Utilitech Pro 24-inch 2-Speed High Velocity Fan User Manual

Važne informacije o sigurnosti

Please read and understand all instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.

• Uvijek isključite ventilator iz električne utičnice prije čišćenja, servisiranja ili premještanja.
• Nemojte koristiti ventilator sa oštećenim kablom ili utikačem. Odbacite ventilator ili ga vratite u ovlašteni servis na pregled i/ili popravku.
• Ne postavljajte kabel ispod tepiha. Ne prekrivajte kabel prostirkama, stazama ili sličnim pokrivačima. Postavite kabel dalje od prometne površine gdje se nitko neće spotaknuti o njega.
• Ne ubacujte prste ili strane predmete u bilo koji ventilacijski ili ispušni otvor jer to može uzrokovati strujni udar ili požar ili oštetiti ventilator.
• Do not use outdoors or on wet surfaces. This fan is designed for indoor use only.
• Postavite ventilator na stabilnu, ravnu površinu kako biste spriječili njegovo prevrtanje.
• Držite djecu i kućne ljubimce dalje od ventilatora tokom rada.

Sadržaj paketa

Carefully unpack your fan and ensure all items are present and in good condition. If any items are missing or damaged, contact customer support.

• Utilitech Pro 24-inch High Velocity Fan Unit
• Sturdy Floor Stand with Wheels
• Pribor za montažu (vijci, matice, podloške)
• Korisnički priručnik (ovaj dokument)

Setup

Uputstva za sastavljanje

Follow these steps to assemble your Utilitech Pro High Velocity Fan:

1. Carefully remove all packaging materials from the fan unit and the stand components.
2. Attach the fan head to the U-shaped floor stand using the provided bolts, nuts, and washers. Ensure the fan head is securely fastened and can pivot smoothly within the stand.
3. Attach the wheels to the designated points on the base of the floor stand. These wheels allow for easy portability of the fan.
4. Prije uključivanja ventilatora provjerite jesu li svi priključci čvrsti i sigurni.

An image of the fully assembled Utilitech Pro 24-inch 2-Speed High Velocity Fan, showcasing its black metal frame, large circular fan head with a protective grille, and a sturdy base with wheels for portability.

Uputstvo za upotrebu

Kontrole

The fan features a simple control knob located on the rear of the fan motor housing. This knob allows you to select between two speed settings.

Operacija

1. Postavite ventilator na čvrstu, ravnu površinu.
2. Uključite kabl za napajanje u standardnu ​​električnu utičnicu od 120V AC.
3. Turn the control knob on the back of the fan to select your desired speed setting: '1' for low speed or '2' for high speed.
4. To turn off the fan, turn the control knob to the 'OFF' position.
5. Adjust the angle of the fan head by tilting it up or down to direct airflow as needed.

Održavanje

Čišćenje

Redovno čišćenje će pomoći u održavanju performansi ventilatora i produžiti njegov vijek trajanja.

• Uvijek isključite ventilator prije čišćenja.
• Koristite meku, damp krpu za brisanje vanjskih površina ventilatora. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• To clean the fan blades, carefully remove the front grille (refer to assembly instructions for reverse steps if necessary). Wipe the blades with a soft cloth. Ensure the blades are dry before reattaching the grille.
• Ne uranjajte ventilator u vodu i nemojte dozvoliti da voda kapne u kućište motora.

Skladištenje

When not in use, store the fan in a cool, dry place, away from direct sunlight and moisture. It is recommended to cover the fan to protect it from dust.

Rješavanje problema

If you experience issues with your fan, refer to the table below for common problems and solutions.

Specifikacije

Garancija i podrška

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Utilitech webSačuvajte račun kao dokaz o kupovini u slučaju bilo kakvih reklamacija.