Uvod
This manual provides essential instructions for the safe and efficient use of your UpBright 12V AC/DC Adapter. Please read this manual thoroughly before using the product and retain it for future reference. This adapter is designed to provide stable power to compatible electronic devices requiring 12V DC input.
Sigurnosne informacije
Your UpBright AC/DC Adapter is equipped with multiple safety features to protect your devices and ensure safe operation:
- OVP (Preko Voltage Output Protection): Automatically shuts down the adapter if the output voltage exceeds a safe level, preventing damage to your connected device.
- OCP (Over Current Output Protection): Disables the output if the current draw exceeds the adapter's maximum capacity, protecting both the adapter and the connected device from overload.
- SCP (Short Circuit Output Protection): Prevents damage in the event of a short circuit in the connected device or cable, by immediately cutting off power output.
Always ensure the adapter is used in a well-ventilated area and avoid covering it during operation. Do not expose the adapter to water or excessive moisture. Disconnect the adapter from the power outlet when not in use for extended periods.
Product Overview
The UpBright 12V AC/DC Adapter is a reliable power supply unit designed for various electronic devices. It converts standard AC wall power to a stable 12V DC output, suitable for devices requiring 1A (1000mA) current.
Image: The UpBright 12V AC/DC Adapter, showing the main unit with a standard US plug and the attached DC barrel connector cable.
Šta je u kutiji:
- 1 x UpBright 12V AC/DC Adapter
Note: Some packages may include 2 adapters as per product listing details.
Setup
- Provjerite kompatibilnost: Ensure your device requires a 12V DC input and has a compatible barrel-type power input port. The adapter provides 1A (1000mA) output.
- Povežite se na uređaj: Insert the barrel connector of the adapter cable firmly into the power input port of your electronic device.
- Spojite na utičnicu: Plug the AC prongs of the adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
- Uređaj za uključivanje: Once connected, power on your electronic device.
Slika: Krupni plan view of the barrel connector tip, illustrating its design for proper connection to compatible devices.
For international use, ensure you have the correct physical plug adapter for your region. The UpBright adapter supports a wide input voltage opseg (100-240VAC).
Slika: pramples of international plug adapters (AU, EU, UK) and a representation of the UpBright Limited Warranty Certificate, indicating global compatibility and product assurance.
Uputstvo za upotrebu
The UpBright AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a continuous 12V DC power supply. No user intervention is required during normal operation.
- Prije uključivanja uređaja provjerite jesu li svi priključci sigurni.
- Monitor your device for proper function after connecting the adapter.
- If the adapter feels excessively hot, disconnect it immediately and check for proper ventilation or potential device issues.
Održavanje
The UpBright AC/DC Adapter requires minimal maintenance to ensure long-term performance:
- čišćenje: Prije čišćenja isključite adapter iz svih izvora napajanja. Za brisanje vanjske strane koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili rastvarače.
- Skladištenje: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adapter to prevent damage to the wiring.
- inspekcija: Periodically inspect the adapter and its cable for any signs of damage, such as frayed wires, bent prongs, or cracks in the casing. If damage is found, discontinue use and replace the adapter.
Rješavanje problema
If you encounter issues with your UpBright AC/DC Adapter, refer to the following common troubleshooting steps:
- Uređaj se ne uključuje:
- Provjerite je li adapter sigurno priključen i u zidnu utičnicu i u vaš uređaj.
- Provjerite da li zidna utičnica radi tako što ćete uključiti drugi uređaj.
- Verify that your device's power requirements (voltage i amperage) match the adapter's output (12V, 1A).
- Inspect the adapter cable and connector for any visible damage.
- Adapter se zagrije na dodir:
- A slight warmth is normal during operation. However, if the adapter is excessively hot, disconnect it immediately.
- Pazite da se adapter nalazi u dobro prozračenom prostoru i da nije pokriven.
- Confirm that your device is not drawing more current than the adapter's 1A capacity, which could trigger OCP.
- Intermitentna snaga:
- Check for loose connections at both the wall outlet and the device.
- Examine the barrel connector for any debris or damage that might prevent a solid connection.
If these steps do not resolve the issue, contact UpBright customer support for further assistance.
Specifikacije
| Brand | UPBRIGHT |
| Brojevi modela | XY-1201000U, XY-1201000-U, XY-1201000-E, XY12S-1201000Q-UZ, XY12S-1201000QUZ, XY125-1201000Q-UZ |
| Ulazni voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 12V DC |
| Izlaz AmpDob | 1A (1000mA) |
| Wattage | 12 Watts |
| Tip konektora | Barrel Connector |
| Sigurnosne karakteristike | OVP, OCP, SCP Protection |
| Težina artikla | 3 unce |
| Boja | Crna |
Garancija i podrška
UpBright products are designed for reliability and performance. This adapter comes with the following warranty and support:
- Politika povrata novca: Povrat novca u roku od 30 dana.
- Politika razmjene: Zamjena na 24 mjeseca.
For warranty claims, technical support, or any inquiries, please contact UpBright customer service. Refer to your purchase documentation for specific contact details or visit the official UpBright website.





