Parkside POF 1200 B2 Router Bit Set (6-piece) Instruction Manual

1. Uvod

This manual provides important instructions for the safe and proper use of your Parkside 6-piece router bit set. This set is designed for various woodworking applications and is compatible with the Parkside POF 1200 B2 router, as well as other routers accepting 8mm shank bits. Please read this manual thoroughly before using the router bits and retain it for future reference.

2. Opća sigurnosna uputstva

Always observe general safety precautions when working with power tools and accessories. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Zaštita očiju: Uvijek nosite odobrene zaštitne naočale ili zaštitne naočale kako biste se zaštitili od letećih krhotina.
• Zaštita sluha: Wear hearing protection during operation, as routers can produce high noise levels.
• Zaštita respiratornih organa: Wear a dust mask, especially when routing wood, to avoid inhaling wood dust.
• Radna oblast: Održavajte svoje radno mjesto čistim, dobro osvijetljenim i bez prepreka.
• Osigurajte radni komad: Uvijek clamp the workpiece firmly to prevent movement during routing.
• Pravilna ugradnja bita: Ensure the router bit is correctly and securely inserted into the router's collet. Refer to your router's manual for specific instructions.
• Pregledajte bitove: Prije svake upotrebe, provjerite glodalice da li imaju oštećenja, tuposti ili pukotina. Ne koristite oštećene glodalice.
• Router Speed: Match the router speed to the bit diameter and material. Larger bits and harder materials generally require lower speeds.
• Feed Direction: Always feed the router against the rotation of the bit to maintain control.
• Isključite ruter iz struje: Always unplug the router before changing bits, making adjustments, or performing maintenance.
• Držite ruke čiste: Držite ruke i prste dalje od rotirajućeg nastavka.

3. Proizvod je gotovview (Router Bit Set)

This set includes 6 different carbide-tipped router bits designed for various woodworking profiles and tasks. Each bit features an 8mm shank for compatibility with suitable routers.

Slika 1: Gotovoview of the Parkside 6-piece router bit set. This image displays the various profiles of the carbide-tipped bits included in the set, designed for different woodworking applications.

The set typically includes common profilekao što su:

• Straight Bit: For cutting dados, rabbets, and grooves.
• Uvala Bit: For creating decorative concave profiles.
• Chamfer Bit: For cutting angled edges.
• Round-Over Bit: For softening edges with a rounded profile.
• V-utor za svrdlo: For decorative V-shaped grooves and lettering.
• Bič za lastin rep: Za rezanje spojeva tipa lastin rep.

Note: The exact profiles may vary slightly. Refer to the packaging for specific bit types included in your set.

4. Podešavanje i instalacija bita

1. Ensure Router is Unplugged: Before installing or changing any router bit, always ensure the router is disconnected from the power supply.
2. Clean Collet and Bit Shank: Inspect the router's collet and the bit shank for any dust, debris, or resin buildup. Clean them thoroughly to ensure a secure grip.
3. Umetnuti bit: Insert the shank of the desired router bit into the collet. Do not bottom out the bit in the collet. Insert it at least three-quarters of the way into the collet, leaving a small gap at the bottom. This provides maximum gripping surface and reduces vibration.
4. Zategnite maticu stezne čahure: Use the appropriate wrenches (typically supplied with your router) to securely tighten the collet nut. Ensure it is tight enough to prevent the bit from slipping during operation, but do not overtighten.
5. Check for Runout: After tightening, manually rotate the bit to ensure it spins freely and without excessive wobble (runout).

5. Uputstvo za upotrebu

Always refer to your router's instruction manual for specific operating procedures. The following are general guidelines for using router bits:

• Izbor materijala: These bits are designed for woodworking. Avoid using them on metal, concrete, or other non-wood materials.
• Podešavanje dubine: Adjust the routing depth on your router according to your project requirements. For deeper cuts, make multiple shallow passes instead of one deep pass to reduce strain on the bit and router, and to achieve a cleaner finish.
• Router Speed: Set the router speed appropriate for the bit size and wood type. Harder woods and larger diameter bits generally require lower RPMs. Softer woods and smaller bits can handle higher RPMs. Consult your router's manual or bit manufacturer's recommendations.
• Brzina prijenosa: Maintain a consistent and moderate feed rate. Feeding too fast can lead to poor cut quality, bit burning, and excessive wear. Feeding too slow can also cause burning and dulling of the bit.
• Smjer rezanja: Always route against the rotation of the bit. This provides better control and prevents the router from "climbing" over the workpiece.
• Probni rezovi: Always perform test cuts on scrap material before routing your final workpiece to verify settings and achieve the desired profile.

6. Održavanje

Proper maintenance extends the life of your router bits and ensures consistent performance.

• čišćenje: After each use, clean the bits to remove wood resin and dust. Use a specialized bit cleaner or a mild solvent and a brush. Avoid using abrasive materials that can damage the carbide tips.
• inspekcija: Regularly inspect bits for signs of wear, dullness, chipping, or cracks on the carbide tips. Also check the shank for any bending or damage. Replace damaged or excessively dull bits immediately.
• Skladištenje: Store router bits in their original case or a dedicated bit storage tray to protect the carbide tips from damage and to prevent rust. Keep them in a dry environment.
• Oštrenje: Carbide-tipped bits can be professionally sharpened, but this should only be done by experienced professionals to maintain the correct cutting geometry.

7. Otkrivanje problema

8. Specifikacije

• Model proizvoda: 91104255275390
• Brand: Parkside
• Materijal: Carbide (Hard Metal)
• Prečnik drške: 8 mm (compatible with Parkside POF 1200 B2 and similar routers)
• Broj bitova: 6
• Number of Flutes (typical): 2
• Namjena: Obrada drveta

9. Garancija i podrška

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Parkside products typically come with a manufacturer's warranty against defects in materials and workmanship.

For technical support or inquiries regarding replacement parts, please contact Parkside customer service or visit the official Parkside webSačuvajte dokaz o kupovini za eventualne reklamacije.

Proizvođač: Parkside

Referenca proizvoda: 91104255275390