Rain Bird SST900IN

Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller User Manual

Model: SST900IN

1. Proizvod je gotovview

The Rain Bird SST900IN is a 9-zone indoor sprinkler/irrigation system timer/controller designed for residential use. It features intuitive zone-by-zone programming, allowing for customized watering schedules tailored to specific areas of your yard. This model replaces the SST900I and includes enhanced features for efficient water management.

Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller

Figure 1: Rain Bird SST900IN 9-Zone Indoor Sprinkler System Controller.

Uključene komponente:

2. Postavljanje i instalacija

The SST900IN controller is designed for indoor installation within a garage, home, or waterproof shed. Installation typically requires only a screwdriver.

Koraci instalacije:

  1. Snimi stare postavke: Before disconnecting an old timer, note down all existing settings including start times, run times, and watering days for each zone. This information will be used for programming the new SST900IN controller.
  2. Isključite napajanje: Unplug the power supply to the old timer.
  3. Žice za označavanje: Label each sprinkler wire with a small piece of tape corresponding to its zone number.
  4. Odspojite žice: Carefully disconnect all sprinkler wires from the old timer.
  5. Uklonite starije osobe: Remove the mounting screws and take the old timer off the wall.
  6. Montiraj novi tajmer: Hang the new SST900IN controller in its place and secure it using the provided mounting screws.
  7. Spojite žice: With the wire cover removed, connect each labeled sprinkler wire to the corresponding numbered zone terminal on the new controller. Connect the common wire to the common terminal.
  8. Priključite napajanje: Attach the power transformer to the controller and plug it into a nearby 120 VAC outlet.
Connecting wires to the Rain Bird SST900IN controller terminals

Figure 2: Wiring connections for the Rain Bird SST900IN controller.

Početni test:

To ensure the timer is connected properly, activate each zone using the 'Water All Zones Now' or 'Water 1 Zone Now' feature. Observe that each zone's sprinklers operate as expected.

Video 1: This official seller video demonstrates the installation and basic programming of the Rain Bird SST timers, including wiring and initial setup steps.

3. Uputstvo za upotrebu

The SST900IN controller allows for simple, zone-by-zone programming to customize your watering schedule.

Close-up of Rain Bird SST900IN display and control buttons

Slika 3: Krupni plan view of the SST900IN display and control panel.

Postavljanje trenutnog vremena i datuma:

  1. Okrenite točkić na POSTAVITE VRIJEME pozicija. Koristiti Tipke sa strelicama GORE/DOLJE to adjust the current time.
  2. Okrenite točkić na SET DATE pozicija. Koristiti LEFT UP/DOWN arrows to set the year, and the RIGHT UP/DOWN arrows to set the month and day.

Scheduling Watering:

Program each zone individually for precise control.

  1. Turn the dial to select the desired zone (e.g., Zone 1, Zone 2, etc.).
  2. Koristite LEFT UP/DOWN arrows to set the start time for watering.
  3. Koristite RIGHT UP/DOWN arrows to set the run time (watering duration) in minutes.
  4. Select watering days:
    • Pritisnite white RUN DAYS buttons (Sun, Mon, Tue, etc.) to select specific days of the week.
    • Alternativno, pritisnite EVEN/ODD DAYS button to water on even or odd-numbered days of the month.
    • For a cyclic watering schedule, press the CYCLIC WATERING button. Koristite LEFT UP/DOWN arrows to select the number of days between watering cycles, and the RIGHT UP/DOWN arrows to adjust the date when the first watering session will start.
  5. To enable multiple start times per day (up to four), press the 1st TIME, 2nd TIME, 3rd TIME, or 4th TIME buttons and set the start time and run time for each. The timer automatically orders times from early to later.
  6. Repeat these steps for all remaining zones.

Sezonsko podešavanje:

Adjust watering times for all zones simultaneously to account for seasonal weather variations (e.g., hotter/drier or cooler/rainier periods).

  1. Okrenite točkić na SEASONAL ADJUST.
  2. Koristite Tipke sa strelicama GORE/DOLJE to adjust the watering time percentage for all zones (from -90% to +100%).
  3. To return to normal watering times, change the percentagnazad na 0%.

Kašnjenje kiše:

Privremeno obustavite zalijevanje na određeni period.

  1. Okrenite točkić na RAIN DELAY.
  2. Koristite Tipke sa strelicama GORE/DOLJE to set the delay time for up to 72 hours. Watering will automatically resume once the delay ends.

Ručni rad:

Manually start watering for all zones or a single zone.

  1. Okrenite točkić na AUTO RUN.
  2. To water all zones: Press the green 'WATER ALL ZONES NOW' button. The display will show the current watering zone and remaining time.
  3. To water one zone: Turn the dial to select the desired zone. Press the green 'WATER 1 ZONE NOW' button. The display will show the current watering zone and remaining time. The default run time is 10 minutes, which can be adjusted using the Tipke sa strelicama GORE/DOLJE.
  4. Da biste zaustavili ručno zalijevanje, okrenite birač na OFF. Remember to return the dial to AUTO RUN to resume regular programmed watering.

4. Održavanje

The SST900IN controller is designed for durability and minimal maintenance.

5. Otkrivanje problema

The controller features automatic troubleshooting capabilities.

6. Specifikacije

Dimensions of the Rain Bird SST900IN controller

Figure 4: Approximate dimensions of the Rain Bird SST900IN controller.

7. Garancija i podrška

This product is covered by a manufacturer's warranty. For specific warranty details and claims, please refer to the warranty information provided with your purchase or contact Rain Bird customer support.

Rain Bird is committed to 'The Intelligent Use of Water™', providing high-quality irrigation products and support.

Povezani dokumenti - SST900IN

Preview Uputstvo za instalaciju i upotrebu Rain Bird tajmera za jednostavno podešavanje (SST)
Sveobuhvatan vodič za instalaciju, programiranje i korištenje Rain Bird Simple To Set (SST) tajmera za navodnjavanje. Uključuje upute za podešavanje, objašnjenja funkcija i savjete za rješavanje problema za model SST-600in.
Preview Često postavljana pitanja i vodič za jednostavno podešavanje tajmera (SST) kompanije Rain Bird
Sveobuhvatan vodič za Rain Bird Simple to Set Timer (SST) kontroler za navodnjavanje, koji obuhvata odabir proizvoda, instalaciju, programiranje, rješavanje problema i funkcije. Pronađite odgovore na uobičajena pitanja o postavljanju zona, rasporedima zalijevanja, senzorima za kišu i problemima s napajanjem.
Preview Uputstvo za upotrebu tajmera za prskalice Rain Bird ISM
Ovaj priručnik pruža upute za instaliranje, programiranje i rukovanje Rain Bird ISM tajmerom za prskalice. Obuhvata osnove tajmera, programiranje, podešavanje stanice i rješavanje problema.
Preview Uputstvo za upotrebu Rain Bird ESP-TM2 kontrolera: Instalacija, programiranje i rad
Sveobuhvatno korisničko uputstvo za Rain Bird ESP-TM2 kontroler za navodnjavanje. Pruža detaljne upute o instalaciji, ožičenju, osnovnom i naprednom programiranju, ručnom radu, rješavanju uobičajenih problema i sigurnosne informacije za efikasno zalijevanje travnjaka i vrta.
Preview Rain Bird ESP-9V tajmer za navodnjavanje na baterije
Rain Bird ESP-9V je izdržljiv i jednostavan za korištenje kontroler za navodnjavanje na baterije, dizajniran za pouzdano automatsko zalijevanje u zahtjevnim uvjetima. Odlikuje se dizajnom otpornim na vremenske uvjete, dugim vijekom trajanja baterije i intuitivnim programiranjem za efikasno upravljanje zonama. Saznajte više o njegovim karakteristikama, specifikacijama i opcijama modela.
Preview Rain Bird 1ZEHTMR digitalni tajmer za kraj crijeva: Vodič za instalaciju i programiranje
Sveobuhvatan vodič za digitalni tajmer Rain Bird 1ZEHTMR s detaljnim opisom instalacije, upravljanja baterijama, programiranja automatskih rasporeda zalijevanja, funkcija ručnog preklapanja i funkcija odlaganja kiše za optimalno navodnjavanje vrta.