Dynojet Power Vision PV-2B CAN-Bus korisnički priručnik

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dynojet Power Vision PV-2B CAN-Bus device. The Power Vision is a performance tuning and diagnostic device for vehicles utilizing a CAN-Bus system, designed to optimize engine performance and provide real-time data monitoring.

Please read this manual thoroughly before using the device to ensure proper operation and to prevent damage.

2. Sigurnosne informacije

Uvijek poštujte sljedeće sigurnosne mjere:

• Ensure the vehicle's ignition is off before connecting or disconnecting the Power Vision device.
• Do not attempt to modify the device or its internal components.
• Držite uređaj dalje od ekstremnih temperatura, vlage i direktne sunčeve svjetlosti.
• Only use the provided cables and accessories with the Power Vision.
• Consult a qualified technician if you are unsure about any installation or tuning procedures.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• Dynojet Power Vision Black PV-2B CAN-Bus Device
• Vehicle Connection Cable
• USB kabl (za povezivanje sa računarom)
• Kratki vodič (za više detalja pogledajte ovaj priručnik)

4. Proizvod je gotovview

Figure 4.1: Dynojet Power Vision PV-2B Device

The Dynojet Power Vision PV-2B is a compact, handheld device featuring a color touchscreen display. It includes a multi-pin connector cable for direct interface with your vehicle's diagnostic port. The screen displays various menu options such as "Program Vehicle" for flashing custom tunes, "Datalog" for recording vehicle data, "Vehicle Tools" for diagnostic functions, "Settings" for device configuration, "Device Info" for firmware details, and "Dealer Info". A USB port is also present for connecting to a computer for updates and file transferi.

4.1 Karakteristike uređaja

• Flash tunes to your vehicle's ECU.
• Display real-time vehicle data (sensors, RPM, speed, etc.).
• Čita i briše dijagnostičke kodove grešaka (DTC).
• Izvršite dijagnostičke testove.
• Zabilježite podatke za analizu.
• Kompaktan i izdržljiv dizajn.

5. Podešavanje

5.1 Početno podešavanje uređaja

1. Napunite uređaj: Connect the Power Vision to a computer using the supplied USB cable. Allow the device to charge fully before first use.
2. Instaliraj softver: Download and install the latest WinPV software from the official Dynojet website onto your computer. This software is required for device updates and tune management.
3. Ažurirajte firmver: Once WinPV is installed, connect the Power Vision to your computer. Follow the on-screen prompts in WinPV to update the device firmware to the latest version.

5.2 Priključivanje na vozilo

1. Locate your vehicle's diagnostic port (typically a 4-pin or 6-pin connector for motorcycles, or an OBD-II port for other vehicles). Refer to your vehicle's service manual for exact location.
2. Provjerite da li je paljenje vozila u položaju ISKLJUČENO.
3. Connect the Power Vision vehicle cable to the diagnostic port. Ensure a secure connection.
4. Connect the other end of the vehicle cable to the Power Vision device.
5. Turn the vehicle's ignition to the ON position (do not start the engine unless instructed by a specific procedure). The Power Vision device should power on automatically.

6. Uputstvo za upotrebu

6.1 Navigacija kroz meni

The Power Vision features a touchscreen interface. Tap on the desired icon to select a function.

• Programsko vozilo: Used to flash custom tunes or restore stock tunes to your vehicle's ECU.
• Datalog: Initiates data logging sessions to record various vehicle parameters.
• Alati za vozila: Access diagnostic functions such as reading/clearing DTCs, performing system tests, and viewprikupljanje podataka uživo.
• Postavke: Configure device preferences, display options, and unit measurements.
• Informacije o uređaju: Displays device serial number, firmware version, and other internal information.
• Podaci o trgovcu: Provides contact information for your Dynojet dealer (if configured).

6.2 Flashing a Tune

1. Ensure the device is connected to the vehicle and the ignition is ON.
2. Iz glavnog menija izaberite "Programsko vozilo".
3. Follow the on-screen prompts to select the desired tune file.
4. Confirm the tune selection and initiate the flashing process. IMPORTANT: Do not interrupt the flashing process. Ensure the vehicle battery is fully charged.
5. Once complete, the device will indicate success. Turn the ignition OFF, then ON again to reset the ECU.

6.3 Zapisivanje podataka

1. Iz glavnog menija izaberite "Datalog".
2. Choose the parameters you wish to log.
3. Start the logging session. The device will record data until stopped.
4. To retrieve logged data, connect the Power Vision to your computer and use the WinPV software.

7. Održavanje

• čišćenje: Use a soft, dry cloth to clean the device screen and casing. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: Store the Power Vision in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Ažuriranja firmvera: Regularly check the Dynojet website for firmware updates to ensure optimal performance and compatibility with new vehicle models.
• Inspekcija kablova: Periodically inspect the connection cables for any signs of wear or damage. Replace if necessary.

8. Otkrivanje problema

9. Specifikacije

10. Podrška

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Dynojet Research directly.

• Webstranica: www.dynojet.com
• Refer to the official Dynojet webstranicu za najnovije kontakt informacije i resurse podrške.