Intermec PC43TB01100201 Termo transfer/Direktni termalni desktop štampač Korisnički priručnik

1. Uvod

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Sigurnosne informacije

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Koristite samo kabl za napajanje koji dolazi s štampačem.
• Ne izlažite štampač vodi ili prekomjernoj vlazi.
• Osigurajte da je štampač postavljen na stabilnu, ravnu površinu.
• Izbjegavajte blokiranje ventilacijskih otvora.
• Disconnect power before cleaning or servicing the printer.
• Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• Intermec PC43TB01100201 Printer Unit
• US Power Cord
• Kratki vodič (nije uključen u ovaj priručnik)
• Software/Driver CD (may vary by package)

4. Podešavanje

4.1 Raspakivanje i postavljanje

1. Pažljivo izvadite štampač iz ambalaže.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Povezivanje napajanja

1. Connect the supplied US power cord to the printer's power input.
2. Uključite drugi kraj kabla za napajanje u uzemljenu električnu utičnicu.

4.3 Povezivanje sa računarom

The PC43TB01100201 printer supports USB and LAN connectivity.

• USB veza: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• LAN veza: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Otvorite poklopac štampača.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Zatvorite poklopac štampača.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje

• Za uključivanje: Pritisnite dugme za napajanje koje se nalazi na štampaču. LCD ekran će se upaliti.
• Za isključivanje: Pritisnite i držite dugme za napajanje dok se štampač ne isključi.

5.2 Korištenje LCD ekrana

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Štampanje

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Otvorite softver ili aplikaciju za dizajn etiketa.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Pokrenite zadatak štampanja.

The printer features a tear-off function for easy label separation after printing.

6. Održavanje

6.1 Čišćenje štampača

Redovno čišćenje pomaže u održavanju kvalitete ispisa i produžava vijek trajanja pisača.

• glava štampača: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Valjak s pločom: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• Eksterijer: Obrišite spoljašnjost mekom krpom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Otkrivanje problema

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Štampač ne reaguje:
  • Provjerite priključke za napajanje.
  • Verify USB or LAN cable connections.
  • Ponovo pokrenite štampač i računar.
  • Provjerite jesu li upravljački programi za štampač ispravno instalirani.
• Loš kvalitet štampe:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Etikete se ne uvlače ispravno:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Check for any obstructions in the media path.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Specifikacije

9. Garancija i podrška

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Proizvođač: Intermec
• Broj modela: PC43TB01100201
• For technical assistance, visit the official Intermec support webstranice ili kontaktirajte njihovu korisničku službu.