Walrus Audio Iron Horse Lm308 Distortion V2 gitarska pedala za efekte - uputstvo za upotrebu

1. Uvod

The Walrus Audio Iron Horse Lm308 Distortion V2 is a high-gain guitar effects pedal designed to deliver a wide spectrum of distortion tones. From thick, warm overdrive to aggressive, saturated high-gain sounds, this pedal offers versatility for various musical styles. The V2 iteration includes updated controls for enhanced usability and tonal shaping.

2. Karakteristike

• Classic Distortion Tones: Delivers thick, punchy, and rowdy distortion.
• Updated Level Control: Facilitates easier dialing in of unity gain.
• Enhanced Tone Control: Allows for a broader range of treble adjustment.
• Smoother Distortion Control: Provides a more refined range for dialing in lower gain tones.
• Three Distortion Modes: A toggle switch offers three distinct clipping diode options for varied compression and tonal characteristics.
• Izdržljiva konstrukcija: Housed in a robust enclosure with a unique Galaxy Gold finish and custom artwork.

3. Kontrole i funkcije

The Iron Horse V2 features three primary control knobs and a three-way toggle switch to shape your sound.

Slika 1: Prednja strana view of the Walrus Audio Iron Horse V2 pedal, showing the Level, Tone, and Distortion knobs, along with the clipping toggle switch and footswitch.

• 3.1. Ručka za nivelaciju

  Controls the overall output volume of the pedal. Adjust this to achieve unity gain (output volume matches bypass volume) or to boost your signal.

• 3.2. Tone Knob

  Adjusts the treble content of the distorted signal. Turning it clockwise increases brightness, while turning it counter-clockwise reduces treble for a warmer sound.

• 3.3. Distortion Knob

  Determines the amount of gain and saturation applied to your signal. Rotate clockwise for more aggressive distortion and counter-clockwise for lighter overdrive or crunch tones.

• 3.4. Clipping Toggle Switch

  This three-position toggle switch selects between different clipping diode configurations, altering the pedal's compression and overall feel:

  • Lijeva pozicija: Provides a moderate amount of compression.
  • Srednja pozicija: Offers a wide-open, uncompressed signal, resulting in a more raw and dynamic distortion.
  • Desna pozicija: Delivers a higher amount of compression, leading to a more saturated and sustained tone.

• 3.5. Bypass Footswitch

  Engages or disengages the distortion effect. When engaged, the LED indicator will illuminate.

4. Podešavanje

1. Priključak za napajanje: Connect a standard 9V DC power supply (center-negative) to the power input jack on the pedal. The Iron Horse V2 requires a minimum of 10mA.
2. Ulazni priključak: Connect your guitar or other instrument to the INPUT jack on the right side of the pedal.
3. Izlazna veza: Povežite OUTPUT priključak na lijevoj strani pedale na vaš ampspašivač ili sljedeća pedala u vašem signalnom lancu.
4. Početne postavke: Start with all knobs at noon (12 o'clock) and the toggle switch in the middle position for a balanced starting point.

Slika 2: Pod uglom view of the Iron Horse V2, illustrating the input and output jack locations.

5. Uputstvo za upotrebu

Once the pedal is properly connected and powered, you can begin to explore its tonal capabilities:

• Uključivanje efekta: Press the footswitch to activate the distortion. The LED will light up. Press again to bypass the effect.
• Adjusting Distortion: Experiment with the Distortion knob to find your desired level of gain. Lower settings provide a gritty overdrive, while higher settings deliver full-on saturation.
• Shaping Tone: Use the Tone knob to brighten or darken your sound. This is crucial for matching the pedal to different guitars and amplifiers.
• Kontrola jačine zvuka: Adjust the Level knob to ensure your volume is consistent when the pedal is engaged and bypassed, or to provide a volume boost for solos.
• Istraživanje načina izrezivanja: The clipping toggle switch significantly alters the pedal's character.
  • For a more compressed, smoother distortion, try the U redu pozicija.
  • For a raw, dynamic, and less compressed sound, use the Srednji pozicija.
  • The lijevo position offers a balanced compression, suitable for many applications.

6. Održavanje

• čišćenje: Use a soft, dry cloth to clean the pedal's enclosure. Avoid abrasive cleaners or solvents.
• Napajanje: Always use a regulated 9V DC, center-negative power supply. Incorrect power can damage the unit and void the warranty.
• Skladištenje: Čuvajte pedalu na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura kada se ne koristi.
• Veze: Provjerite jesu li svi kablovi sigurno spojeni kako biste spriječili gubitak signala ili povremeni rad.

7. Otkrivanje problema

• Nema zvuka:
  • Check all cable connections (guitar to input, output to amp).
  • Verify the power supply is correctly connected and functioning.
  • Ensure the pedal is engaged (LED illuminated).
• Slab ili isprekidan signal:
  • Pregledajte kablove na oštećenja.
  • Potvrdite napajanje voltage and current are adequate (9V DC, at least 10mA).
  • Clean input/output jacks if corrosion is visible.
• Neželjena buka/zujanje:
  • Ensure you are using a high-quality, isolated power supply.
  • Provjerite ima li petlji uzemljenja u vašem signalnom lancu.
  • Move the pedal away from power transformers or other sources of electromagnetic interference.

8. Specifikacije

Slika 3: Pozadi view of the Iron Horse V2 pedal.

9. Garancija i podrška

Walrus Audio products are built with quality components and craftsmanship. For detailed information regarding warranty coverage, product registration, or technical support, please visit the official Walrus Audio webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte dokaz o kupovini za slučaj reklamacije.

For further assistance, please refer to the official Walrus Audio webstranica: www.walrusaudio.com