AIBOO YK-300000160

AIBOO RGB Color Changing LED Under Cabinet Lights Kit

Model: YK-300000160

Uvod

This instruction manual provides detailed information on the installation, operation, and maintenance of your AIBOO RGB Color Changing LED Under Cabinet Lights Kit. Designed for versatile indoor lighting, these puck lights offer vibrant color options and dimmable functionality to enhance various spaces such as kitchens, wardrobes, and furniture.

Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene komponente:

Components of the AIBOO LED Under Cabinet Lights Kit
Image: All components included in the AIBOO RGB LED Under Cabinet Lights Kit, laid out on a white surface. This includes six puck lights, an adapter, an 8-way splitter, an RF remote control, extension cables, an on/off switch, adhesive tapes, and screws.

Postavljanje i instalacija

Follow these steps to properly set up and install your AIBOO LED Under Cabinet Lights:

  1. Izgled plana: Determine the desired placement for each puck light under your cabinet or furniture. Consider the length of the cables and the location of the power outlet.
  2. Connect Puck Lights to Splitter: Connect the cables from each RGB puck light to the 8-way splitter. Ensure a secure connection for each light.
  3. Connect Splitter to Controller: Connect the splitter to the LED controller. Pay attention to the arrow indicators on the connectors to ensure correct polarity.
  4. Connect Controller to Adapter: Connect the LED controller to the DC12V power adapter.
  5. Connect Adapter to Power: Plug the power adapter into a standard AC120V wall outlet.
  6. Montažna svjetla: Use the provided adhesive tapes or screws to securely mount the puck lights in your desired locations. The aluminum housing provides good heat dissipation.
Dimensions of AIBOO LED Puck Lights and components
Image: Detailed dimensions of the puck lights (2.4 inches diameter, 0.3 inches thick), 8-way splitter (3x1.4x0.66 inches), controller (11.8 inches), on/off switch (19.7 inches), and power adapter (60 inches cable length). This helps in planning installation.

Video vodič za instalaciju

For a visual guide on the connection sequence, please refer to the video below:

Video: This video demonstrates the step-by-step connection process for the AIBOO RGB LED Under Cabinet Lights, showing how to link the puck lights to the splitter, controller, and power adapter.

Uputstvo za upotrebu

Your AIBOO LED Under Cabinet Lights are controlled by an RF wireless remote. This remote allows for various lighting effects and adjustments.

Funkcije daljinskog upravljača:

AIBOO RF Wireless Remote Control layout and functions
Image: The RF wireless remote control showing its buttons and their functions. It features power on/off, speed adjustment (10 levels), dynamic modes (22 types), static color selection (20 colors), and brightness adjustment (5 levels).
AIBOO LED Puck Lights displaying various colors
Image: A single puck light shown changing through various RGB colors, demonstrating the color-changing capability of the lights.

Održavanje

To ensure the longevity and optimal performance of your AIBOO LED Under Cabinet Lights, follow these simple maintenance guidelines:

Rješavanje problema

If you encounter any issues with your AIBOO LED Under Cabinet Lights, refer to the following common problems and solutions:

ProblemMogući uzrokRješenje
Svjetla se ne pale.
  • Adapter za napajanje nije priključen.
  • Labave veze.
  • Remote control battery low or dead.
  • Neispravnost kontrolera.
  • Uverite se da je adapter za napajanje bezbedno priključen u ispravnu utičnicu.
  • Check all cable connections (puck lights to splitter, splitter to controller, controller to adapter) for tightness.
  • Zamijenite CR2 bateriju u daljinskom upravljaču.
  • Contact customer support if the controller is suspected to be faulty.
Lights flicker or change colors erratically.
  • Labave veze.
  • Interferencija od drugih RF uređaja.
  • Problem kontrolora.
  • Provjerite sve kablovske veze.
  • Move the lights or controller away from other electronic devices that might cause interference.
  • Try resetting the controller (refer to remote pairing instructions if available, or power cycle).
Daljinski upravljač ne reaguje.
  • Baterija je prazna ili mrtva.
  • Daljinski upravljač nije uparen s kontrolerom.
  • Zamijenite CR2 bateriju.
  • To pair: Press SPEED+ and SPEED- at the same time until the lights flicker. This indicates successful pairing.
"White" color appears tinted.
  • Inherent design of RGB LEDs.
  • The white color is a mix of red, blue, and green light, not a pure white. This is normal for RGB lights. If pure white is desired, consider an RGBW set.

Specifikacije

FeatureDetalj
BrandAIBOO
Broj modelaYK-300000160
Vrsta izvora svjetlostiLED
Light ColorRGB (Color Changing)
Broj svjetala6 Pak svjetla
MaterijalAluminijum
Izvor napajanjaCorded Electric
Voltage12 Volts
Wattage12 Watts
Luminous Flux1200 lumena
Posebna karakteristikaDimmable
Tip kontroleraRF bežični daljinski upravljač
Unutrašnja/vanjska upotrebaIndoor
Težina artikla1.1 funti
Dimenzije proizvoda (D x Š x V)7.87 x 5.91 x 2.76 inča
Vrsta montaže2-sided tape / Screws
Vrsta baterije za daljinsko upravljanjePotrebna 1 CR2 baterija (nije uključena)

Garancija i podrška

For warranty information or technical support, please contact AIBOO Lighting directly. You can find more information and contact details on their Amazon store page:

AIBOO Lighting Amazon Store

Additionally, protection plans are available for purchase to extend coverage for your product:

Povezani dokumenti - YK-300000160

Preview AIBOO LED komplet svjetlosne trake: Vodič za instalaciju i specifikacije
Detaljan priručnik za instalaciju i upotrebu za AIBOO LED svjetlosne trake. Obuhvata profesionalce u proizvodnji.file, packing lists, specifications, step-by-step installation procedures for 3, 4, 6, and 8 bar light configurations, two mounting methods, cord management, dimmer usage, and a comprehensive fault analysis and solutions guide. Includes component details and dimensions.
Preview AIBOO 18-tipkasti RGB daljinski upravljač i LED kontroler - uputstvo za upotrebu
Sveobuhvatno korisničko uputstvo za AIBOO bežični RF daljinski upravljač sa 18 tipki RGB (Model B-RF-1702) i pripadajući LED kontroler, koje obuhvata specifikacije, podešavanje, rad i upute za uparivanje.
Preview Priručnik za upotrebu pulsnog oksimetra prsta
Korisnički priručnik za Yonker Fingertip pulsni oksimetar, koji sadrži upute za upotrebu, sigurnosne mjere opreza, tehničke specifikacije i rješavanje problema za modele od YK-80A do YK-84C i YK-81CEU. Uključuje informacije na engleskom, francuskom, njemačkom, italijanskom i španskom jeziku.
Preview Dr Check Finger pulsni oksimetar - uputstvo za upotrebu i specifikacije
Detaljan korisnički priručnik za pulsni oksimetar za prst Dr Check, koji obuhvata rukovanje, tehničke specifikacije, rješavanje problema, sigurnosne mjere i informacije o garanciji.
Preview Yonker Fingertip Puls Oximeter Uputstvo za upotrebu - Model YK-80A do YK-84C
Sveobuhvatno korisničko uputstvo za Yonker Fingertip pulsni oksimetar (modeli YK-80A do YK-84C), u kojem se detaljno opisuju njegove karakteristike, rad, principi mjerenja, mjere opreza, održavanje, tehničke specifikacije i rješavanje problema.