Progress Lighting Zura Bath & Vanity Light Fixture P300062-015 Instruction Manual

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Progress Lighting Zura Bath & Vanity Light Fixture, model P300062-015. The Zura fixture features triangular, etched opal glass and a polished chrome finish, designed to complement modern bathroom aesthetics. Please read these instructions thoroughly before beginning installation to ensure safe and proper operation.

Sigurnosne informacije

UPOZORENJE: Opasnost od strujnog udara.

• Always disconnect power at the main circuit breaker before installation, servicing, or changing bulbs.
• Posavjetujte se s kvalificiranim električarem ako niste sigurni u proces instalacije.
• All wiring connections must be in accordance with local and national electrical codes.
• Nemojte prekoračiti maksimalnu snagutage specificirano za sijalice.
• Ovaj proizvod može sadržavati hemikalije za koje je država Kalifornija utvrdila da uzrokuju rak i urođene mane ili druge reproduktivne štete (upozorenje iz Prijedloga 65). Operite ruke nakon rukovanja.

Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne.

• Light Fixture Assembly (P300062-015)
• Etched Opal Glass Shades (2)
• Komplet hardvera za montažu
• Instalacijski list

Specifikacije

Postavljanje i instalacija

Follow these steps carefully to install your Zura Bath & Vanity Light Fixture. Professional installation is recommended if you are unfamiliar with electrical wiring.

1. Pripremite se za instalaciju

• Isključite napajanje: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage tester.
• Sadržaj raspakivanja: Pažljivo izvadite sve komponente iz ambalaže i provjerite da li imaju oštećenja.
• Skupite alate: You will typically need a screwdriver, wire strippers, electrical tape, and a voltage tester.

2. Montaža učvršćenja

The Zura fixture can be mounted either vertically or horizontally.

Image: The Zura fixture can be installed in either a vertical or horizontal orientation to suit your design preference.

• Pričvrstite montažnu ploču: Secure the fixture's mounting plate to the electrical junction box in the wall using the provided screws. Ensure it is firmly attached.
• Žične veze: Connect the fixture's wires to the corresponding house wires:
  • Black (Hot) to Black (Hot)
  • Bijela (neutralna) do bijele (neutralne)
  • Zeleni ili goli bakar (uzemljenje) do zelenog ili golog bakra (uzemljenje)
  Use wire nuts to secure connections and wrap with electrical tape for added safety.
• Sigurno učvršćenje: Carefully tuck the wires into the junction box and align the fixture base with the mounting plate. Secure the fixture to the mounting plate using the provided screws.

3. Installing Glass Shades and Bulbs

Slika: Detaljna views of the fixture's components, including the glass shades and polished chrome accents.

Image: Bulb and dimming information for the Zura fixture, indicating E26 medium base and A19 frosted bulbs are recommended, and the fixture is dimmable with compatible switches.

• Umetnite sijalice: Screw two E26 medium base bulbs into the sockets. The fixture is compatible with incandescent, CFL, or LED bulbs up to 100 watts each. Frosted A19 bulbs are recommended for optimal light diffusion.
• Pričvrstite staklene sjenila: Carefully slide each etched opal glass shade over the bulb and secure it according to the fixture's design (typically with a retaining ring or screws). Ensure they are snug but do not overtighten.

Nakon završetka instalacije, ponovo uključite napajanje na prekidaču.

Uputstvo za upotrebu

The Progress Lighting Zura Bath & Vanity Light Fixture is designed for simple operation.

• Uključivanje/isključivanje: Control the light fixture using a standard wall switch connected to the electrical circuit.
• Funkcija zatamnjivanja: This fixture is dimmable. If you wish to use the dimming feature, ensure you have installed dimmable bulbs and a compatible wall dimmer switch.

Održavanje

Čišćenje

• Raspored: To clean the polished chrome finish, wipe with a soft, damp cloth. Do not use abrasive cleaners or polishes, as they may damage the finish.
• Staklene sjenila: The etched opal glass shades can be cleaned with a mild glass cleaner and a soft cloth. Ensure the shades are cool before cleaning.
• Always ensure the power is off before cleaning any part of the fixture.

Zamjena žarulje

• Isključite napajanje: Before replacing bulbs, turn off the power at the circuit breaker.
• Ostavite da se ohladi: Allow old bulbs to cool completely before touching them.
• Remove Shades: Carefully remove the glass shades to access the bulbs.
• Zamijenite žarulje: Unscrew the old bulbs and screw in new E26 medium base bulbs, not exceeding 100 watts per bulb.
• Reattach Shades: Reinstall the glass shades securely.
• Vrati snagu: Ponovo uključite struju na prekidaču.

Rješavanje problema

Garancija i podrška

Your Progress Lighting Zura Bath & Vanity Light Fixture is covered by a Dvogodišnja ograničena garancija proizvođača. This warranty guarantees your satisfaction with your purchase and includes professional after-sales customer service support.

For warranty claims, technical assistance, or replacement parts, please contact Progress Lighting customer service. Refer to the contact information provided on the original packaging or visit the official Progress Lighting website.

Online resursi: Za dodatne informacije i podršku posjetite Progress Lighting Store na Amazonu.