Važna sigurnosna uputstva
Before operating the Generac 6922 pressure washer, read and understand all safety warnings and instructions in this manual. Failure to follow these instructions may result in serious injury or property damage.
- Uvijek nosite odgovarajuću ličnu zaštitnu opremu, uključujući zaštitu za oči, zaštitu za sluh i zaštitnu obuću.
- Nikada ne usmjeravajte pištolj za prskanje prema ljudima, kućnim ljubimcima ili električnim uređajima. Mlaz pod visokim pritiskom može uzrokovati ozbiljne povrede.
- Ensure all connections are secure before starting the unit to prevent leaks and loss of pressure.
- Operate the pressure washer in a well-ventilated area to avoid carbon monoxide poisoning from engine exhaust.
- Do not operate the unit if any parts are damaged or missing. Contact Generac customer support for replacement parts.
- Držite djecu i prolaznike podalje od operativnog područja.
- Use only approved fuels and oils as specified in this manual. Store fuel in approved containers and away from ignition sources.
- Always engage the spray gun trigger safety lock when not spraying to prevent accidental discharge.
Product Overview
The Generac 6922 is a gas-powered pressure washer designed for medium-duty residential cleaning tasks. It delivers 2800 PSI and 2.4 GPM, making it suitable for cleaning decks, siding, driveways, and vehicles. Key features include an ergonomic spray gun, integrated detergent tank, and quick-change nozzle tips.

Slika 1: Prednja strana view of the Generac 6922 Gas Powered Pressure Washer.
Ključne komponente
- motor: Generac OHV horizontal-shaft engine provides reliable power.
- pumpa: Delivers high-pressure water for effective cleaning.
- Sprej za pištolje: Ergonomic design with cushion grip and easy-to-pull trigger for reduced fatigue.
- Crevo visokog pritiska: 25-foot hose for extended reach.
- Vrhovi mlaznica: Includes 0-degree, 25-degree, 40-degree, and soap nozzles for various applications.
- Spremnik za deterdžent: Integrated 0.5-gallon tank for convenient on-board detergent storage.
- Točkovi: 10-inch never-flat wheels for easy maneuverability across different terrains.
- Kontrolna tabla: User-friendly controls for on/off, choke, and fuel shutoff.

Slika 2: Prednja strana view of the pressure washer, showing the control panel and spray gun holder.

Slika 3: Bočna strana view of the pressure washer, highlighting the engine and pump assembly.

Slika 4: Pozadi view of the pressure washer, showing the hose connection point.

Figure 5: Close-up of the integrated hose storage on the handle.

Figure 6: Close-up of the Generac OHV engine, showing the fuel cap and pull start.

Figure 7: Close-up of the integrated 0.5-gallon detergent tank.

Figure 8: Close-up of the pump connections, including the water inlet and high-pressure outlet.
Postavljanje i montaža
1. Raspakivanje
Carefully remove all components from the packaging. Inspect for any damage during shipping. Ensure all parts listed in the packing list are present.
2. Sklop ručke
- Slide the upper handle assembly onto the lower frame until the spring buttons engage.
- Secure the handle with the provided knobs or bolts, ensuring it is firmly in place.
3. Connecting the Spray Gun and Hose
- Connect the high-pressure hose to the pump outlet. Tighten securely, preferably with a wrench to prevent leaks.
- Spojite drugi kraj visokotlačnog crijeva na pištolj za prskanje. Osigurajte čvrst spoj.
- Insert the desired quick-change nozzle tip into the spray gun wand until it clicks into place.
4. Dodavanje motornog ulja
The engine may be shipped without oil. Refer to the engine manual for specific oil type and capacity. Typically, 10W-30 oil is recommended. Do not overfill.
- Postavite visokotlačni perač na ravnu površinu.
- Skinite čep/šip za punjenje ulja.
- Slowly add the recommended engine oil until it reaches the full mark on the dipstick.
- Zamijenite čep za punjenje ulja/mjernu šipku.
5. Dodavanje goriva
Use fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel. Always add fuel in a well-ventilated area away from ignition sources.
- Provjerite je li motor isključen i hladan.
- Skinite poklopac goriva.
- Fill the fuel tank, leaving some space for expansion. Do not overfill.
- Čvrsto vratite čep goriva.
6. Priključivanje vodovoda
Connect a standard garden hose to the water inlet on the pump. Ensure the garden hose is free of kinks and has sufficient flow. Turn on the water supply completely before starting the engine.
Operacija
1. Kontrolna lista prije početka
- Provjerite nivo motornog ulja.
- Provjerite nivo goriva.
- Uvjerite se da je dovod vode priključen i uključen.
- Select and install the appropriate nozzle.
- Uvjerite se da su svi priključci crijeva čvrsti.
2. Pokretanje motora
- Otvorite ventil za gorivo (ako je ugrađen).
- Move the choke lever to the 'CHOKE' position (cold engine).
- Postavite prekidač motora u položaj 'UKLJUČENO'.
- Čvrsto povucite uže za pokretanje dok se motor ne pokrene.
- Nakon što se motor pokrene, postepeno pomičite ručicu čoka u položaj 'RUN'.
- Ostavite motor da se zagreje nekoliko trenutaka.
3. Korištenje deterdženta
The integrated 0.5-gallon detergent tank allows for easy application of cleaning solutions.
- Fill the detergent tank with pressure washer safe detergent.
- Install the black soap nozzle onto the spray gun. This nozzle activates the detergent injector.
- Spray the detergent onto the surface to be cleaned. Allow it to soak for a few minutes (do not let it dry).
- Switch to a high-pressure nozzle (e.g., 25-degree) to rinse the surface thoroughly.
4. Odabir mlaznice
The Generac 6922 includes four quick-change nozzle tips:
- 0-degree (Red): Pin-point stream for intense cleaning of small, tough spots. Use with extreme caution.
- 25-degree (Green): Fan spray for general cleaning of most surfaces.
- 40-degree (White): Wide fan spray for gentle cleaning of delicate surfaces.
- Sapun (crni): Low-pressure stream for applying detergents.
5. Procedure čišćenja
- Always start spraying with the nozzle a safe distance from the surface and move closer as needed.
- Use overlapping strokes to ensure even cleaning.
- Work from top to bottom when cleaning vertical surfaces to prevent streaking.
6. Gašenje
- If using detergent, flush the system with clean water by running the pressure washer with the soap nozzle in a bucket of clean water until all detergent is cleared.
- Isključite prekidač motora.
- Isključite dovod vode.
- Stisnite okidač pištolja za prskanje kako biste ispustili preostali pritisak u sistemu.
- Odvojite baštensko crevo i crevo visokog pritiska.
Održavanje
Regular maintenance ensures optimal performance and extends the life of your pressure washer. Always perform maintenance with the engine off and cool, and the spark plug wire disconnected.
1. Zamjena motornog ulja
Change the engine oil after the first 5 hours of operation, then every 50 hours or annually, whichever comes first. Refer to the engine manual for detailed instructions.
2. Čišćenje/zamjena filtera za zrak
Inspect the air filter regularly and clean or replace it as needed, especially in dusty conditions. A dirty air filter can reduce engine performance.
3. Pregled svjećice
Inspect the spark plug annually or every 100 hours. Clean or replace if fouled or damaged. Ensure proper gap setting.
4. Održavanje pumpe
After each use, flush the pump with clean water. For extended storage, use a pump protector to prevent freezing and corrosion.
5. Skladištenje
Before storing the pressure washer for an extended period:
- Drain all fuel from the tank or add a fuel stabilizer.
- Ispraznite karburator.
- Zamijenite motorno ulje.
- Apply pump protector.
- Store in a clean, dry, and frost-free area.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Motor se neće pokrenuti | No fuel; Engine switch OFF; Choke incorrect; Spark plug issue; Low oil shutdown | Add fuel; Turn switch ON; Adjust choke; Inspect/replace spark plug; Check oil level |
| Nizak ili nikakav pritisak | Water supply off/restricted; Air in pump; Clogged nozzle; Detergent nozzle in use | Turn on water, check hose; Purge air from pump; Clean/replace nozzle; Switch to high-pressure nozzle |
| Pulsirajući sprej | Zrak u pumpi; Ograničen dovod vode; Začepljena mlaznica | Purge air; Check water supply/hose; Clean nozzle |
| Deterdžent se ne sifonira | Detergent tank empty; Clogged detergent line; Wrong nozzle in use | Fill tank; Clean line; Use black soap nozzle |
| Voda curi | Labavi spojevi; Oštećeni O-prstenovi/zaptivke | Tighten connections; Inspect/replace O-rings/seals |
Tehničke specifikacije
| Specifikacija | Vrijednost |
|---|---|
| Brand | Generac |
| Broj modela | 6922 |
| Izvor napajanja | Pogon na plin |
| Maksimalni pritisak | 2800 PSI |
| Maksimalni protok | 2.4 galona u minuti (GPM) |
| Dužina creva | 25 stopa |
| Kapacitet rezervoara za deterdžent | 0.5 galona |
| Težina artikla | 57 funti |
| Dimenzije proizvoda | 24.4 x 18.8 x 35.4 inča |
| UPC | 696471069228 |
Informacije o garanciji
This Generac pressure washer is covered by a manufacturer's limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Generac webSačuvajte dokaz o kupovini za slučaj reklamacije.
Korisnička podrška
For technical assistance, replacement parts, or service inquiries, please contact Generac customer support. You can find contact information on the Generac website or in the documentation provided with your pressure washer. Have your model number (6922) and serial number ready when contacting support.





