1. Uvod
The Xfinity XR2 Remote Control is designed to provide seamless control over your Xfinity HD and HD-Digital Receivers, as well as your television and audio devices. This manual will guide you through the process of setting up, operating, and maintaining your remote control.
Image: Two Xfinity XR2 remote controls, highlighting their design and button layout.
2. Podešavanje
2.1. Instalacija baterije
Your XR2 remote requires four (4) AA batteries. To install:
- Pronađite poklopac pretinca za baterije na stražnjoj strani daljinskog upravljača.
- Pomaknite poklopac prema dolje i podignite ga.
- Insert the four AA batteries, ensuring the positive (+) and negative (-) terminals align with the indicators inside the compartment.
- Vratite poklopac pretinca za baterije tako što ćete ga gurnuti nazad na mjesto dok ne klikne sigurno.
2.2. Initial Programming and Pairing
The XR2 remote can operate in either Infrared (IR) or Radio Frequency (RF) mode. For older Cisco HD DVRs or similar models, you may need to configure it for IR output.
2.2.1. Configuring for IR Mode (if needed)
- Pritisnite i držite Setup button (located at the very bottom left of the remote) until the red LED light at the top of the remote turns green.
- Pritisnite A key (located above the numeric keys). The green light will flash three times, indicating the remote is now configured for IR output.
- The remote should now be ready for use with your DVR.
2.2.2. Programming for TV and Audio Devices
To control your television or audio receiver, you will need to program the remote using specific 5-digit codes provided in the accompanying pamphlet or available from Xfinity support. Follow the instructions provided with your remote for TV code entry.
3. Uputstvo za upotrebu
The XR2 remote features a variety of buttons for controlling your Xfinity DVR and connected devices. Familiarize yourself with the layout and functions below:
- Power (All Power): Turns on/off your TV and DVR simultaneously.
- TV ulaz: Cycles through video inputs on your television.
- VOL +/-: Adjusts the volume of your television or audio receiver.
- Isključi zvuk: Isključuje ili uključuje zvuk.
- CH +/-: Changes channels on your DVR.
- Search (Q): Accesses the search function.
- Transport Controls (Play, Pause, Rewind, Fast Forward, Stop, Record): Controls playback of live TV and recorded content.
- Xfinity/Menu: Accesses the Xfinity menu.
- vodič: Prikazuje programski vodič.
- OK/Odaberi: Confirms selections and opens menus.
- Strelice za navigaciju: Moves through menus and guide listings.
- Pg Up/Down: Scrolls through pages in the guide or menus.
- posljednje: Vraća se na prethodno viewed channel.
- Info: Prikazuje informacije o trenutnom programu.
- Izlaz: Exits menus or guides.
- Omiljeno: Pristupa vašoj listi omiljenih kanala.
- A, B, C, D Buttons: Context-sensitive buttons for various functions within menus.
- Numerička tastatura (0-9): Direktno unosi brojeve kanala.
- Postavljanje: Koristi se za programiranje daljinskog upravljača.
- prostor: Used for text entry.
- Zamjena: Swaps between two tuners on compatible DVRs.
4. Održavanje
To ensure the longevity and optimal performance of your XR2 remote control, follow these maintenance guidelines:
- čišćenje: Use a soft, dry cloth to wipe the remote. For stubborn dirt, slightly dampOperite krpu vodom ili blagim, neabrazivnim sredstvom za čišćenje. Izbjegavajte prekomjernu vlagu.
- Zamjena baterije: Replace batteries when the remote's response becomes sluggish or the LED indicator does not light up consistently. Always replace all four batteries at the same time with new AA alkaline batteries.
- Skladištenje: Daljinski upravljač čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
- Izbjegavajte kapi: Zaštitite daljinski upravljač od fizičkih udara, jer padovi mogu oštetiti unutrašnje komponente.
5. Otkrivanje problema
If you encounter issues with your XR2 remote, try the following solutions:
- Daljinski ne reaguje:
- Provjerite jesu li baterije pravilno umetnute i jesu li dovoljno napunjene. Zamijenite ih ako je potrebno.
- Ensure there is a clear line of sight between the remote and your DVR/TV if operating in IR mode.
- Remote Not Controlling TV/Audio:
- Re-attempt the TV/audio programming steps using the correct 5-digit code for your device.
- Verify that the remote is configured for the correct mode (IR or RF) as described in Section 2.2.1.
- Remote Needs Reset:
- If the remote is behaving erratically, you can perform a factory reset. Press and hold the Setup button until the LED turns green, then enter 9-8-1. The LED will flash, indicating a successful reset. You will then need to re-program the remote.
- Dugmad ne rade:
- Pazite da se ispod dugmadi ne zaglave ostaci.
- If only specific buttons are not working, the remote may be faulty and require replacement.
6. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | XR2 (4330948498) |
| Dimenzije proizvoda | 7.99 x 5.98 x 2.01 inča |
| Težina artikla | 13.6 unce |
| Baterije su potrebne | 4 AA baterija |
| Tehnologija povezivanja | infracrveni (IR) |
| Kompatibilni uređaji | HDTV, DVR, Television |
| Maksimalni broj podržanih uređaja | 1 (DVR/TV combination) |
| Posebna karakteristika | Ergonomski dizajn |
| Proizvođač | Xfinity |
7. Garancija i podrška
For warranty information or technical support, please refer to the documentation provided with your Xfinity service or visit the official Xfinity support website. You may also contact Xfinity customer service directly for assistance with your XR2 remote control.
