INSIZE 1156-300 Elektronski visinomjer Uputstvo za upotrebu

1. Uvod i krajview

The INSIZE 1156-300 is an electronic height gage designed for precise vertical measurements. It features a driving wheel for smooth movement and a digital display for clear readings. This instrument is capable of measuring in both inches (0-12") and millimeters (0-300mm) with high resolution. It is constructed from stainless steel for durability and includes a carbide-tipped scriber for marking.

Figure 1: The INSIZE 1156-300 Electronic Height Gage, showing its digital display, driving wheel, and carbide-tipped scriber.

2. Značajke proizvoda

• rezolucija: 0.0005" / 0.01mm for precise measurements.
• Automatsko isključivanje: Conserves battery life; unit powers on by moving the digital unit.
• Izgradnja: Made of durable stainless steel.
• Kontrolna dugmad: Includes ON/OFF, ZERO, INCH/MM, PRE-SET (+, -), and HOLD functions.
• Scriber: Equipped with a carbide-tipped scriber for accurate marking.
• Izvor napajanja: Koristi CR2032 bateriju.
• Izlaz podataka: Features data output capability.
• Dodatna oprema: Compatible with data output cables (part no. 7302-SPC5A, 7305-SPC2A), dial test indicator holder (part no. 6293-7), and clamp for protractors (part no. 2372-CLAMP).

3. Šta se nalazi u kutiji

Prilikom raspakivanja, provjerite da li su svi predmeti prisutni i neoštećeni:

• INSIZE 1156-300 Electronic Height Gage
• Carbide-tipped Scriber
• Dust Cover
• CR2032 Battery (may be pre-installed or separate)

4. Podešavanje

1. Raspakivanje: Carefully remove the height gage and all accessories from its packaging. Retain packaging for future storage or transport.
2. Instalacija baterije: If the battery is not pre-installed, open the battery compartment (typically on the back of the digital unit) and insert one CR2032 battery with the positive (+) side facing up. Close the compartment securely.
3. Scriber Attachment: Loosen the scriber clamp screw on the digital unit. Insert the carbide-tipped scriber into the clamp, ensuring it is securely seated and aligned. Tighten the clamp čvrsto zavrnuti.
4. plasman: Place the height gage on a stable, flat, and clean surface, such as a surface plate, to ensure accurate measurements.
5. Poklopac za prašinu: Keep the dust cover on the height gage when not in use to protect it from dust and debris.

5. Uputstvo za upotrebu

Follow these steps for accurate measurement using your INSIZE 1156-300 Electronic Height Gage:

1. Uključeno: Pritisnite ON/OFF button or simply move the digital unit along the column to activate the display.
2. Unit Selection (Inch/mm): Pritisnite INCH/MM button to switch between imperial (inches) and metric (millimeters) units. The selected unit will be indicated on the display.
3. Postavka nule:
   • Place the height gage on the reference surface.
   • Lower the scriber until its tip gently touches the reference surface.
   • Pritisnite NULA button to set the current position as zero. The display will show "0.0000" or "0.00".
4. Mjerenje:
   • Use the driving wheel to smoothly move the digital unit and scriber to the desired measurement point.
   • Ensure the scriber makes firm, consistent contact with the workpiece.
   • Očitajte mjerenje direktno s digitalnog displeja.
5. Pre-set Function:
   • The PRE-SET (+, -) buttons allow you to input a specific value to the display. This is useful for setting a known reference point other than zero.
   • Consult the full product manual for detailed instructions on using the pre-set function for specific applications.
6. Funkcija zadržavanja: Pritisnite HOLD button to freeze the current reading on the display. Press it again to release and resume live measurement.
7. Iskljuciti: Pritisnite i držite ON/OFF button for a few seconds, or the unit will automatically power off after a period of inactivity.

6. Održavanje

• čišćenje: Regularly clean the height gage, especially the measuring surfaces and the digital unit, with a soft, lint-free cloth. For stubborn dirt, a mild, non-abrasive cleaning solution can be used, applied sparingly to the cloth, not directly to the instrument.
• Skladištenje: Store the height gage in its original packaging or a protective case when not in use. Ensure it is kept in a dry environment, away from direct sunlight, extreme temperatures, and corrosive substances. Always use the provided dust cover.
• Zamjena baterije: When the display becomes dim or erratic, replace the CR2032 battery. Ensure proper polarity during installation. Dispose of old batteries responsibly.
• Scriber Condition: Periodically inspect the carbide-tipped scriber for wear or damage. A worn scriber can affect measurement accuracy. Replace if necessary.
• kalibracija: For critical applications, periodic calibration by a qualified technician is recommended to ensure continued accuracy.

7. Otkrivanje problema

If you encounter issues with your INSIZE 1156-300 Height Gage, refer to the following common problems and solutions:

• Ekran je prazan ili taman:
  • Check if the unit is powered on by pressing the ON/OFF button or moving the digital unit.
  • Zamijenite bateriju CR2032. Provjerite da li je umetnuta s ispravnim polaritetom.
• Netačna ili nedosljedna očitanja:
  • Ensure the reference surface is clean, flat, and stable.
  • Re-zero the instrument on the reference surface.
  • Check if the scriber is securely attached and not worn.
  • Clean the measuring surfaces and the digital unit to remove any debris.
  • Ensure the workpiece is stable and properly positioned.
• Digital unit movement is stiff or rough:
  • Clean the column and the sliding surfaces of the digital unit.
  • Apply a very small amount of light machine oil to the column if recommended by the manufacturer (refer to specific product documentation if available).

If the problem persists, contact INSIZE customer support or your local distributor for assistance.

8. Specifikacije

9. Garancija i podrška

For information regarding warranty coverage, technical support, or replacement parts for your INSIZE 1156-300 Electronic Height Gage, please refer to the warranty card included with your product or visit the official INSIZE website. You may also contact your authorized INSIZE dealer or distributor for assistance.

INSIZE Official Webstranica: www.insize.com