Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Nutone 763N BROAN-NUTONE Ventilation Fan with Light. This unit is designed to provide efficient ventilation and bright illumination in one integrated system, ensuring a comfortable and well-lit environment.
The Nutone 763N features quiet operation, an attractive grille, and a plug-in motor and light for ease of use and maintenance. Please read this manual thoroughly before installation and operation to ensure safe and proper use of the product.
Sigurnosne informacije
UPOZORENJE: Da biste smanjili rizik od požara, strujnog udara ili ozljeda osoba, obratite pažnju na sljedeće:
- Uvijek isključite napajanje na servisnoj ploči prije servisiranja ili čišćenja uređaja.
- Radove na instalaciji i električnom ožičenju mora obaviti kvalifikovana(e) osoba(e) u skladu sa svim važećim kodeksima i standardima, uključujući građevinske propise i standarde otporne na vatru.
- Koristite ovu jedinicu samo na način predviđen od strane proizvođača. Ako imate pitanja, obratite se proizvođaču.
- This unit is suitable for use over a tub or shower enclosure when installed in a GFCI protected branch circuit.
- Do not use with solid state speed controls.
- Nije za upotrebu u kuhinjama.
- Tip IC za upotrebu sa toplotnom izolacijom.
Product Overview
The Nutone 763N combines a ventilation fan and an incandescent light in a single, compact unit. Key features include:
- Efikasna ventilacija: Provides 50 CFM (Cubic Feet per Minute) air delivery to effectively remove moisture and odors.
- tihi rad: Engineered for a sound level of 2.5 Sones, ensuring minimal noise disruption.
- Integrisana rasvjeta: Features a translucent white polymeric lens for diffused light, using one (1) 100W maximum A19 incandescent bulb (bulb not included).
- Odvojene kontrole: Fan and light can be operated independently or together, depending on your needs.
- Izdržljiva konstrukcija: Housing made of galvanized steel with a white polymeric grille.
Slika 1: Pod uglom view of the Nutone 763N Ventilation Fan with Light, showing the white grille and translucent light cover.
Slika 2: Od vrha prema dolje view of the Nutone 763N, highlighting the square light and surrounding ventilation grilles.
Postavljanje i instalacija
Installation instructions are included with each unit. A mounting flange is provided for secure installation. Ensure all local electrical codes and safety regulations are followed during installation.
Kontrolna lista prije instalacije:
- Verify power is disconnected at the service panel.
- Ensure the installation location is suitable (e.g., not in kitchens, suitable for GFCI protected circuits over tubs/showers).
- Confirm duct size is 4 inches in diameter for proper connection.
- Prepare necessary tools and materials (e.g., wiring, fasteners, screwdriver).
Koraci instalacije:
- Carefully unpack the unit and inspect for any damage.
- Position the housing (8¼" x 8" x 5¾") in the desired ceiling location, utilizing the provided mounting flange for secure attachment.
- Connect the 4-inch diameter ductwork to the fan's duct connector.
- Perform electrical wiring connections according to local codes. The unit operates on 120 VAC, 60 Hz, 1.6 A. Ensure a GFCI protected branch circuit if installing over a tub or shower.
- Install one (1) 100W maximum A19 incandescent bulb (not included) into the lamp socket.
- Attach the white polymeric grille (12" x 10¾") and translucent white polymeric lens to the housing.
- Restore power at the service panel and test the fan and light functions.
Slika 3: Bočna strana view illustrating the 4-inch duct connection point on the fan housing.
Uputstvo za upotrebu
The Nutone 763N Ventilation Fan with Light is designed for straightforward operation. The fan and light functions can be controlled independently or simultaneously, depending on your wiring setup and switch configuration.
- Rad ventilatora: Activate the fan using the designated wall switch. The fan will begin to draw air, removing moisture and odors from the room.
- Lagani rad: Activate the light using its dedicated wall switch. The incandescent bulb will provide illumination through the diffused lens.
- Combined Operation: If wired to a single switch or a dual-function switch, both the fan and light can be turned on or off together.
For optimal performance, it is recommended to operate the fan during and after activities that generate moisture, such as showering, to prevent humidity buildup and potential mildew growth.
Figure 4: The Nutone 763N fan and light unit seamlessly installed in a bathroom ceiling, providing both ventilation and overhead lighting.
Održavanje
Regular maintenance will ensure the longevity and efficient operation of your Nutone 763N unit. Always disconnect power at the service panel before performing any maintenance.
Cleaning the Grille and Lens:
- Gently pull down the grille to detach it from the housing.
- Remove the translucent lens.
- Wash the grille and lens with mild soap and water. Rinse thoroughly and dry completely before reattaching.
Cleaning the Blower Wheel:
- With the grille removed, carefully wipe down the one-piece molded polymeric blower wheel with a damp tkanina.
- Izbjegavajte korištenje abrazivnih sredstava za čišćenje ili otapala.
Zamjena žarulje:
- Uvjerite se da je napajanje isključeno.
- Remove the grille and lens.
- Carefully unscrew the old A19 incandescent bulb.
- Screw in a new 100W maximum A19 incandescent bulb.
- Reattach the lens and grille.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Ventilator ne radi. | No power to the unit; faulty switch; motor issue. | Check circuit breaker/fuse. Verify wall switch is functional. Consult a qualified electrician if issues persist. |
| Svjetlo se ne pali. | Burned out bulb; no power to the unit; faulty switch. | Replace bulb. Check circuit breaker/fuse. Verify wall switch is functional. |
| Ventilator je bučan. | Dirty blower wheel; loose mounting; obstruction in duct. | Clean blower wheel. Ensure unit is securely mounted. Check ductwork for obstructions. |
| Loša ventilacija. | Dirty blower wheel; obstructed ductwork; incorrect duct size. | Clean blower wheel. Clear any duct obstructions. Ensure 4-inch duct is used. |
Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Nutone |
| Naziv modela | 763N |
| Kapacitet protoka zraka | 50 kubnih stopa u minuti (CFM) |
| Nivo buke | 2.5 zvukova |
| Dimenzije kućišta | 8¼" x 8" x 5¾" |
| Dimenzije rešetke | 12" x 10¾" |
| Veličina kanala | 4 inča prečnika |
| Lamp Tip | Incandescent (100W max A19, bulb not included) |
| Električna ocjena | 120 VAC, 60 Hz, 1.6 A (with one 100W bulb) |
| Materijal kućišta | Pocinčani čelik |
| Materijal rešetke | White Polymeric |
| Materijal sočiva | Translucent White Polymeric |
| Motor | Plug-in, permanently lubricated |
| Puhalo | One-piece polymeric, 4¾" diameter |
| Vrsta instalacije | Mounting flange provided, Type IC for thermal insulation |
Garancija i podrška
For specific warranty information and details regarding your Nutone 763N Ventilation Fan with Light, please refer to the warranty card included with your product packaging or visit the official Nutone webSačuvajte račun kao dokaz o kupovini u slučaju bilo kakvih reklamacija.
If you require technical assistance, replacement parts, or have questions not covered in this manual, please contact Nutone Customer Service. Contact information can typically be found on the product packaging or the official Nutone website.
