstite uređaj na zid pomoću priloženih vijaka.

5.2. Priključak za napajanje

Connect the supplied power adapter to the device's power port and then plug it into a power outlet. The device will power on automatically.

5.3. Initial Configuration and Wi-Fi Setup

1. Upon first power-on, the device may prompt for initial settings like date, time, and language. Follow the on-screen instructions.
2. Da konfigurišete Wi-Fi:
   • Pritisnite M/OK dugme za ulazak u glavni meni.
   • Navigirajte do Comm. or Mreža postavke.
   • Odaberite Wi-Fi i omogućite ga.
   • Scan for available networks and select your desired Wi-Fi network.
   • Enter the Wi-Fi password using the keypad and confirm.
   • Nakon povezivanja, ikona Wi-Fi mreže će se pojaviti na ekranu.

6. Uputstvo za upotrebu

6.1. Registracija korisnika

Before users can record attendance, they must be registered in the system.

1. Pritisnite M/OK za ulazak u glavni meni.
2. Navigirajte do User Manage > Novi korisnik.
3. Enter a unique User ID (e.g., 1 to 1000).
4. Odaberite Upišite Finger. Place the user's finger on the sensor three times, lifting it slightly between each placement. Ensure full contact.
5. Optionally, enroll a password or card (if supported).
6. Sačuvajte korisničke podatke.

6.2. Recording Attendance (Check-in/Check-out)

Sa glavnog ekrana:

• Postavite registrovani prst na senzor otiska prsta.
• The device will verify the fingerprint and display a success message, recording the attendance event (e.g., "Check-in Success").
• The device automatically determines "Check-in" or "Check-out" based on the last recorded event and configured time settings.

6.3. Upravljanje podacima

The WL10 supports various methods for data management.

6.3.1. Self-Service Recorder (SSR) Report

The SSR function allows users to download attendance reports directly to a USB flash drive without needing software.

1. Insert a formatted USB flash drive into the device's USB Host port.
2. Pritisnite M/OK za ulazak u glavni meni.
3. Navigirajte do Izvještaj or USB disk > Preuzmite izvještaj.
4. Select the desired report type (e.g., Attendance Log, User Info) and confirm.
5. The report will be saved to the USB drive in a readable format (e.g., Excel).

6.3.2. USB Host/Client Data Transfer

• USB domaćin: For direct data download/upload using a USB flash drive (as described for SSR).
• USB klijent: Connect the device to a computer using a USB cable. Use ZKTeco attendance management software (sold separately or available for download) to manage users, download logs, and configure advanced settings.

6.4. Sistemske postavke

Access the main menu (M/OK) to configure various system parameters:

• Datum i vrijeme: Set the correct date and time for accurate attendance records.
• Scheduled Bell: Configure specific times for the device to ring a bell (e.g., start/end of shifts).
• DST (Daylight Saving Time): Enable or disable DST as per local requirements.
• Access Control (if applicable): Configure basic access control features if the device is connected to a door lock.
• Informacije o sistemu: View device details, firmware version, etc.

7. Održavanje

• čišćenje: Use a soft, dry cloth to clean the device's exterior. For the fingerprint sensor, use a lint-free cloth. Do not use abrasive cleaners or solvents.
• Sigurnosna kopija podataka: Regularly back up attendance data to a USB flash drive or computer to prevent data loss.
• Ažuriranja firmvera: Check the ZKTeco official website for any available firmware updates. Follow the instructions provided with the update package carefully.

8. Otkrivanje problema

9. Specifikacije

10. Garancija i podrška

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ZKTeco webSačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.

Manufacturer: Vicom Security Pvt Ltd