Generac RTSW200G3 200 Amp Service Rated 120/208 3Ø Power Transfer Switch Instruction Manual

1. Proizvod je gotovview

The Generac RTSW200G3 is a 200 Amp Service Rated Three-Phase Automatic Transfer Switch designed for use with Generac generators equipped with Evolution or Nexus Controllers. This unit facilitates the automatic transfer of electrical load between utility power and a standby generator, ensuring continuous power supply during outages.

Ključne karakteristike uključuju:

• Durable and Weather-Resistant Enclosure: Features an aluminum NEMA/UL Type 3R enclosure with electrostatically applied powder coating for long-lasting performance in various weather conditions.
• Robust and UL Recognized Contactors: Heavy-duty Generac contactors are recognized by UL for reliability and designed for extended service life.
• Efficient and Intelligent Control: The integrated controller at the generator manages all timing, sensing, exercising functions, and transfer commands for seamless operation.
• Single-Person Installation Design: Engineered to streamline the setup process.

Image showing the Generac RTSW200G3 200 Amp Service Rated 120/208 3Ø Power Transfer Switch, highlighting its robust aluminum enclosure.

2. Sigurnosne informacije

UPOZORENJE: Installation and service of this transfer switch must be performed by a qualified, licensed electrician in accordance with all applicable electrical codes and standards. Failure to do so can result in serious injury, death, or property damage.

• Always disconnect all power sources before servicing the transfer switch.
• Ensure proper grounding and bonding as per local electrical codes.
• Do not operate the transfer switch if any part is damaged or appears to be malfunctioning.
• Ovaj proizvod sadrži hemikalije za koje je država Kalifornija utvrdila da uzrokuju rak i urođene mane ili druge reproduktivne štete (upozorenje iz Prijedloga 65).

3. Postavljanje i instalacija

The Generac RTSW200G3 is designed for a single-person installation, however, Generac strongly recommends that installation be performed by a certified and licensed electrician. This ensures compliance with all electrical codes and safety standards.

• The transfer switch is listed to UL 1008 for Optical Standby applications.
• Service Disconnects are listed to UL 489.
• The enclosure is provided with an integrated deadfront for safe operation of the Service Disconnect.
• Refer to the detailed wiring diagrams and installation instructions provided with the physical product for specific connection procedures.

4. Uputstvo za upotrebu

The Generac RTSW200G3 operates automatically in conjunction with your Generac generator's Evolution or Nexus Controller. The transfer switch monitors the utility power supply.

• Utility Power Loss: Upon detection of a utility power outage, the generator controller will initiate the generator startup sequence. Once the generator reaches proper operating parameters, the transfer switch will automatically transfer the electrical load from the utility to the generator.
• Utility Power Restoration: When utility power is restored and stable, the transfer switch will automatically transfer the electrical load back to the utility. The generator will then enter a cool-down period before shutting down.
• Ručni rad: Consult your generator's controller manual for any manual override or testing procedures.

5. Održavanje

Regular maintenance ensures the longevity and reliable operation of your transfer switch. Always disconnect all power sources before performing any maintenance.

• Godišnja inspekcija: Have a qualified electrician inspect the transfer switch annually. This includes checking for loose connections, signs of corrosion, and proper operation of moving parts.
• Održavajte čistoću: Ensure the enclosure is free from dust, debris, and moisture.
• Testirajte redovno: Follow the recommended testing schedule for your generator and transfer switch system to ensure it functions correctly during an actual power outage.

6. Otkrivanje problema

If you experience issues with your Generac RTSW200G3 transfer switch, consider the following basic troubleshooting steps. For complex issues, contact a qualified electrician or Generac customer support.

• No Transfer: Verify that the generator is running and producing power. Check the generator controller for any fault codes. Ensure all circuit breakers are in the ON position.
• Intermitentni rad: Check all wiring connections for tightness and signs of damage. Ensure the utility power supply is stable.
• Neobični zvukovi: Immediately shut down the system and contact a qualified technician.

7. Specifikacije

8. Garancija i podrška

The Generac RTSW200G3 comes with a petogodišnja ograničena garancija, providing confidence in your power transfer solution.

For technical assistance, warranty claims, or to locate authorized service providers, please contact Generac customer support or visit the official Generac website. Također možete posjetiti Generac trgovina na Amazonu za više informacija o proizvodu.