Lutron LECL-153PH-LA X-10 kompatibilni prekidač za prigušivanje svjetla Korisnički priručnik

Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch. This device is designed to control incandescent, halogen, and certain fluorescent lighting loads up to 600 watts at 120 Volts, utilizing X-10 powerline communication for dimming and switching functions. Please read all instructions thoroughly before proceeding with installation or use.

Važne informacije o sigurnosti

• UPOZORENJE: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring.
• Instalirajte u skladu sa svim nacionalnim i lokalnim električnim propisima.
• This dimmer is for use with permanently installed incandescent, halogen, or compatible fluorescent fixtures only. Do not use with low-voltage lighting with a magnetic transformer, motor-driven appliances, or non-dimmable fluorescent fixtures.
• Samo za unutrašnju upotrebu.
• Ako niste sigurni u bilo koji dio ovih uputa, obratite se kvalificiranom električaru.

Sadržaj paketa

• Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch (Light Almond)
• Mounting Screws (typically included)
• Wire Connectors (typically included)
• Uputstvo za upotrebu (ovaj dokument)

Slika: Front view of the Lutron LECL-153PH-LA X-10 Compatible Dimmer Switch in Light Almond color, showing the rocker switch and slide dimmer control.

Specifikacije

Instalacija (Podešavanje)

This dimmer is an X-10 compatible device. Proper installation requires understanding of both standard electrical wiring and X-10 addressing. If you are unfamiliar with X-10 systems, please consult an X-10 expert or a qualified electrician.

Potreban alat:

• Odvijači (Phillips i ravna glava)
• Skidači žice
• Električna traka
• Voltage tester

Upute za ožičenje:

1. Isključite napajanje: Locate the circuit breaker or fuse that controls the light switch you are replacing. Turn it OFF. Verify power is off at the switch box using a voltage tester.
2. Uklonite postojeći prekidač: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch.
3. Identifikujte žice:
   • Line/Hot Wire: Carries power from the circuit breaker.
   • Žica za opterećenje: Connects to the light fixture.
   • Neutralna žica: (If present, typically white) Not always required for dimmers, but check dimmer specifications.
   • Žica za uzemljenje: (Bare copper or green) Connects to the metal electrical box or ground wire bundle.
   • Traveler Wires: (For 3-way installations, typically red or black) Connects between two switches controlling the same light.
4. Connect the Dimmer:
   • Povežite žica za uzemljenje from the wall box to the green or bare copper wire on the dimmer.
   • Povežite Line/Hot wire to the designated Line terminal on the dimmer.
   • Povežite Optereti žicu to the designated Load terminal on the dimmer.
   • For 3-way installations, connect the traveler wires to the appropriate traveler terminals on both the dimmer and the companion switch. Refer to the specific wiring diagram provided with your dimmer for 3-way configurations.
   • Ensure all wire connections are secure using wire connectors.
5. Set X-10 Address: Before mounting, set the X-10 House Code and Unit Code on the dimmer. This is typically done via small rotary switches or dip switches on the dimmer module. Refer to the specific instructions on the dimmer itself or a separate X-10 setup guide for your system.
6. Montirajte dimer: Carefully fold the wires into the wall box and secure the dimmer to the box with the provided screws.
7. Instalirajte zidnu ploču: Pričvrstite zidnu ploču.
8. Vrati snagu: Ponovo uključite napajanje na prekidaču.

Operacija

The Lutron LECL-153PH-LA dimmer switch offers both manual control and X-10 powerline control.

ručna kontrola:

• On/Off: Press the bottom rocker switch to turn the lights ON or OFF.
• Dimming: Use the vertical slide control to adjust the light level. Slide up to brighten, slide down to dim.

X-10 Control:

Once the X-10 House Code and Unit Code are set, the dimmer will respond to X-10 commands sent over the powerline from an X-10 controller (e.g., a remote, wall-mounted keypad, or computer interface). Common X-10 commands include:

• "ON": Turns the light on to the last set dim level or full brightness.
• "OFF": Isključuje svjetlo.
• "BRIGHT": Gradually brightens the light.
• "DIM": Gradually dims the light.

Refer to your X-10 system's documentation for specific programming and command details.

Održavanje

• čišćenje: To clean the dimmer, wipe with a soft, damp cloth. Do not use chemical cleaners or abrasive materials.
• Nema dijelova koje može servisirati korisnik: There are no user-serviceable parts inside the dimmer. Do not attempt to open or repair the unit.

Rješavanje problema

Garancija i podrška

This Lutron product is covered by a warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lutron website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Lutron customer service directly.

Lutron Webstranica: www.lutron.com