Hager SVN129 LED Pilot Light Instruction Manual

1. Uvod

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Hager SVN129 LED Pilot Light. The SVN129 is a compact indicator designed for electrical panels and control systems, featuring red, green, and orange LED illumination and operating on a 230V AC supply.

Molimo vas da pažljivo pročitate ovaj priručnik prije instalacije i sačuvate ga za buduću upotrebu.

2. Sigurnosne informacije

UPOZORENJE: Electrical installation should only be performed by qualified and authorized personnel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Uvijek isključite napajanje na glavnom prekidaču prije instaliranja ili servisiranja uređaja.
• Osigurajte da sve instalacije budu u skladu s lokalnim i nacionalnim električnim propisima.
• Ne koristite uređaj ako izgleda oštećeno.
• This device is designed for indoor use in dry locations unless otherwise specified.
• Provjeriti količinu zalihatage matches the device's rated voltage (230V AC).

3. Proizvod je gotovview

The Hager SVN129 is an LED pilot light designed for clear visual indication within electrical systems. Its key features include:

• LED osvjetljenje: Provides bright red, green, and orange light for status indication.
• Voltage Ocjena: Radi na 230V AC.
• Veličina modula: Occupies 1 module space in a standard electrical panel.
• Učestalost: Designed for 50/60 Hz systems.

Figure 1: Hager SVN129 LED Pilot Light. This image displays the front view of the SVN129 LED pilot light, highlighting its compact form factor suitable for integration into electrical panels. The indicator features a clear lens, designed to display red, green, or orange light depending on the operational status.

4. Postavljanje i instalacija

Installation of the Hager SVN129 LED Pilot Light should be carried out by a qualified electrician in accordance with all applicable electrical standards and regulations.

1. Isključivanje struje: Ensure the main power supply to the installation area is completely disconnected and secured against accidental re-connection.
2. Montaža: The SVN129 is designed for DIN rail mounting. Snap the device onto the DIN rail in the desired position within the electrical enclosure.
3. Ožičenje: Connect the 230V AC supply wires to the designated terminals on the pilot light. Refer to the wiring diagram on the device or packaging for correct polarity and connection points. Typically, these devices have two terminals for line and neutral connections.
4. Sigurne veze: Provjerite jesu li svi vijci terminala čvrsto zategnuti kako biste spriječili labave spojeve, što može uzrokovati pregrijavanje ili povremeni rad.
5. Potvrda: Double-check all wiring connections before restoring power.
6. Obnova napajanja: Restore power to the circuit. The pilot light should illuminate according to the circuit status it is monitoring.

5. Uputstvo za upotrebu

The Hager SVN129 LED Pilot Light operates as a visual indicator. Once correctly installed and connected to a 230V AC circuit, it will illuminate to indicate the status of that circuit or a specific condition within an electrical system.

• The specific color (red, green, or orange) displayed by the LED will depend on the model variant and the intended application for which it was selected.
• No user interaction is required for its operation beyond initial installation.

6. Održavanje

The Hager SVN129 LED Pilot Light is designed for minimal maintenance. However, periodic checks can ensure continued reliable operation.

• čišćenje: If necessary, gently wipe the surface of the pilot light with a soft, dry, or slightly damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• inspekcija: Periodically inspect the device for any signs of physical damage, discoloration, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
• Nema dijelova koje korisnik može servisirati: The LED pilot light contains no user-serviceable parts. Do not attempt to open or repair the unit.

7. Otkrivanje problema

If the Hager SVN129 LED Pilot Light is not functioning as expected, consider the following troubleshooting steps:

• Light Not Illuminating:
  • Check if the power supply to the circuit is active.
  • Verify that the pilot light is correctly wired and connections are secure.
  • Osigurajte dovod voltage je 230V AC.
  • If the above steps do not resolve the issue, the device may be faulty and require replacement by a qualified electrician.
• Intermitentni rad:
  • Provjerite ima li labavih spojeva ožičenja na terminalima.
  • Ensure stable power supply to the circuit.

For issues not covered here, contact a qualified electrician or Hager customer support.

8. Specifikacije

9. Garancija i podrška

For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Hager website. For technical support or inquiries, please contact Hager customer service through their official channels.

Napomena: Specifikacije i izgled proizvoda podložni su promjenama bez prethodne najave.