1. Uvod
Thank you for choosing the Einhell TC-LD 25 Laser Distance Meter. This device is designed for quick and accurate measurement of distances up to 25 meters. Its compact design and user-friendly interface make it an ideal tool for various applications in construction, renovation, and DIY projects. Please read this manual carefully before using the device to ensure safe and optimal operation.
Figure 1: Einhell TC-LD 25 Laser Distance Meter
2. Sigurnosne informacije
This device uses a Class II laser. Observe the following safety precautions:
- Ne gledajte direktno u laserski snop.
- Nemojte usmjeravati lasersku zraku prema ljudima ili životinjama.
- Izbjegavajte direktno izlaganje očiju laserskom zraku.
- Ne rastavljajte niti modificirajte uređaj. Popravke treba obavljati samo ovlašteno osoblje.
- Držite uređaj van domašaja djece.
The laser diode operates at 635 nm.
3. Proizvod je gotovview
Familiarize yourself with the components of your Einhell TC-LD 25.
Slika 2: Prednja strana View (Display, Buttons)
Slika 3: Natrag View (Odjeljak za baterije)
Slika 4: Bočna strana View
Komponente:
- Laserska apertura: Emituje laserski snop za mjerenje.
- Zaslon: Shows measurement results, mode, and battery status.
- Measurement Button (ON/MEAS): Uključuje uređaj i pokreće mjerenja.
- Function/Unit Button (FUNC/UNIT): Cycles through measurement modes and changes units.
- Dugme za referentnu tačku: Switches between front and rear reference points.
- Clear/Off Button (C/OFF): Clears the last measurement or powers off the device.
- Pretinac za baterije: Located at the back for AAA batteries.
4. Podešavanje
4.1 Instalacija baterije
The Einhell TC-LD 25 requires two (2) AAA alkaline batteries (not included).
- Otvorite poklopac pretinca za baterije koji se nalazi na stražnjoj strani uređaja (pogledajte sliku 3).
- Umetnite dvije AAA baterije, pazeći na ispravan polaritet (+/-).
- Čvrsto zatvorite poklopac odeljka za baterije.
Slika 5: Odeljak za baterije
5. Uputstvo za upotrebu
5.1 Uključivanje/isključivanje
- Uključiti: Pritisnite ON/MEAS dugme. Laser će se aktivirati.
- Ugasiti: Pritisnite i držite C/OFF button for a few seconds. The device also features an automatic shutdown function after 3 minutes of inactivity to conserve battery life.
5.2 Osnovno mjerenje udaljenosti
- Uključite uređaj.
- Usmjerite laserski snop prema meti.
- Pritisnite ON/MEAS button once. The measured distance will be displayed on the screen.
5.3 Kontinuirano mjerenje (Min/Max)
This mode allows you to track the minimum and maximum distances as you move the device.
- Pritisnite FUNC/UNIT button until the continuous measurement icon (often a running person or min/max symbols) appears on the display.
- Move the device slowly towards or away from the target. The display will continuously update the current, minimum, and maximum distances.
- Pritisnite ON/MEAS to stop continuous measurement and view the final minimum and maximum values.
Slika 6: Kontinuirano mjerenje Example
5.4 Changing Reference Point
The device can measure from its front edge or its rear edge. The default is usually the rear edge.
- Pritisnite Referentna tačka button to toggle between front and rear measurement. An icon on the display will indicate the active reference point.
Figure 7: Measuring from Rear Edge
Figure 8: Measuring from Front Edge
5.5 Promjena jedinica
The device primarily uses metric units (meters).
- Pritisnite FUNC/UNIT button repeatedly to cycle through available units (e.g., m, ft, in).
6. Održavanje
- Očistite uređaj mekom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
- Regularly check the battery compartment for corrosion. Remove batteries if the device will not be used for an extended period.
- Store the device in its included pouch in a dry, dust-free environment.
Figure 9: Included Carrying Pouch
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uređaj se ne uključuje | Low or dead batteries; incorrect battery polarity | Zamijenite baterije; provjerite polaritet |
| Netačna mjerenja | Unstable surface; obstruction in laser path; extreme temperatures | Ensure stable measurement; clear path; operate within specified temperature range |
| Laser nije vidljiv | Bright ambient light; long distance measurement | Use in lower light conditions; use a target plate for long distances |
8. Specifikacije
| Feature | Specifikacija |
|---|---|
| Broj modela | TC-LD 25 (2270075) |
| Measuring Range | 0.05 m - 25 m |
| Preciznost mjerenja | +/- 3 mm / m |
| Laser Class | Klasa II |
| Laserska dioda | 635 nm |
| Automatska deaktivacija | 3 minuta |
| Baterije | 2 x AAA (alkalne) |
| Dimenzije (D x Š x V) | 11.2 x 2.5 x 4 cm |
| Težina | 70 g |
| Materijal | Akrilonitril butadien stiren |
| Međunarodna ocjena zaštite | IP54 (Vodootporan) |
9. Garancija i podrška
Einhell products are manufactured with high-quality materials and undergo strict quality control. For any warranty claims or technical support, please refer to your purchase documentation or contact Einhell customer service.
Spare parts availability in the EU is guaranteed for 1 year.
For further information, visit the official Einhell store: Einhell trgovina
