MIDAS DM16 User Manual

1. Uvod

This manual provides comprehensive instructions for the operation and maintenance of your MIDAS DM16 16 Input Analogue Live and Studio Mixer. The DM16 is designed for both live performance and studio recording environments, featuring award-winning MIDAS microphone preamplifiers and robust construction.

Please read this manual thoroughly before operating the device to ensure proper usage and to maximize its lifespan.

Slika 1.1: Prednji ugao view of the MIDAS DM16 mixer.

2. Podešavanje

2.1 Raspakivanje i pregled

Upon receiving your MIDAS DM16, carefully unpack the unit and inspect it for any signs of damage that may have occurred during transit. Retain the original packaging materials for future transport or storage.

Uključeno u kutiju:

• MIDAS DM16 analogni mikser uživo i studijski mikser sa 16 ulaza
• Kabl za napajanje
• Korisnički priručnik (ovaj dokument)

2.2 Priključak za napajanje

The DM16 operates on a standard AC power supply. Connect the provided power cord to the AC inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the power switch is in the 'Off' position before connecting to power.

Figure 2.1: Rear panel of the MIDAS DM16 showing power input and warnings.

2.3 Ulazne i izlazne veze

The DM16 features a variety of input and output options for connecting microphones, instruments, and other audio devices.

• Ulazi za mikrofon: 12 mono input channels with XLR connectors for microphones. These channels feature MIDAS microphone preamplifiers.
• Linijski ulazi: 2 electronically-balanced stereo line input channels on 1/4" TRS connectors for instruments or line-level devices.
• Glavni izlazi: Connect to your main PA system or recording interface.
• Aux slanja: For monitor mixes or effects sends.
• Izlaz za slušalice: For monitoring audio.

Slika 2.2: Vrh view of the MIDAS DM16 showing all input/output connections and controls.

3. Uputstvo za upotrebu

3.1 Kontrole kanala

Each mono input channel on the DM16 features the following controls:

• DOBITAK: Adjusts the input sensitivity for the microphone preamplifier.
• EQ: A 3-band equalizer with a swept mid-band for precise tone shaping.
  

  Slika 3.1: Detaljno view of the 3-band EQ section on a mono channel.

• AUX 1/2: Controls the level sent to the auxiliary outputs. These can be switched pre/post fader.
  

  Figure 3.2: Aux masters section with pre/post fader switching.

• PAN: Podešava stereo poziciju kanala.
• MUTE: Utišava kanal.
• PEAK LED: Označava kada se ulazni signal prekida.
• FADER: Controls the output level of the channel to the main mix.
  

  Figure 3.3: Channel faders for precise level control.

3.2 Fantomsko napajanje

The DM16 provides +48V phantom power for condenser microphones. This is a global switch, meaning it applies to all microphone inputs simultaneously. Ensure all connections are made before activating phantom power to prevent damage to non-phantom powered devices.

Figure 3.4: Phantom power switch.

3.3 Monitoring

Use the headphone output and monitor controls to listen to the main mix or specific auxiliary sends. The monitor section includes controls for local monitor and phones output levels.

Figure 3.5: Monitor and headphone controls.

4. Održavanje

Proper maintenance ensures the longevity and optimal performance of your MIDAS DM16 mixer.

• čišćenje: Use a soft, dry cloth to clean the exterior of the mixer. Avoid abrasive cleaners or solvents that could damage the finish or controls.
• Zaštita od prašine: Keep the mixer covered when not in use to prevent dust accumulation, especially around faders and knobs.
• ventilacija: Osigurajte dovoljan protok zraka oko uređaja kako biste spriječili pregrijavanje. Ne blokirajte ventilacijske otvore.
• Skladištenje: Mikser čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

5. Otkrivanje problema

This section addresses common issues you might encounter with your DM16 mixer.

• Nema napajanja:
  • Check if the power cord is securely connected to both the mixer and the power outlet.
  • Provjerite je li utičnica funkcionalna.
  • Provjerite je li prekidač za napajanje na zadnjoj ploči u položaju 'Uključeno'.
• Nema izlaza zvuka:
  • Provjerite sve priključke ulaznih i izlaznih kablova.
  • Ensure channel faders and the main mix fader are raised.
  • Verify that the MUTE buttons on active channels are not engaged.
  • Check the gain settings for each channel.
  • Confirm that your connected speakers or monitoring system are powered on and functioning correctly.
• izobličeni zvuk:
  • Reduce the GAIN setting on the input channel if the PEAK LED is frequently illuminating.
  • Lower the output level of the connected source device.
  • Provjerite ima li neispravnih kablova.
• Brujanje ili šum:
  • Provjerite da li su svi kablovi pravilno zaštićeni i u dobrom stanju.
  • Provjerite ima li petlji uzemljenja; pokušajte spojiti svu audio opremu na isti produžni kabel.
  • Držite audio kablove dalje od kablova za napajanje.

Ako naiđete na probleme koji nisu ovdje obuhvaćeni, pogledajte odjeljak za podršku.

6. Specifikacije

7. Garancija i podrška

7.1 Informacije o garanciji

Your MIDAS DM16 mixer is covered by a limited warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official MIDAS webstranicu za detaljne uslove i odredbe garancije.

Napomena: The warranty may not cover damage caused by improper use, unauthorized modifications, or natural disasters.

7.2 Korisnička podrška

For technical assistance, troubleshooting, or service inquiries, please contact MIDAS customer support through their official webweb-mjesto ili kontakt informacije navedene u dokumentaciji vašeg proizvoda.

Online resursi:

• Official MIDAS Webstranica: www.midasconsoles.com
• Product Support Page: (Specific link if available, otherwise general websajt)

When contacting support, please have your product model number (DM16) and serial number ready.