Tascam US-32 MiniStudio USB Podcasting Broadcast Audio Interface User Manual

Uvod

The TASCAM MiNiSTUDIO Personal US-32 is a desktop online broadcast studio designed for podcasters, gamers, and online broadcasters. It features a professional-quality audio interface and real-time effects to enhance your audio productions.

This manual provides instructions for setting up, operating, and maintaining your US-32 MiniStudio, along with troubleshooting tips and product specifications.

Slika 1: The Tascam US-32 MiniStudio USB Podcasting Broadcast Audio Interface. This image provides a general overview uređaja.

Setup

Sadržaj paketa

Provjerite da li su sve komponente prisutne:

• Tascam US-32 MiniStudio Unit
• USB kabel
• Korisnički priručnik (ovaj dokument)

Povezivanje uređaja

The US-32 MiniStudio connects to your computer via a USB 2.0 cable. It can be powered by the USB bus or an optional 5V DC adapter for tablet use.

1. Connect the USB cable from the US-32 MiniStudio to an available USB port on your computer.
2. If using with a tablet or requiring external power, connect a 5V DC power adapter (not included) to the "DC IN 5V" port.
3. Ensure the POWER switch on the rear panel is in the "ON" position.

Slika 2: Rear panel connections of the Tascam US-32 MiniStudio. This image displays the power switch, USB 2.0 port for computer connection, and the DC IN 5V port for external power, typically used with tablets.

Instalacija softvera

Before using the US-32 MiniStudio, install the necessary drivers and control software from the official Tascam website. The device supports ASIO/WDM for Windows and Core Audio for Mac.

1. Visit the official Tascam support website.
2. Locate the drivers and control software for the US-32 MiniStudio.
3. Download and run the installer, following the on-screen instructions.
4. Ponovo pokrenite računar ako se to od vas zatraži.

Uputstvo za upotrebu

Microphone Input Options

The US-32 MiniStudio offers versatile microphone input options:

• XLR/TRS Input Jack: For professional microphones, with switchable +48V phantom power for condenser microphones.
• Built-in Condenser Mic: For convenient, immediate use without external microphones.
• 4-pole Mini-jack: For connecting earphone/microphone headsets.

Ensure appropriate input gain is set using the dedicated knob to achieve optimal audio levels without distortion.

PON Sound Effect Buttons

The three assignable PON buttons allow for instant playback of sound effects. The unit comes with pre-loaded effects like bell, buzzer, and applause. You can also customize these buttons with your own .wav or .mp3 audio files using the control software.

1. Open the US-32 MiniStudio control software on your computer.
2. Navigate to the PON button assignment section.
3. Double-click on a button in the software interface to select an audio file (.wav or .mp3) from your computer.
4. Once assigned, press the physical PON button on the unit to trigger the sound effect during your broadcast.

Real-time Voice Effects

The US-32 MiniStudio includes real-time voice effects accessible via the control software. These effects can modify your voice with pitch shifts, echo, shortwave radio effects, and studio-quality reverb.

• Access voice effects through the control software.
• Adjust parameters such as pitch, echo depth, and reverb type.
• The "ducking" effect can automatically lower background music when you speak.

Slika 3: Front panel of the Tascam US-32 MiniStudio. This image highlights the various control knobs for input levels, the three assignable PON sound effect buttons, and the prominent ON AIR button for broadcast control.

"ON AIR" Function

The "ON AIR" button integrates your voice and effects with other audio sources from your computer, such as music or video playback. Pressing this button activates the broadcast mix.

• Ensure all audio sources (microphone, computer audio, effects) are properly configured in the control software.
• Press the "ON AIR" button to begin broadcasting your mixed audio.

Monitoring Audio

The US-32 MiniStudio provides two headphone outputs for monitoring: a 1/4" output and a 1/8" output (marked "headset"). Both outputs share a single volume control.

Slika 4: Tascam US-32 MiniStudio in a typical usage scenario. The device is connected to a laptop, and headphones are plugged in, demonstrating its application in a broadcasting or podcasting setup.

Održavanje

To ensure the longevity and optimal performance of your Tascam US-32 MiniStudio, follow these maintenance guidelines:

• čišćenje: Za čišćenje vanjske strane uređaja koristite meku, suhu krpu. Izbjegavajte abrazivna sredstva za čišćenje, rastvarače ili voskove.
• Skladištenje: Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti, ekstremnih temperatura i visoke vlažnosti.
• Rukovanje: Pažljivo rukujte uređajem. Izbjegavajte ispuštanje ili izlaganje jakim udarcima.
• ventilacija: Osigurajte odgovarajuću ventilaciju oko uređaja kako biste spriječili pregrijavanje. Ne blokirajte ventilacijske otvore.
• Iskljuciti: Always power off the unit and disconnect it from the power source when not in use for extended periods or during electrical storms.

Rješavanje problema

If you encounter issues with your US-32 MiniStudio, refer to the following common problems and solutions:

No Sound or Low Audio Output

• Provjerite veze: Ensure all cables (USB, microphone, headphones) are securely connected.
• Nivoi glasnoće: Verify that the input gain knobs on the US-32 and the master volume control are turned up. Check software volume settings on your computer.
• Fantomska snaga: If using a condenser microphone, ensure +48V phantom power is enabled for the XLR input.
• Vrsta mikrofona: Some high-end dynamic microphones may require an external preamp for optimal gain, as the built-in preamps might not provide sufficient amplification for all models.
• Postavke softvera: Confirm that the US-32 MiniStudio is selected as the default audio input/output device in your computer's sound settings and your broadcasting software.

Background Noise or Hum

• petlja uzemljenja: Try connecting the computer and US-32 to the same power outlet or using a ground loop isolator.
• Kvalitet kabla: Use high-quality, shielded cables for microphones and other connections.
• Dobijte Staging: Ensure input gain is set appropriately. Too high gain can ampumanjiti buku.
• Okruženje: Minimize electrical interference from other devices (e.g., fluorescent lights, power adapters).

PON Buttons or Effects Not Working

• Softver koji radi: The PON buttons and voice effects require the Tascam control software to be running in the background.
• Zadaci: Verify that sound files are correctly assigned to the PON buttons within the software.
• Default Audio Device: Ensure the US-32 is set as the default audio device, as some effects may route through it.

Device Not Recognized by Computer

• USB veza: Pokušajte s drugim USB priključkom ili USB kabelom.
• Vozači: Reinstall the latest drivers from the Tascam website.
• Snaga: Ensure the unit is powered on. If using external power, verify the adapter is working.
• Ponovno pokretanje: Restart your computer and the US-32 MiniStudio.

Specifikacije

Note: While specifications mention "6 AA batteries required," the primary power source for the US-32 is typically USB bus power or an optional 5V DC adapter. Please refer to the official Tascam documentation for definitive power requirements.

Garancija i podrška

For warranty information, technical support, or service inquiries, please contact Tascam customer support directly or visit their official webSačuvajte dokaz o kupovini za slučaj reklamacije.

Tascam Official Webstranica: https://tascam.com/us/