Rice Lake 720i-A2 Programabilni indikator - uputstvo za upotrebu

1. Uvod

This user manual provides detailed instructions for the installation, operation, and maintenance of the Rice Lake 720i-A2 Programmable Indicator. The 720i-A2 is a versatile weight indicator and controller designed for industrial applications, capable of automating systems, managing inventory, and capturing precise weight data. Please read this manual thoroughly before operating the device to ensure safe and efficient use.

2. Proizvod je gotovview i karakteristike

The Rice Lake 720i-A2 is a robust programmable indicator built for demanding industrial environments. It features a comprehensive operator keypad and an LCD display for clear data presentation and user interaction.

Figure 1: Rice Lake 720i-A2 Programmable Indicator
This image displays the front panel of the Rice Lake 720i-A2 indicator. The large LCD screen shows '720i' prominently, along with 'ENTER TRUCK ID-1234' and 'ACCEPT-1234'. Below the screen is a keypad with numerical buttons (0-9), function keys (F1-F4), and dedicated buttons for 'ZERO', 'TARA', 'MENU', 'UNID.' (Units), 'IMP/L' (Print/Label), and 'BAL' (Balance). The unit is housed in a stainless steel enclosure, indicating its durability for industrial use. Connection points are visible at the bottom of the unit.

Ključne karakteristike:

• NEMA Type 4X/IP66 rated stainless steel enclosure for harsh environments.
• 5.3 inch x 1.5 inch LCD Display for clear readability.
• Two full duplex serial ports for enhanced connectivity.
• Eight channels on the CPU board for versatile system integration.
• 22-key membrane panel with tactile feedback for reliable operation.
• Programmable soft keys and operator prompts for customized control.
• Supports configurable batch engine or ProAction software for programming.
• Local remote capability allows multiple indicators to display the same data.

3. Sigurnosne informacije

Always observe the following safety precautions to prevent injury and ensure proper operation of the 720i-A2 indicator:

• Uvjerite se da napajanje odgovara navedenoj zapreminitage (115V-AC).
• Do not open the enclosure unless instructed by qualified personnel.
• Isključite napajanje prije izvođenja bilo kakvih postupaka održavanja ili instalacije.
• Avoid exposing the unit to extreme temperatures or corrosive substances beyond its NEMA 4X/IP66 rating.
• Only use approved accessories and replacement parts.

4. Postavljanje i instalacija

4.1 Raspakivanje

Carefully remove the indicator from its packaging. Inspect for any signs of damage during transit. Retain all packaging materials for future transport or storage.

4.2 Montaža

The 720i-A2 can be mounted in universal or panel-mount configurations. Ensure the mounting surface is stable and capable of supporting the unit's weight (approximately 9.5 lbs). Refer to the detailed mounting instructions provided in the separate installation guide for specific dimensions and procedures.

4.3 Električne veze

Connect the indicator to a 115V-AC power source. Ensure all connections are secure and comply with local electrical codes. The unit features two full duplex serial ports for connecting to peripheral equipment such as printers, computers, or other indicators. Consult the wiring diagrams in the full technical manual for detailed connection instructions for load cells and other devices.

5. Uputstvo za upotrebu

5.1 Uključivanje/isključivanje napajanja

To power on the unit, connect it to the 115V-AC power supply. The LCD will illuminate, and the system will perform a self-test. To power off, disconnect the power supply.

5.2 Basic Weighing Operations

• nuliranje: Pritisnite NULA button to set the display to zero when the scale is empty.
• Taring: Place an empty container on the scale and press the TARA button. The display will show zero, allowing you to weigh the net contents.
• Odabir jedinice: Koristite UNID. button to cycle through available weight units (e.g., pounds, kilograms).

5.3 Napredne funkcije

The 720i-A2 supports advanced functions such as batch formulation, inventory management, and data collection. These functions are accessed and configured via the MENU button and programmable soft keys (F1-F4). Detailed programming and operational procedures for these advanced features are covered in the comprehensive programming manual and ProAction software documentation.

• Batching: Configure batch recipes and control material flow using the configurable batch engine.
• Upravljanje podacima: Capture and store weight data, truck IDs, and other relevant information.
• umrežavanje: Utilize the serial ports for integration into larger control systems or for local remote display capabilities.

6. Održavanje

6.1 Čišćenje

Clean the exterior of the indicator with a soft, damp cloth. For stubborn dirt, use a mild, non-abrasive detergent. Do not use harsh chemicals or abrasive materials, as they may damage the stainless steel enclosure or the display.

6.2 Kalibracija

Periodic calibration may be required to maintain accuracy. Calibration procedures should only be performed by qualified service technicians. Refer to the service manual for detailed calibration instructions.

7. Otkrivanje problema

This section provides solutions to common issues. For problems not listed here, contact Rice Lake technical support.

8. Specifikacije

9. Garancija i podrška

The Rice Lake 720i-A2 Programmable Indicator is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Rice Lake website.

For technical support, service, or to order replacement parts, please contact Rice Lake customer service or an authorized Rice Lake dealer. Contact information can typically be found on the manufacturer's webweb-mjestu ili u dokumentaciji vašeg proizvoda.