Sealey SMS255 Double Sliding Compound Mitre Saw 250mm

1. Uvod i pregled proizvodaview

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your Sealey SMS255 Double Sliding Compound Mitre Saw 250mm. Please read this manual thoroughly before initial use and retain it for future reference.

The Sealey SMS255 is a powerful 1800W compound mitre saw designed for precise cutting of wood and other specified materials. It features double slides for enhanced control, a 60-tooth TCT blade, and integrated work piece supports. For improved accuracy, the unit is equipped with an LED work light and a laser guide.

Slika 1.1: Gotovoview of the Sealey SMS255 Double Sliding Compound Mitre Saw.

This image displays the complete Sealey SMS255 Double Sliding Compound Mitre Saw from a front-left perspective, showcasing its main components including the motor housing, blade guard, cutting table, and sliding rails.

2. Sigurnosne informacije

Uvijek dajte prioritet sigurnosti prilikom rada s električnim alatima. Nepoštivanje ovih uputa može dovesti do ozbiljnih povreda ili oštećenja alata.

• Pročitajte priručnik: Prije upotrebe, upoznajte se sa svim uputama i upozorenjima.
• Lična zaštitna oprema (PPE): Uvijek nosite zaštitne naočale, zaštitu za sluh i masku za prašinu.
• Radna oblast: Radno područje održavajte čistim, dobro osvijetljenim i bez prepreka. Osigurajte odgovarajuću ventilaciju.
• električna sigurnost: Ensure the power supply matches the tool's requirements (230V). Do not operate in damp ili vlažnim uslovima.
• Sigurnost oštrice: Ensure the blade is correctly installed and sharp. Never attempt to remove jammed material while the saw is running.
• Osigurajte radni komad: Uvijek clamp the workpiece firmly before cutting to prevent movement.
• Održavanje kontrole: Keep hands clear of the blade path. Use both hands to operate the saw when possible.
• Isključite iz struje kada se ne koristi: Isključite pilu iz napajanja prije podešavanja, zamjene oštrica ili održavanja.

3. Komponente i montaža

The Sealey SMS255 comes with essential components for immediate use and convenience.

Uključene komponente:

• Radni komad Clamp
• Dust Extraction Bag
• Drška za nošenje
• 60-tooth TCT Blade (pre-installed)

Početno podešavanje:

1. Raspakivanje: Carefully remove the saw and all components from the packaging. Inspect for any shipping damage.
2. Pozicioniranje: Place the saw on a stable, level workbench or stand. Ensure sufficient space for workpiece movement and safe operation.
3. Attach Workpiece Clamp: Osigurajte radni predmet clamp to the saw table as shown in Figure 3.1. This clamp is crucial for holding material securely during cuts.
4. Ugradnja vrećice za prašinu: Connect the dust extraction bag to the dust port. For optimal dust collection, consider connecting to an external dust extraction system.
5. Priključak za napajanje: Priključite pilu na odgovarajuću utičnicu od 230 V.

Figure 3.1: Workpiece clamp u upotrebi.

This image shows a close-up of the workpiece clamp holding a piece of wood firmly against the saw's fence, demonstrating its function in securing material for accurate and safe cutting.

4. Uputstvo za upotrebu

Follow these steps for safe and effective operation of your mitre saw.

1. Priprema materijala: Ensure the workpiece is free of nails, screws, or other foreign objects that could damage the blade.
2. Adjusting Mitre Angle: Loosen the mitre lock handle and pivot the turntable to the desired angle. The saw features locking increments at 0°, 15°, 22.5°, 30°, and 45° Left & Right. Securely tighten the handle.
3. Podešavanje ugla nagiba: For bevel cuts, adjust the saw head tilt to the desired angle (up to 45°). Lock the bevel adjustment securely.
4. Positioning Workpiece: Čvrsto postavite radni komad uz ogradu i pričvrstite ga pomoću stezaljke za radni komad.amp. Ensure the cutting line aligns with the laser guide.
5. Aktiviranje lasera i LED diode: The integrated laser guide and LED work light can be activated to assist with precise alignment and illumination of the cutting area.
6. Pravljenje reza:
   • Hold the saw handle firmly.
   • Pritisnite okidač da biste pokrenuli motor i omogućili da se oštrica pokrene punom brzinom.
   • Slowly lower the saw head through the workpiece, applying steady, even pressure.
   • For wider materials, utilize the double sliding feature by pulling the saw head forward, lowering the blade, and pushing it back through the material. The slides can be locked at different lengths for greater control.
   • Nakon što je rez završen, otpustite okidač i pričekajte da se list pile potpuno zaustavi prije nego što podignete glavu pile.

Figure 4.1: Saw in operation, cutting wood.

This image captures the Sealey SMS255 mitre saw in action, with the blade descending through a wooden workpiece, illustrating the cutting process.

5. Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vaše pile.

• Isključite napajanje: Always unplug the saw before performing any maintenance or cleaning.
• čišćenje: After each use, clean dust and debris from the saw, especially around the blade guard, motor vents, and sliding rails. Use a brush or compressed air.
• Usisavanje prašine: Regularly empty the dust extraction bag. If using an external system, ensure its filters are clean and connections are secure.
• Inspekcija oštrice: Periodically inspect the blade for sharpness, damage, or missing teeth. A dull blade can cause kickback and poor cut quality.
• Zamjena oštrice: When replacing the blade, ensure the new blade is compatible (250 x 3.2 x Ø30mm) and installed with the correct rotation direction. Model No. SMS255B multipurpose blade is available for mild steel, aluminium, and wood with nails.
• podmazivanje: Keep the sliding rails clean and lightly lubricated to ensure smooth operation.

Figure 5.1: Dust extraction port.

Ova slika pruža krupni plan view of the dust extraction port on the Sealey SMS255, highlighting the connection point for the dust bag or an external dust collection system.

6. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti pri korištenju ugaone pile.

7. Specifikacije

Detailed technical specifications for the Sealey SMS255 Double Sliding Compound Mitre Saw.

8. Garancija i podrška

Your Sealey SMS255 Double Sliding Compound Mitre Saw is covered by a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact Sealey customer service or your authorized Sealey dealer. Ensure you have your model number (SMS255) and purchase details available when contacting support.

For more information, visit the official Sealey webstranica: www.sealey.co.uk