1. Uvod
This manual provides essential information for the safe and efficient operation of your Intermec PC43T Thermal Transfer/Direct Thermal Desktop Printer. It covers setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the printer and retain it for future reference.
The Intermec PC43T is a versatile 4-inch desktop printer designed for various labeling applications, featuring both thermal transfer and direct thermal printing capabilities, a 203 DPI print resolution, an LCD display for easy navigation, and multiple USB connectivity options.
2. Sigurnosne informacije
Always observe the following safety precautions to prevent injury and damage to the printer:
- Izvor napajanja: Use only the power adapter supplied with the printer. Ensure the power outlet is properly grounded.
- ventilacija: Do not block ventilation openings. Ensure adequate airflow around the printer to prevent overheating.
- Okruženje: Operate the printer in a clean, dry environment, away from direct sunlight, excessive heat, or moisture.
- Rukovanje: Izbjegavajte ispuštanje ili izlaganje štampača jakim udarcima.
- Održavanje: Disconnect the power cord before performing any maintenance or cleaning. Do not attempt to service the printer yourself; refer to qualified service personnel.
3. Komponente štampača
Familiarize yourself with the main components of your Intermec PC43T printer:
This image displays the Intermec PC43T desktop label printer. The printer is dark gray with an integrated LCD display on top, showing menu options like 'Programs', 'Setup', 'Tools', and 'Wizards'. A label with a barcode and text 'EDI-DOC' is shown exiting the front of the printer. The printer features a blue button on the right side and several control buttons near the LCD screen.
- LCD ekran: Provides menu navigation and status information.
- Kontrolna dugmad: Used to navigate menus and confirm selections on the LCD display.
- Media Exit Slot: Where printed labels or receipts exit the printer.
- Media Cover Latch: (Blue button on the right side) Releases the top cover to access media and ribbon compartments.
- Napajanje: Connects the printer to the power adapter.
- USB portovi: Includes USB 2.0 and two USB Host ports for connectivity.
4. Početno podešavanje
4.1. Raspakivanje
- Pažljivo izvadite štampač i svu dodatnu opremu iz ambalaže.
- Provjerite da li su prisutne sve komponente navedene u otpremnici.
- Retain the packaging for future transportation or storage.
4.2. Povezivanje napajanja
- Povežite kabl za napajanje sa adapterom za napajanje.
- Plug the power adapter into the printer's power port.
- Uključite kabl za napajanje u uzemljenu električnu utičnicu.
4.3. Povezivanje USB-a
- Connect one end of the USB cable to the USB 2.0 port on the printer.
- Povežite drugi kraj USB kabla na slobodan USB port na računaru.
- The printer also features two USB Host ports for connecting peripherals.
4.4. Umetanje medija
The PC43T supports both thermal transfer (requires ribbon) and direct thermal (no ribbon) media. Refer to the specific media loading instructions provided with your media type.
- Press the blue media cover latch to open the printer's top cover.
- Place the roll of labels onto the media supply spindle, ensuring the labels feed correctly.
- Thread the media through the guides and under the print head.
- If using thermal transfer media, install the ribbon according to the instructions provided with the ribbon.
- Close the top cover until it latches securely.
5. Uputstvo za upotrebu
5.1. Uključivanje / isključivanje napajanja
- Za uključivanje: Press the power button located on the printer. The LCD display will illuminate.
- Za isključivanje: Press and hold the power button until the printer shuts down.
5.2. Korištenje LCD ekrana
The LCD display provides access to printer settings and status. Use the control buttons adjacent to the display to navigate:
- Strelice gore/dolje: Pomičite se kroz opcije menija.
- Dugme Enter: Odaberite opciju ili potvrdite postavku.
- Dugme za povratak: Povratak na prethodni meni.
Common menu options include:
- Programi: Access pre-loaded printing applications.
- Postavljanje: Configure printer settings such as media type, print darkness, and network settings.
- Alati: Perform calibration, test prints, or view printer information.
- Wizards: Guided setup processes for specific tasks.
5.3. Driver Installation and Printing
Before printing, install the appropriate printer drivers on your computer. Drivers are typically available from the Intermec support website. Once installed, you can print labels from compatible software applications.
- Provjerite da li je štampač uključen i povezan sa računarom.
- Otvorite softver ili aplikaciju za dizajn etiketa.
- Select the Intermec PC43T as your printer.
- Configure print settings (e.g., label size, orientation) as needed.
- Pokrenite zadatak štampanja.
6. Održavanje
Regular maintenance ensures optimal printer performance and extends its lifespan.
6.1. Čišćenje glave za štampanje
A dirty print head can cause poor print quality. Clean it regularly, especially after changing media or ribbon.
- Isključite štampač i iskopčajte kabl za napajanje.
- Otvorite poklopac medija.
- Gently wipe the print head surface with a lint-free cloth moistened with isopropyl alcohol.
- Ostavite glavu za štampanje da se potpuno osuši prije nego što zatvorite poklopac i ponovo uključite napajanje.
6.2. Replacing Supplies
Replace labels and thermal transfer ribbons as they run out. Always use Intermec-approved supplies for best results.
- Oznake: Follow the media loading instructions in Section 4.4.
- Ribbon (Thermal Transfer): Follow the specific instructions provided with your ribbon. Ensure the ribbon is correctly tensioned.
7. Otkrivanje problema
This section addresses common issues you might encounter with your PC43T printer.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema struje | Power cord disconnected; power outlet faulty. | Provjerite priključke za napajanje; pokušajte s drugom utičnicom. |
| Loš kvalitet štampe | Dirty print head; incorrect print darkness; media/ribbon mismatch. | Clean print head (Section 6.1); adjust print darkness via LCD menu; ensure correct media/ribbon type. |
| Etikete se ne uvlače ispravno | Media loaded incorrectly; media guides not adjusted. | Reload media (Section 4.4); adjust media guides to fit label width. |
| Računar ne prepoznaje štampač | USB cable disconnected; drivers not installed or corrupted. | Check USB connection; reinstall printer drivers. |
| LCD display shows error message | Specific printer error. | Refer to the printer's on-screen help or the Intermec support website for specific error codes. |
8. Specifikacije
Key technical specifications for the Intermec PC43T printer (Model: PC43TB00100201):
- Tehnologija štampe: Termalni transfer / Direktno termalno
- Rezolucija štampanja: 203 DPI
- Maksimalna veličina medija: 4 inča
- Prikaz: LCD ekran
- Povezivanje: USB 2.0, 2 USB Host Ports
- Posebne karakteristike: Tear-Off function, Real Time Clock
- Uključeno: Latin fonts, US power cord
- Težina artikla: Otprilike 1 funta
- Boja: Crna
9. Garancija i podrška
For warranty information, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) website. Technical support and additional resources, including updated drivers and firmware, can be found on the manufacturer's support portal.
If you require service or have questions not covered in this manual, please contact your authorized Intermec dealer or technical support.
