1. Uvod
The Seco-Larm Enforcer Electric Door Strike SD-995A-A1Q is designed for secure access control applications, particularly where installation challenges exist. This fail-secure electric door strike is suitable for both metal and wooden doors and features a reversible design for right- or left-handed operation. Its primary function is to secure a door and release it electronically when power is applied (or removed, depending on wiring for fail-secure operation).
2. Ključne karakteristike
- Horizontal Keeper Adjustment: A 1/4-inch (6mm) horizontal keeper adjustment feature reduces installation difficulties, accommodating warped doors or varying latch bolt sizes.
- Svestrana kompatibilnost: Designed to fit both right- or left-handed metal or wooden doors.
- Kompaktan dizajn: Miniature lock body for easier installation in various door frames.
- Izdržljiva konstrukcija: Features a stainless-steel ANSI faceplate and corrosion-resistant case and moving parts for longevity.
- Fail-Secure Operation: The door remains locked during a power outage, ensuring security. This model does not support fail-safe operation.
- visoka izdržljivost: Tested to 500,000 cycles for reliable performance.
3. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- Electric Door Strike (SD-995A-A1Q)
- (2) Montažne pločice
- (2) Machine Screws (narrow)
- Montažna ploča
- Predložak za montažu
- (2) Wood Screws
- (4) Mašinski zavrtnji
- (2) Black Anchor Nuts
- Uputstvo za upotrebu (ovaj dokument)
4. Postavljanje i instalacija
Proper installation is crucial for the reliable operation of the electric door strike. It is recommended that installation be performed by a qualified technician.
4.1 Provjera prije instalacije
- Ensure the door and frame are structurally sound.
- Confirm the door's handing (right or left) and swing direction. The strike's reversible design accommodates both.
- Verify the power supply meets the technical specifications (8~16 VAC/12VDC).
4.2 Koraci instalacije
- Prepare the Door Frame: Use the provided mounting template to mark and cut the necessary opening in the door frame. The miniature lock body facilitates this process.
- Position the Strike: Insert the electric door strike into the prepared opening. Ensure it is flush with the door frame.
- Adjust the Keeper: Utilize the 1/4-inch horizontal keeper adjustment to align the strike with the door's latch bolt. This is particularly useful for doors with slight misalignments or warped frames.
- Secure the Strike: Use the appropriate mounting tabs, machine screws, and wood screws from the package contents to firmly secure the strike to the door frame.
- Ožičenje: Connect the power supply wires to the strike's screw terminals. Ensure correct polarity for DC power. This unit is designed for fail-secure operation, meaning it will lock when power is removed.
- Probni rad: After installation and wiring, test the door strike's functionality with the door closed and open to ensure proper latching and release.
Image showing the Seco-Larm Enforcer Electric Door Strike, highlighting its faceplate and internal mechanism. The horizontal adjustment feature allows for precise alignment with the door's latch bolt.
5. Operacija
The Seco-Larm Enforcer Electric Door Strike SD-995A-A1Q operates in a fail-secure mode. This means that in the event of a power failure, the door strike will remain locked, maintaining security. To unlock the door, power must be applied to the strike, which retracts the keeper, allowing the door to open. When power is removed, the keeper extends, securing the door.
- Normalan rad: When the access control system (e.g., keypad, card reader, intercom) sends a signal, power is applied to the strike, releasinvrata.
- Power Outage: The door remains locked, preventing unauthorized entry.
Note: This model does not support fail-safe operation, where the door would unlock during a power outage.
6. Održavanje
The Seco-Larm Enforcer Electric Door Strike SD-995A-A1Q is designed for minimal maintenance. Regular inspection of the strike and surrounding door hardware is recommended to ensure proper function and alignment.
- čišćenje: Keep the faceplate and keeper area clean from dust and debris. Use a soft, dry cloth. Avoid abrasive cleaners.
- Provjera poravnanja: Periodically check the alignment of the strike with the door's latch bolt. If misalignment occurs, the horizontal keeper adjustment can be used to fine-tune the position.
- podmazivanje: No routine lubrication is typically required for the internal mechanism.
7. Otkrivanje problema
If the electric door strike is not functioning as expected, consider the following common issues:
- Strike Not Releasing:
- Check power supply: Ensure the correct voltage (8~16 VAC/12VDC) is being supplied and that connections are secure.
- Verify wiring: Confirm that the strike is wired correctly for fail-secure operation.
- Check for obstructions: Ensure no debris is preventing the keeper from retracting.
- Door/latch alignment: The door or latch bolt may be misaligned. Adjust the horizontal keeper or the door/latch as needed.
- Vrata se ne zaključavaju sigurno:
- Keeper adjustment: The horizontal keeper may be too far retracted or misaligned. Adjust it to ensure proper engagement with the latch bolt.
- Door/frame issues: Check for door sag or frame warping that might prevent proper latching.
- Intermitentni rad:
- Loose connections: Inspect all wiring connections for tightness and corrosion.
- Power supply fluctuations: Ensure a stable power source.
For complex issues or if troubleshooting steps do not resolve the problem, contact a qualified security technician or Seco-Larm technical support.
8. Specifikacije
| Specifikacija | Detalj |
|---|---|
| Broj modela | SD-995A-A1Q |
| Operacija | Fail-secure (locks door in power outage) |
| Operating Voltage | 8~16 VAC / 12VDC |
| Current Draw (16VAC) | 800mA |
| Current Draw (12VDC) | 750mA |
| Max. Latch Throw | 5/8 inča (16 mm) |
| Latch Depth | 3/4 inča (19 mm) |
| Keeper Depth | 2-1/32 inča (16.8 mm) |
| Strike Depth | 1-1/2 inches overall (38mm) |
| Dizajn | Reversible, Non-Handed |
| Adjustable Keeper | Max. 1/4-inch (6mm) |
| Radna temperatura | 14° do 113°F (-10° do 45°C) |
| Težina | 10.3 unci (292 g) |
| Dimenzije prednje ploče | 4-7/8 x 1-1/4 x 1/8 inča (124 x 32 x 3.2 mm) |
| Odobrenja | CE, RoHS |
| Materijal | Metal (Stainless Steel exterior finish) |
| UPC | 676544017127 |
9. Garancija i podrška
9.1 Informacije o garanciji
The Seco-Larm Enforcer Electric Door Strike SD-995A-A1Q comes with a 3-godišnja garancija od datuma kupovine. Ova garancija pokriva nedostatke u materijalu i izradi pri normalnoj upotrebi. Molimo sačuvajte dokaz o kupovini za reklamacije.
9.2 Tehnička podrška
For technical assistance, installation questions, or warranty service, please contact Seco-Larm customer support. Contact information can typically be found on the manufacturer's official weblokacija ili ambalaža proizvoda.
