1. Uvod
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Inspire One-Light LED Flush Mount, Model P3696-2030K9. Please read these instructions thoroughly before beginning installation and retain them for future reference. This fixture features an antique bronze finish, an etched glass diffuser, and an off-white linen shade, designed for indoor residential use.
2. Sigurnosne informacije
- UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje na prekidaču ili kutiji s osiguračima prije instalacije ili servisiranja.
- Svi električni priključci moraju biti u skladu s lokalnim propisima, uredbama ili Nacionalnim električnim kodeksom (NEC). Konsultujte se s kvalificiranim električarem ako niste upoznati s električnim ožičenjem.
- Koristite samo žičane konektore s UL/cUL certifikatom.
- This product is designed for indoor use only. Do not install in wet locations.
- Osigurajte da je rasvjetno tijelo sigurno montirano na konstrukcijski čvrst dio stropa.
- Prijedlog 65 Upozorenje: Ovaj proizvod može sadržavati hemikalije za koje država Kalifornija zna da izazivaju rak i urođene nedostatke ili drugu reproduktivnu štetu.
3. Sadržaj paketa
Prije početka instalacije provjerite jesu li sve komponente prisutne. Ako bilo koji dijelovi nedostaju ili su oštećeni, nemojte pokušavati sastavljati ili instalirati proizvod.
- LED Flush Mount Fixture (P3696-2030K9)
- Komplet hardvera za montažu
- Installation Sheet (this document)
Figure 1: Progress Lighting Inspire LED Flush Mount Fixture (P3696-2030K9) in Antique Bronze. This image shows the complete assembled light fixture.
4. Specifikacije
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. |
|
|
| Svjetlo nepravilno treperi ili se prigušuje. |
|
|
| Fixture does not sit flush with the ceiling. |
|
|
Figure 2: Dimensional drawing of the Inspire LED Flush Mount, showing a 13-inch diameter and 6-inch height.
5. Postavljanje i instalacija
Prije nego počnete: Ensure power is disconnected at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, electrical tape, safety glasses).
- Pripremite montažnu ploču: Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure it is secure.
- Električni priključci:
- Povežite zelena ili gola bakrena žica za uzemljenje od mjesta održavanja do zelena ili gola bakrena žica za uzemljenje from the junction box using a wire connector.
- Povežite bijela žica od mjesta održavanja do bijela (neutralna) žica from the junction box using a wire connector.
- Povežite crna žica od mjesta održavanja do crna (vruća) žica from the junction box using a wire connector.
- Uvjerite se da su svi spojevi čvrsti i sigurni.
- Montirajte uređaj: Carefully push the wired fixture up to the ceiling, aligning the mounting holes on the fixture with the screws on the mounting plate. Secure the fixture with the decorative nuts or screws provided.
- Ugradnja sjenila i difuzora: Place the etched glass diffuser into the fixture, followed by the off-white linen shade. Secure them according to the specific design of your fixture (e.g., with a finial or retaining ring).
- Vrati snagu: Nakon što je instalacija završena i sve komponente su sigurnosno osigurane, vratite napajanje na prekidaču.
Note: For detailed diagrams, refer to the separate installation sheet included with your product.
6. Uputstvo za upotrebu
The Progress Lighting Inspire LED Flush Mount is operated via a standard wall switch. If connected to a compatible dimmer switch, the light output can be adjusted to your desired brightness level.
- Uključivanje/isključivanje: Flip the wall switch connected to the fixture to turn the light on or off.
- Funkcija zatamnjivanja: If a compatible dimmer switch is installed, rotate or slide the dimmer control to adjust the light intensity. Ensure your dimmer switch is rated for LED lighting.
7. Održavanje
To ensure the longevity and appearance of your fixture, follow these maintenance guidelines:
- čišćenje: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- Njega sjenila: The linen shade can be gently dusted with a soft brush or vacuumed with a brush attachment. Avoid getting the shade wet.
- LED izvor svjetla: Integrisani LED izvor svjetlosti je dizajniran za dugotrajnu upotrebu i korisnik ga ne može zamijeniti.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. |
|
|
| Svjetlo nepravilno treperi ili se prigušuje. |
|
|
| Fixture does not sit flush with the ceiling. |
|
|
9. Garancija i podrška
Ovaj proizvod tvrtke Progress Lighting pokriven je 5-godišnja ograničena garancija. This warranty guarantees your complete satisfaction and includes professional after-sales customer service support.
For warranty claims, technical assistance, or missing parts, please contact Progress Lighting customer service. Refer to the official Progress Lighting webstranicu za ažurne kontakt informacije.
Online resursi: Posjetite trgovinu Progress Lighting na Amazonu
