Arnott P-2935 Air Suspension Compressor User Manual

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your Arnott P-2935 Air Suspension Compressor. Please read this manual thoroughly before proceeding with any procedures to ensure correct usage and to maximize the lifespan of the product. This compressor is designed for 1998-2002 Lincoln Town Car models.

Slika 1.1: The Arnott P-2935 Air Suspension Compressor. This image displays the complete compressor unit with its integrated dryer, intake air hose, and electrical connectors, ready for installation.

2. Sigurnosne informacije

Always prioritize safety when working with automotive components. Improper installation or maintenance can lead to vehicle damage or personal injury. It is recommended that installation be performed by a qualified professional.

• Ensure the vehicle is properly supported on a level surface before beginning any work.
• Disconnect the vehicle's battery before working on electrical components.
• Nosite odgovarajuću ličnu zaštitnu opremu, uključujući zaštitne naočale i rukavice.
• Za specifične postupke i specifikacije momenta pritezanja pogledajte servisni priručnik vašeg vozila.

Slika 2.1: Warning regarding cracked air springs. This image shows three examples of damaged air springs with cracks and wear, emphasizing that such conditions must be addressed to validate the compressor's warranty and prevent continuous operation leading to overheating.

WARNING: Cracked air springs must be changed to validate the warranty on the compressor. Continuous operation with cracked air springs will cause the compressor to overheat.

3. Prior to Installation: Diagnosis Checklist

Before installing a replacement air suspension compressor, it is crucial to review the following checklist. Air suspension compressor failure is generally the result of failure(s) in other system components, such as the compressor relay, fuses, leaking air bladder(s), valve block, or air lines/fittings.

Slika 3.1: Compressor Diagnosis Checklist. This image displays a detailed checklist to be followed before installing a new air suspension compressor, covering suspension system codes, fuses, relays, connections, VOSS fitting and valve connections, height sensors, air springs and full strut assembly, valve block, and air lines.

1. Suspension system codes: Obavezno ponovoview all Diagnostic Trouble Codes (DTCs) prior to new compressor installation.
2. Fuses and relays: Check for blown fuses and ensure the relay is working properly. A failed compressor relay is a top cause of air compressor failure. They normally fail in the "closed" position and should be replaced during compressor installation.
3. Veze: Verify that the air line and wiring harnesses are connected without signs of physical damage.
4. VOSS fitting and valve connections: Ensure that the VOSS fittings and valve connections are fully seated and undamaged. Make sure that the airline is secured at the proper depth.
5. Height sensors: Check the electrical connections and the orientation of the height sensor arms.
6. Damage to air springs and full strut assembly: Inspect the air springs and/or air struts for any signs of excessive wear or moisture. Moisture in the system is generally an indicator of a leak elsewhere in the system.
7. Valve block: Check all valve block connections and fittings; inspect for any cracks or other damage.
8. All airlines: Inspect the air lines for kinks, holes, or other damage.

MAKE SURE ALL DOORS, HOOD AND TRUNK ARE CLOSED COMPLETELY before and after installation procedures.

4. Smjernice za instalaciju

The Arnott P-2935 Air Suspension Compressor is designed for direct replacement in compatible vehicles. It includes a dryer and intake air hose for a complete installation.

Slika 4.1: Side view of the Arnott P-2935 Air Suspension Compressor. This angle highlights the robust mounting bracket and the integrated electrical connections.

While specific step-by-step instructions are beyond the scope of this general manual, the following points are critical:

• Uvijek pogledajte servisni priručnik vašeg vozila za detaljne postupke uklanjanja i ugradnje.
• Ensure all connections, including electrical and air lines, are secure and free from leaks after installation.
• After installation, some vehicles require suspension initialization. Refer to the proper service manual for your vehicle's process. Examples of suspension initialization include turning the wheel lock to lock, or driving the vehicle over a particular speed.

Slika 4.2: Arnott P-2935 Air Suspension Compressor in its original packaging. This image shows the compressor unit as it would appear when unboxed, emphasizing genuine Arnott branding.

5. Operacija

The Arnott P-2935 Air Suspension Compressor operates automatically, controlled by your vehicle's air suspension system. It maintains the correct ride height by supplying compressed air to the air springs as needed.

• The compressor will activate when the vehicle's ride height sensors detect a drop below the programmed level.
• Normal operation may involve intermittent activation, especially after loading the vehicle or during changes in temperature.
• Unusual noises, frequent cycling, or failure to maintain ride height may indicate a system issue requiring inspection.

Slika 5.1: Alternativa view of the Arnott P-2935 Air Suspension Compressor. This perspective provides a closer look at the motor and various components, including the heavy-duty construction.

6. Održavanje

The Arnott P-2935 Air Suspension Compressor is designed for durability and a long service life, featuring a heavy-duty motor and an epoxy electro-coated finish to prevent corrosion. Regular maintenance of the overall air suspension system is crucial for the longevity of the compressor.

• Inspekcija sistema: Periodically inspect air lines, connections, and air springs for any signs of leaks, cracks, or damage. Address any issues promptly to prevent overworking the compressor.
• Dryer Function: The integrated dryer helps remove moisture from the air system. Ensure the system remains sealed to prevent excessive moisture ingress.
• čistoća: Keep the compressor area free from excessive dirt and debris to ensure proper ventilation and operation.

7. Otkrivanje problema

If you experience issues with your air suspension system, consider the following common troubleshooting steps:

• Compressor Not Activating: Check fuses and relays related to the air suspension system. Verify electrical connections to the compressor.
• Vehicle Not Reaching Ride Height: Inspect air springs, air lines, and valve block for leaks. A significant leak will prevent the system from pressurizing.
• Compressor Running Constantly: This often indicates a leak in the air suspension system, causing the compressor to overwork to maintain pressure. Refer to the "Prior to Installation: Diagnosis Checklist" in Section 3 for a thorough inspection.
• Neobični zvukovi: Investigate any grinding, squealing, or excessive vibration. This could indicate a mechanical issue with the compressor or its mounting.

For persistent issues, consult a qualified automotive technician or contact Arnott customer support.

8. Specifikacije proizvoda

9. Garancija i podrška

Arnott is committed to the quality of its products. If you have a question or problem with any Arnott product, please contact Arnott by calling 800-251-8993 tokom uobičajenog radnog vremena ili putem e-pošte techassistance@arnottinc.com.

For customers in the EU, please call +31 (0)73 7850 580 ili emailom info@arnotteurope.com.

Please retain your proof of purchase for warranty claims. The warranty may be voided if the product is installed incorrectly or if underlying system issues (such as cracked air springs) are not addressed, leading to compressor failure.