Uvod
This manual provides essential information for the setup, operation, and maintenance of your Factory Remanufactured Dish Network Joey 2.0 Satellite Receiver. The Joey 2.0 is designed to communicate with a Hopper 3 system, extending full HD DVR functionality and a consistent user interface to additional rooms in your home. It is a compact set-top box that integrates seamlessly with your existing Hopper 3 setup.
Sadržaj paketa
Nakon otvaranja pakovanja, provjerite da li su sve komponente prisutne:
- 1 x Dish Network Joey 2.0 Satellite Receiver
- 1 x daljinski upravljač
- 1 x RCA kabel
- 1 x HDMI kabl
- 2 x AA baterije (za daljinski upravljač)
Slika 1: Front view of the Joey 2.0 receiver, showing the power button, system info, locate remote, and navigation buttons.
Uputstva za postavljanje
- plasman: Position the Joey 2.0 receiver near your television and a power outlet. Ensure adequate ventilation around the unit.
- Povežite se s TV-om:
- For High-Definition (HD) connection, connect one end of the provided HDMI kabl to the HDMI OUT port on the Joey 2.0 and the other end to an available HDMI IN port on your television.
- For Standard-Definition (SD) connection, connect the provided RCA kabel (red, white, yellow) from the A/V OUT ports on the Joey 2.0 to the corresponding A/V IN ports on your television.
- Connect to Hopper 3: The Joey 2.0 connects to your Hopper 3 DVR. This connection is typically established via a coaxial cable from a Solo Hub or directly if your home is wired for MoCA (Multimedia over Coax Alliance). Ensure your Hopper 3 is powered on and functioning correctly.
- Priključak za napajanje: Connect the power adapter to the DC IN port on the Joey 2.0 and then plug it into a wall outlet. The unit will power on automatically.
- Podešavanje daljinskog upravljača: Insert the two AA batteries into the remote control, observing the correct polarity. Follow the on-screen prompts on your television to pair the remote with the Joey 2.0 and program it to control your TV's volume and power.
- Aktivacija: After physical setup, you will need to contact Dish Network customer service to activate the Joey 2.0 and add it to your account. Provide them with the receiver's serial number, which can usually be found on a sticker on the bottom or back of the unit.
Slika 2: Perspektiva view of the Joey 2.0 receiver, highlighting its compact design and ventilation slots.
Uputstvo za upotrebu
The Joey 2.0 operates as an extension of your Hopper 3 DVR, providing access to all its features and content. The user interface is identical to that of the Hopper 3.
- Uključivanje/isključivanje: Pritisnite POWER button on the remote control or the front of the receiver to turn the unit on or off.
- Navigacija: Use the arrow keys on the remote to navigate menus and select options. The SELECT button confirms choices.
- TV uživo: Pritisnite TV UŽIVO button to return to live television.
- vodič: Pritisnite VODIČ button to access the program guide.
- Funkcije DVR-a: All DVR functions, such as recording, pausing, rewinding, and fast-forwarding, are managed through the Hopper 3 and accessible via the Joey 2.0. You can start watching a program in one room and seamlessly resume it in another room with a Joey 2.0.
- Informacije o sistemu: Pritisnite INFORMACIJE O SISTEMU button on the front panel to display system details on your TV screen.
- Locate Remote: Pritisnite LOKACIJA DALJINSKO button on the front panel to make your remote control emit an audible tone, helping you find it.
Održavanje
Proper maintenance ensures the longevity and optimal performance of your Joey 2.0 receiver.
- čišćenje: Za čišćenje vanjske strane prijemnika koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili abrazivne materijale.
- ventilacija: Ensure that the ventilation slots on the receiver are not blocked. Do not place the unit in an enclosed cabinet without proper airflow.
- Ciklus napajanja: If the unit becomes unresponsive, you can perform a power cycle by unplugging it from the power outlet for 10-15 seconds, then plugging it back in. This can resolve minor software glitches.
- Ažuriranja softvera: The Joey 2.0 receives software updates automatically from Dish Network. Ensure the unit remains connected to power and the Hopper 3 for these updates to occur.
Rješavanje problema
This section addresses common issues you might encounter with your Joey 2.0 receiver.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema slike ili zvuka. | Incorrect input selected on TV; loose cable connections; receiver not powered on. |
|
| Daljinski upravljač ne reaguje. | Dead batteries; remote not paired; line of sight obstruction. |
|
| "Loss of Signal" message. | Problem with Hopper 3 connection; coaxial cable issue. |
|
If issues persist after attempting these solutions, please contact Dish Network customer support for further assistance.
Specifikacije
| Broj modela | 2.0 |
| Brand | Dish |
| Dimenzije (D x Š x V) | 10 x 6 x 9 inča |
| Težina artikla | 3.2 funte |
| Boja | Crna |
| Tehnologija povezivanja | HDMI |
| Ukupni USB portovi | 2 |
| Baterije su potrebne | 2 AA baterije (za daljinski upravljač) |
| Prvi raspoloživi datum | 1. februara 2016 |
Garancija i podrška
This Factory Remanufactured Dish Network Joey 2.0 Satellite Receiver comes with specific warranty and return conditions.
- Povratak: Returns on opened receivers are generally not accepted. Unopened receivers must be returned within 24 hours of receipt.
- Defective Units: If the receiver does not function within 7 days of receipt, an exchange may be allowed upon return of the defective unit.
- Garancija proizvođača: Dish Network provides a 1-year warranty on the receiver after activation.
For technical support, activation, or warranty claims, please contact Dish Network customer service directly. Ensure you have your receiver's serial number ready when contacting support.
