BONTEC MTR-B2 2-Tier Wood Monitor Stand Riser Instruction Manual

Uvod

This manual provides instructions for the assembly, operation, and maintenance of your BONTEC MTR-B2 2-Tier Wood Monitor Stand Riser. This product is designed to elevate your monitor to an ergonomic height, reduce neck and back strain, and organize your workspace with its integrated storage and cable management features.

Karakteristike proizvoda

Materijali vrhunskog kvaliteta: Constructed from eco-friendly MDF wood with a smooth finish for durability and stability.
Ergonomski dizajn: Elevates your screen by 5.6 inches to eye level, promoting healthier posture and reducing strain.
Spacious 2-Tier Storage: Obezbeđuje ample space (21.3 inches wide) for laptops, keyboards, and other desk essentials.
Integrisano upravljanje kablovima: Features a built-in system and cellphone holder to keep your workspace organized and clutter-free.
Jednostavna montaža: Designed for quick and straightforward assembly.
Stabilan dizajn: Includes soft rubber feet to ensure stability and protect your desk surface.

Diagram illustrating ergonomic benefits of a monitor stand — **Figure 1: Ergonomic Benefits.** This diagram shows the difference in posture with and without a monitor riser, highlighting how the stand helps maintain a straight back and reduces neck strain.

Sadržaj paketa

Please verify that all components are present before beginning assembly. Refer to the assembly diagram for visual identification.

Top Shelf Board (x1)
Side Support Boards (x2)
Srednja polica (x1)
Connecting Screws (Type A, x6)
Cam Locks (Type B, x6)
Wooden Dowels (Type C, x4)
Rubber Feet (Type D, x6)
Cable Management Clip (Type E, x1)

Assembly diagram showing all parts and steps for the monitor stand — **Figure 2: Assembly Components.** This image displays all individual parts and hardware included in the package, along with a step-by-step visual guide for assembly.

Uputstva za sastavljanje

Follow these steps to assemble your BONTEC MTR-B2 Monitor Stand Riser. A screwdriver is required (not included).

Step 1: Attach Connecting Screws to Top Shelf. Insert 4 connecting screws (Type A) into the pre-drilled holes on the underside of the top shelf board. Ensure they are securely fastened.
Step 2: Attach Wooden Dowels to Side Supports. Insert 2 wooden dowels (Type C) into the corresponding holes on the inner side of each side support board.
Step 3: Connect Side Supports to Middle Shelf. Align the middle shelf board with the wooden dowels on the side support boards. Secure the middle shelf to the side supports using 2 cam locks (Type B) on each side. Turn the cam locks clockwise until tight.
Step 4: Attach Top Shelf to Assembled Base. Align the top shelf (with connecting screws from Step 1) with the holes on the top edges of the assembled side and middle shelves. Secure the top shelf using the remaining 2 cam locks (Type B) on each side. Turn clockwise until tight.
Step 5: Apply Rubber Feet. Attach the 6 rubber feet (Type D) to the bottom corners and center of the stand to prevent scratching and ensure stability.
Step 6: Install Cable Management Clip. Attach the cable management clip (Type E) to the desired side of the stand for organizing cables.

Note: Do not overtighten screws to avoid damaging the wood.

Detailed step-by-step assembly instructions for the BONTEC monitor stand — **Figure 3: Visual Assembly Guide.** This diagram provides a visual representation of each assembly step, showing component placement and hardware usage.

Uputstvo za upotrebu

Your BONTEC MTR-B2 Monitor Stand Riser is designed for versatile use to enhance your workspace.

Položaj monitora: Place your monitor securely on the top surface of the stand. Ensure the monitor's base fits within the dimensions of the stand.
Keyboard Storage: Utilize the space beneath the middle shelf to store your full-size keyboard when not in use, freeing up desk space.
Skladištenje dodatne opreme: The middle shelf and side compartments are ideal for organizing notebooks, pens, external hard drives, or other small office supplies.
Cellphone Holder: Use the integrated slot on the top surface to hold your cellphone upright. The slot is designed to allow charging cables to pass through for convenience.
Upravljanje kablovima: Route power cords and data lines through the attached cable management clip to keep them tidy and prevent tangles.

Monitor stand in use with a monitor, phone, and speaker on top, and keyboard underneath — **Figure 4: Organized Workspace.** This image demonstrates the monitor stand in a typical setup, showcasing how it elevates the monitor and provides organized storage for various desk items.

Close-up of the monitor stand's phone holder with a phone and charging cable, and rubber feet — **Figure 5: Phone Holder and Stability.** Detaljno view of the integrated cellphone holder, showing a phone being charged, and the non-slip rubber feet at the base of the stand.

Cable management clip on the side of the monitor stand organizing power and data cables — **Slika 6: Upravljanje kablovima.** This image highlights the cable management clip attached to the side of the stand, effectively organizing power and data cables.

Monitor stand with a full-size keyboard stored underneath — **Figure 7: Keyboard Storage.** The image shows a full-size keyboard neatly stored in the lower tier of the monitor stand, demonstrating efficient use of space.

Održavanje

To ensure the longevity and appearance of your monitor stand, follow these simple maintenance guidelines:

čišćenje: Obrišite površinu mekom, damp krpom. Izbjegavajte upotrebu jakih hemikalija ili abrazivnih sredstava za čišćenje, jer mogu oštetiti završnu obradu.
Otprašivanje: Regularly dust the stand to prevent buildup.
Provjera stabilnosti: Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti. Po potrebi ih ponovo zategnite.
Izbjegavajte prekomjernu težinu: Do not exceed the maximum load capacity of 66 pounds (30 kg) to prevent damage or instability.
Zaštitite od vlage: Keep the stand away from excessive moisture or direct sunlight to prevent warping or discoloration of the wood.

Rješavanje problema

If you encounter any issues with your BONTEC MTR-B2 Monitor Stand Riser, refer to the following common solutions:

Problem	Mogući uzrok	Rješenje
Stalak je klimav ili nestabilan.	Screws are loose; uneven surface; missing rubber feet.	Ensure all connecting screws and cam locks are tightened. Place the stand on a flat, stable surface. Verify all rubber feet are attached.
Poteškoće tokom montaže.	Nepravilna orijentacija dijelova; nedostajuća oprema.	Review the assembly instructions and diagrams carefully. Ensure parts are oriented correctly. Check package contents against the list. Do not force parts together.
Monitor does not fit on the stand.	Monitor base is too large for the stand's top surface.	Verify your monitor's base dimensions against the stand's top surface dimensions (21.26 x 10.04 inches).

Specifikacije

Atribut	Detalj
Broj modela	MTR-B2
Brand	BONTEC
Materijal	Konstruisano drvo (MDF)
Boja	Crna
Dimenzije proizvoda (D x Š x V)	21.26 x 10.04 x 5.59 inča (540 x 255 x 142 mm)
Težina artikla	7 funte (3.17 kg)
Kapacitet opterećenja	66 funti (30 kg)
Obavezna montaža	Da
Posebna karakteristika	Lightweight, 2-Tier Storage, Cable Management, Cellphone Holder

Diagram showing the dimensions of the BONTEC monitor stand in millimeters — **Slika 8: Dimenzije proizvoda.** This image provides a detailed diagram of the monitor stand's dimensions, including width, depth, and height, in millimeters.

Video snimci proizvoda

BONTEC 2-Tier Wood Monitor Stand Riser Overview

Video 1: Product Features and Installation Steps. Ovaj video pruža sveobuhvatan pregledview of the BONTEC 2-Tier Wood Monitor Stand Riser, highlighting its key features, dimensions, and a visual guide for assembly. It demonstrates how the stand helps organize your desktop and supports a full-size keyboard.

BONTEC Extra Long 21.3 Inch 2 Tiers Wood Monitor Stand

Video 2: Detailed Product View. This video offers a closer look at the extra-long 21.3-inch BONTEC monitor stand, emphasizing its two-tier design and how it accommodates various desk setups for improved organization and ergonomics.

Garancija i korisnička podrška

BONTEC is committed to providing high-quality products and exceptional customer service. If you encounter any issues with your monitor stand, please do not hesitate to contact our dedicated support team.

Our customer support is available to address any concerns you may have and ensure your experience is satisfactory. Please refer to your purchase documentation or the BONTEC webstranicu za detalje o garanciji i kontakt informacije.

	BONTEC MTR-S3 Vodič za instalaciju stalka za dva monitora Zvanični vodič za instalaciju BONTEC MTR-S3 stalka za dva monitora. Saznajte kako sastaviti svoj ergonomski drveni organizator za radnu površinu s držačem za pametni telefon.
	Upute za montažu Bontec MTR-S3 stalka za dva monitora Detaljan vodič za sastavljanje stalka za dva monitora Bontec MTR-S3, MTR-S3-WH i MTR-S3-ZM. Uključuje popis dijelova i upute za sastavljanje.
	BONTEC Crna Clamp-On Keyboard Tray Instruction Manual Uputstvo za upotrebu za BONTEC Black Clamp-na nosaču tastature (Model KMT01-HD), s detaljnim opisom sadržaja paketa, koraka sastavljanja, specifikacija, dimenzija i nekompatibilnih tipova radnih površina za pravilnu instalaciju i upotrebu.
	Upute za montažu nosača za monitor s plinskom oprugom BONTEC GDM7501 Detaljan vodič za instalaciju nosača monitora s plinskom oprugom BONTEC GDM7501, koji pokriva...amp i postavljanje baze s ušicama, pričvršćivanje VESA ploče, ugradnja kraka, podešavanja i upravljanje kablovima.
	BONTEC FN-411 Vodič za montažu TV kolica Detaljne upute za instalaciju mobilnog TV stalka BONTEC FN-411, uključujući kontrolnu listu komponenti i detaljne upute za montažu televizora od 32 do 85 inča.
	Upute za montažu mobilne radne stanice BONTEC MWS-001BK Detaljne upute za sastavljanje mobilne radne stanice BONTEC MWS-001BK, postolja s podesivom visinom pogodnog za podij, govornicu i upotrebu na laptopu.

BONTEC MTR-B2