Fosmon 24-Hour Mechanical Dual Outlet Timer

Uvod

This manual provides instructions for the safe and efficient use of your Fosmon 24-Hour Mechanical Dual Outlet Timer, Model C-10681. This device is designed to automatically turn electrical appliances on and off at programmed times, offering convenience and potential energy savings. Please read these instructions thoroughly before operation and retain them for future reference.

Image: The Fosmon 24-Hour Mechanical Dual Outlet Timer, showing its compact design and rotating dial.

Sigurnosne informacije

Molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja:

• Samo za unutrašnju upotrebu. Ne izlagati vodi ili vlazi.
• Do not exceed electrical ratings: 125VAC, 15A, 1875W, 10A Tungsten, 3/4HP.
• Ensure the timer is securely plugged into a grounded 3-prong outlet.
• Isključite tajmer iz zidne utičnice prije čišćenja.
• Do not disassemble or attempt to repair the timer. Contact customer support for assistance.
• Čuvati van domašaja djece.

Slika: Stražnja strana view of the Fosmon timer showing the 3-prong plug and ETL certification label, indicating safety compliance.

Karakteristike proizvoda

• 24-satno programiranje: Set up to 24 ON/OFF cycles per day.
• 30-Minute Intervals: Program in increments as small as 30 minutes.
• Dual Outlets: Power two devices simultaneously.
• Prekidač za ručno prebacivanje: Temporarily bypass programmed settings.
• Grounded 3-Prong Design: Osigurava siguran rad.
• Široka kompatibilnost: Pogodno za lamps, fans, small appliances, reptile lights, grow lights, and holiday decorations.

Image: Close-up of the timer's dial, highlighting its fully programmable nature with 30-minute increments.

Slika: Sa strane view of the timer showing two grounded outlets, illustrating its dual outlet design.

Image: Diagram showing the timer connected to various appliances like a coffee maker, lamp, fan, and stereo, demonstrating universal compatibility.

Image: The timer shown with examples of CFL, Incandescent, and LED light bulbs, indicating broad compatibility with different lighting types.

Uputstva za postavljanje

Follow these steps to set up your Fosmon mechanical timer:

1. Prepare the Pins: The timer comes with all pins in the DOWN position. To begin programming, pull SVE the pins around the dial to the UP position. Each pin represents a 30-minute interval.
2. Postavite trenutno vrijeme: Rotate the entire dial clockwise until the arrow indicator on the timer points to the current time. The dial is marked with numbers 1-12 and includes sun/moon icons to distinguish AM/PM (white half for AM, black half for PM).
3. Program ON Times: Push the pins corresponding to the desired ON times DOLJE. Za nprample, if you want the device to turn on from 6:00 PM to 10:00 PM, push down the pins from the '6' mark in the black half to the '10' mark in the black half.
4. Program OFF Times: The pins that remain in the UP position represent the OFF times.
5. Povežite uređaj: Plug the appliance you wish to control into one or both of the timer's outlets.
6. Plug in Timer: Insert the timer into a standard 3-prong wall outlet.
7. Provjerite poziciju prekidača: Ensure the manual override switch (located on the top or side) is set to the TIMER position (usually indicated by a clock icon or "ON" for timer mode, not "ALWAYS ON").

The timer will now cycle through the programmed ON and OFF times daily.

Image: The Fosmon timer in a home setting, illustrating its use for lighting control and its dual outlet capability.

Uputstvo za upotrebu

Once programmed, the timer operates automatically.

• Automatski rad: The timer will activate and deactivate connected devices according to your set schedule. The dial will continuously rotate, indicating the current time.
• Ručno poništavanje: The timer features a manual override switch, typically located on the top or side.
  • To keep the connected device ON kontinuirano, slide the switch to the "ON" or "ALWAYS ON" position.
  • To keep the connected device OFF continuously, pomaknite prekidač u položaj "ISKLJUČENO".
  • To resume programmed operation, slide the switch back to the "TIMER" or clock icon position.

Image: A close-up of the timer, showing the manual override switch on the top edge.

Održavanje

The Fosmon mechanical timer requires minimal maintenance.

• čišćenje: Unplug the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Skladištenje: If storing the timer for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Rješavanje problema

Specifikacije

Garancija i podrška

Fosmon products are designed for reliability and performance. For warranty information or technical support, please contact Fosmon customer service.

You can typically find contact details on the official Fosmon website or through your purchase platform. Please have your model number (C-10681) and purchase date available when contacting support.