PerfectPrime GA0080 Portable Gas Leak Detector User Manual

1. Uvod

The PerfectPrime GA0080 is a portable gas leak detector designed to identify the presence of natural gas (NG), methane, propane, and butane. This device utilizes a catalytic method gas sensor to provide a quick and reliable indication of gas leaks, enhancing safety in residential and commercial environments. It features a visible LED alarm system and a clear display for gas concentration readings.

2. Važne informacije o sigurnosti

Please read all instructions carefully before using the PerfectPrime GA0080. Failure to follow these instructions may result in inaccurate readings, property damage, or personal injury.

• This device is intended for detecting combustible gases such as natural gas, methane, propane, and butane. It is not designed to detect carbon monoxide or other toxic gases.
• Ne izlažite uređaj ekstremnim temperaturama, vlazi ili direktnoj sunčevoj svjetlosti.
• Držite uređaj dalje od jakih elektromagnetnih polja.
• Ne pokušavajte popravljati ili modificirati uređaj. Za sve servisne radove obratite se kvalificiranom osoblju.
• Ensure proper ventilation when investigating a gas leak. If a significant leak is suspected, evacuate the area, shut off the gas supply, and contact emergency services.
• Always replace batteries with new ones of the specified type (AA 1.5V).

3. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• PerfectPrime GA0080 Portable Gas Leak Detector
• Uputstvo za upotrebu
• Note: 2 x AA 1.5V batteries are required and typically not included.

4. Proizvod je gotovview

Familiarize yourself with the components of your GA0080 gas leak detector.

Slika 4.1: Sveukupno view of the PerfectPrime GA0080 Portable Gas Leak Detector, highlighting the digital display and power button.

Slika 4.2: Close-up of the sensor end of the GA0080, showing the protective grille and ventilation holes for gas detection.

Slika 4.3: Side view of the GA0080, illustrating the three LED indicators (green, yellow, red) for visual alarm signals.

• Glava senzora: Located at the tip, responsible for detecting gas.
• Digitalni prikaz: Shows gas concentration in ppm.
• Dugme za napajanje: Uključuje/isključuje uređaj.
• LED indikatori: Provide visual alarm signals (Green, Yellow, Red).
• Pretinac za baterije: Houses two AA 1.5V batteries.

5. Podešavanje

5.1 Instalacija baterije

1. Pronađite poklopac odjeljka za bateriju na stražnjoj strani uređaja.
2. Pomaknite ili otkačite poklopac da biste otvorili pretinac.
3. Insert two (2) AA 1.5V batteries, ensuring correct polarity (+/-).
4. Čvrsto zatvorite poklopac odeljka za baterije.

Note: Always use fresh batteries for optimal performance. Remove batteries if the device will not be used for an extended period.

6. Operacija

6.1 Uključivanje i zagrijavanje

1. Pritisnite i držite dugme za napajanje dok se uređaj ne uključi.
2. The device will enter a warm-up phase, which takes approximately 200 seconds. During this time, the display may show a countdown or "Warm Up".
3. Once warm-up is complete, the device is ready for use, and the display will show "0 ppm" or a low background reading.

6.2 Detecting Gas Leaks

• Move the sensor head slowly along gas lines, connections, and potential leak points.
• The device detects gas in the range of 0 to 9999 ppm with a resolution of 100 ppm.
• Visual Alarm Indicators:
  • Zelena LED: Indicates normal operation or very low gas levels.
  • Žuta LED dioda: Illuminates when gas concentration reaches approximately 2% LEL (Lower Explosive Limit), indicating a potential leak.
  • Crveni LED: Illuminates when gas concentration reaches approximately 10% LEL, indicating a significant leak and a higher risk.
• An audible alarm (2.713kHz / 100ms) will also sound when gas levels exceed the alarm thresholds.
• The digital display will show the detected gas concentration in parts per million (ppm).

6.3 Isključivanje

Press and hold the Power button until the device turns off.

7. Održavanje

• čišćenje: Obrišite uređaj mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura. Izvadite baterije ako ga skladištite duži period.
• Održavanje senzora: Avoid exposing the sensor head to liquids, dust, or harsh chemicals, as this can affect its accuracy and lifespan.

8. Otkrivanje problema

9. Specifikacije

10. Garancija i podrška

For warranty information or technical support, please contact PerfectPrime customer service. Refer to the product packaging or the official PerfectPrime webstranicu za najnovije kontakt podatke.

Webstranica: www.perfectprime.com