1. Uvod
The Lithonia Lighting BLT Series 2x4 Low Profile LED Troffer is designed to provide efficient and uniform illumination for various indoor commercial applications. This manual outlines the necessary steps for safe installation, proper operation, and routine maintenance of your LED troffer light. Please read all instructions carefully before proceeding with installation or use.
2. Sigurnosne informacije
UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje prije instalacije ili servisiranja.
- All wiring should be performed by a qualified electrician in accordance with national and local electrical codes.
- Osigurajte da je uređaj pravilno uzemljen kako biste izbjegli potencijalne električne opasnosti.
- Do not alter or modify the fixture. Any modifications may void the warranty and create safety risks.
- Handle the fixture with care to prevent damage to electrical components or the diffuser.
- This fixture is intended for indoor use in damp-location rated and IC rated environments.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- 1 x Lithonia Lighting BLT Series 2x4 LED Troffer Light
- Installation Hardware (Integral T-bar clips)
4. Specifikacije
| Broj modela | 2BLT4 40L ADP LP835 |
| Dimenzije (D x Š x V) | 47-3/4" x 23-3/4" x 2-3/8" |
| Light Output | 4000 lumena |
| Temperatura boje | 3500K neutralno bijela |
| Voltage | MVOLT (120-277V) |
| Zatamnjenje | 0-10V (smanjuje jačinu svjetla do 10%) |
| Materijal | Metal housing, Impact-modified acrylic diffuser |
| Certifikati | Damp-location rated, IC rated, CSA Certified |
| Težina | 17 funte |
| Garancija | 5 godine ograničene garancije |
5. Instalacija
The BLT Series LED Troffer is designed for easy installation in standard drop ceilings. Its shallow 2-3/8" depth accommodates restrictive plenum settings.
- Pripremite prostor za instalaciju: Ensure the power supply to the installation area is turned off at the circuit breaker. Clear any obstructions in the ceiling grid where the fixture will be installed.
- Position the Fixture: Carefully lift the LED troffer into the ceiling grid opening. The end plates feature integral T-bar clips designed for secure attachment to the T-grid.
- Osigurajte učvršćenje: Engage the T-bar clips to firmly hold the luminaire in place within the ceiling grid.
- Ožičenje: Access the wiring compartment. Connect the fixture's electrical wires to the building's power supply wires (line, neutral, and ground) according to local electrical codes. For dimming functionality, connect the 0-10V dimming wires to a compatible dimming control system.
- Zatvorite odjeljak za ožičenje: Ensure all wiring connections are secure and properly insulated. Close the wiring compartment cover.
- Vrati snagu: Nakon što je instalacija završena i svi priključci provjereni, vratite napajanje na prekidaču.
Video o instalaciji
Video 1: Official product video demonstrating the features and installation of the BLT Series Low Profile LED Drop in Ceiling Light.
6. Uputstvo za upotrebu
The Lithonia Lighting BLT Series LED Troffer provides instant-on illumination upon power activation. For models equipped with dimming capabilities:
- Kontrola zatamnjivanja: This fixture is compatible with 0-10V dimming systems, allowing you to adjust the light output down to 10% of its full brightness. Connect the fixture to a compatible 0-10V dimmer switch (sold separately) for variable light control.
- Kontrola za uključivanje/isključivanje: Koristite standardni zidni prekidač za uključivanje ili isključivanje rasvjetnog tijela.
7. Održavanje
The BLT Series LED Troffer Light is designed for minimal maintenance due to its long-life LED technology.
- čišćenje: To maintain optimal light output and appearance, periodically clean the acrylic diffuser with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the diffuser material.
- Nema dijelova koje može servisirati korisnik: The LED components and driver are integrated into the fixture. There are no user-serviceable parts inside. Do not attempt to open or repair the fixture, as this will void the warranty and could lead to electrical hazards.
8. Otkrivanje problema
If you encounter issues with your LED troffer light, refer to the following common troubleshooting steps:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali | Nema napajanja; Labavo ožičenje; Neispravan prekidač | Check circuit breaker; Verify all wiring connections are secure; Test the wall switch. |
| Svjetlo nepravilno treperi ili se prigušuje | Incompatible dimmer; Loose dimming wires | Ensure a compatible 0-10V dimmer is used; Check dimming wire connections. |
| Smanjena svjetlosna snaga | Dirty diffuser | Clean the diffuser with a soft, damp tkanina. |
Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se korisničkoj podršci.
9. Garancija i podrška
This Lithonia Lighting BLT Series 2x4 LED Troffer Light is backed by a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact Lithonia Lighting customer service. Keep your proof of purchase for warranty validation.
For more information, visit the official Lithonia Lighting website or refer to the product's packaging.