Nilfisk Alto Aero 26 HEPA Wet/Dry Vacuum User Manual

Uvod

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Nilfisk Alto Aero 26 HEPA Wet/Dry Vacuum. Please read this manual thoroughly before using the appliance to ensure proper function and to prevent injury or damage.

The Nilfisk Alto Aero 26 HEPA is a contractor-grade wet/dry vacuum designed for demanding cleaning tasks. It features a 25-liter (7-gallon) capacity, durable construction, and a low noise level. Key features include Push & Clean semi-automatic filter cleaning, auto-tool start for use with electric power tools, a certified HEPA filter, built-in storage for hose and accessories, and an exhaust blow function. It is suitable for collecting drywall dust and meets EPA Lead requirements.

Image: The Nilfisk Alto Aero 26 HEPA Wet/Dry Vacuum, shown in blue and black, with its flexible hose, metal wand, and floor nozzle attached. The vacuum unit features wheels for mobility and controls on top.

Sigurnosne informacije

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury. This appliance is for professional use and should only be operated by trained personnel.

• Ne ostavljajte uređaj bez nadzora kada je uključen. Isključite utikač iz utičnice kada ga ne koristite i prije servisiranja.
• Nemojte koristiti na otvorenom ili na mokrim površinama.
• Ne dozvoliti da se koristi kao igračka. Posebna pažnja je neophodna kada se koristi od strane dece ili u blizini.
• Koristite samo onako kako je opisano u ovom priručniku. Koristite samo dodatke koje preporučuje proizvođač.
• Ne koristite sa oštećenim kablom ili utikačem. Ako uređaj ne radi kako bi trebao, ako je pao, oštećen, ostavljen na otvorenom ili pao u vodu, vratite ga u servisni centar.
• Nemojte vući niti nositi za kabl, koristiti kabl kao ručku, zatvarati vrata na kablu ili vući kabl oko oštrih ivica ili uglova. Ne prebacujete uređaj preko kabla. Držite kabl dalje od zagrejanih površina.
• Ne isključujte utikač povlačenjem za kabl. Za isključivanje, uhvatite utikač, a ne kabl.
• Nemojte rukovati utikačem ili uređajem mokrim rukama.
• Ne stavljajte nikakve predmete u otvore. Ne koristite sa blokiranim otvorom; čistite od prašine, dlačica, dlačica i svega što može smanjiti protok zraka.
• Držite kosu, široku odjeću, prste i sve dijelove tijela dalje od otvora i pokretnih dijelova.
• Ne uzimajte ništa što gori ili dimi, kao što su cigarete, šibice ili vrući pepeo.
• Nemojte koristiti za usisavanje zapaljivih ili zapaljivih tečnosti, kao što je benzin, niti koristiti u područjima gdje bi mogle biti prisutne.
• Nemojte koristiti bez vrećice za prašinu i/ili filtera na mjestu.
• Isključite sve kontrole prije isključivanja.
• Budite posebno oprezni kada čistite na stepenicama.

Postavljanje i montaža

Before first use, ensure all components are present and undamaged. Refer to the included assembly guide for detailed diagrams.

1. Raspakivanje: Pažljivo izvadite sve komponente iz ambalaže. Sačuvajte ambalažu za buduće skladištenje ili transport.
2. Ugradnja točkova: Attach the wheels to the base of the vacuum unit. Ensure they click securely into place.
3. Priključak crijeva: Insert the flexible hose into the suction inlet on the front of the vacuum unit. Twist to lock it securely.
4. Wand and Nozzle Assembly: Connect the metal wand sections together. Attach the desired floor nozzle or accessory to the end of the wand. Connect the other end of the wand to the hose handle.
5. Filter and Dust Bag Installation:
   • For dry vacuuming, ensure the certified HEPA filter is correctly seated and a synthetic dust bag is installed in the tank.
   • For wet vacuuming, remove the dust bag. The HEPA filter can remain, but ensure it is suitable for wet use or remove it if specified by the manufacturer for certain wet applications.
6. Priključak za napajanje: Uključite kabel za napajanje u odgovarajuću uzemljenu električnu utičnicu.

Uputstvo za upotrebu

Basic Operation

1. Uključivanje/isključivanje: Locate the power switch on the top of the vacuum unit. Press to turn the vacuum on or off.
2. Suvo usisavanje: Ensure the dust bag is installed and the HEPA filter is clean. Use appropriate nozzles for the surface being cleaned.
3. Mokro usisavanje: Remove the dust bag. Ensure the HEPA filter is suitable for wet use or removed if necessary. Do not overfill the tank; monitor the water level. The vacuum is equipped with a float system that will stop suction when the tank is full.
4. Exhaust Blow Function: To use the blow function, connect the hose to the exhaust port located on the rear of the vacuum unit. This can be used for blowing away debris or drying surfaces.

Auto-Tool Start Feature

The Aero 26 HEPA features an auto-tool start function, allowing the vacuum to power on automatically when a connected electric power tool is activated.

1. Plug the vacuum's power cord into a wall outlet.
2. Plug your electric power tool into the integrated power outlet on the vacuum unit.
3. Set the vacuum's power switch to the "Auto" or "Tool Start" position (refer to the control panel for specific labeling).
4. When you activate the power tool, the vacuum will automatically turn on. When the power tool is turned off, the vacuum will continue to run for a few seconds to clear the hose, then shut off.
5. Napomena: The auto-tool start feature has a power limit. If the connected tool overloads the circuit, the tool may shut down while the vacuum continues to run. Turn the vacuum off and on again to reset.

Push & Clean Filter Cleaning

The Push & Clean system provides semi-automatic filter cleaning to maintain optimal suction performance.

1. While the vacuum is running, cover the end of the hose or nozzle with your hand.
2. Press and hold the "Push & Clean" button (usually a large button on the top of the unit) for a few seconds. You will hear a change in the motor sound as the filter is vibrated clean.
3. Release the button. Repeat if necessary until suction power is restored.
4. Perform this procedure regularly, especially when you notice a decrease in suction.

Održavanje

Regular maintenance ensures the longevity and optimal performance of your Nilfisk Alto Aero 26 HEPA vacuum.

Održavanje filtera

• HEPA filter: The certified HEPA filter should be inspected regularly. While the Push & Clean system helps, the filter will eventually need manual cleaning or replacement. Tap the filter gently to dislodge dust, or rinse with water if it's a washable filter (check manufacturer's instructions for your specific filter type). Ensure it is completely dry before reinstallation.
• Pre-filter (if applicable): Some models may have a pre-filter. Clean or replace as needed.

Zamjena vrećice za prašinu

• When the dust bag is full, suction power will decrease.
• Isključite usisivač iz utičnice.
• Open the latches and remove the motor head.
• Carefully remove the full dust bag, sealing the opening to prevent dust escape.
• Dispose of the bag according to local regulations, especially if collecting hazardous materials like drywall dust.
• Install a new synthetic dust bag, ensuring it is properly seated in the tank.
• Vratite glavu motora i pričvrstite zasune.

Čišćenje rezervoara

• After wet vacuuming, empty and rinse the tank thoroughly to prevent mold and odors.
• Allow the tank to air dry completely before storing or switching back to dry vacuuming.

Opća njega

• Obrišite spoljašnjost usisivača oglasomamp tkanina. Nemojte koristiti jake hemikalije.
• Inspect the hose, wand, and accessories for blockages or damage. Clear any obstructions.
• Check the power cord for any cuts or fraying. If damaged, have it replaced by a qualified technician.
• Store the vacuum in a dry, protected area. Utilize the built-in storage for the hose and accessories to keep them organized.

Rješavanje problema

This section addresses common issues you might encounter with your vacuum cleaner. If the problem persists after following these steps, contact Nilfisk customer support.

Specifikacije

The following table outlines the key technical specifications for the Nilfisk Alto Aero 26 HEPA Wet/Dry Vacuum (Model B1345677).

Garancija i podrška

Nilfisk products are manufactured to high standards and undergo rigorous quality control. For specific warranty details, please refer to the warranty card included with your product or visit the official Nilfisk webSačuvajte dokaz o kupovini za slučaj reklamacije.

For technical support, spare parts, or service inquiries, please contact Nilfisk customer service. Contact information can typically be found on the Nilfisk webweb-mjestu ili na ambalaži proizvoda.

Online resursi: For additional information, FAQs, and product registration, visit the official Nilfisk webstranica: www.nilfisk.com