1. Uvod
This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Weiser Powerbolt Electronic Deadbolt, Model 9GED14600-101. This electronic deadbolt offers enhanced security and convenience with its keyless touchpad entry and traditional key access. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the lifespan of your product.
Slika 1: Prednja strana view of the Weiser Powerbolt Electronic Deadbolt, showcasing the keypad and keyhole. This image displays the gold finish of the lock.
2. Važne informacije o sigurnosti
Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje proizvoda:
- Do not attempt to disassemble or modify the lock beyond the instructions provided in this manual.
- Use only the specified battery type (4 AA batteries). Do not mix old and new batteries or different types of batteries.
- Keep all components, especially small parts, out of reach of children.
- Ensure proper alignment during installation to prevent binding or excessive force on the deadbolt mechanism.
- Protect the keypad from excessive moisture or direct water exposure.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- Sklop vanjske tastature
- Interior Assembly (Turn Knob)
- Deadbolt Latch
- Strike Plate
- Montažna ploča
- Montažni vijci
- Ključevi (2)
- SmartKey Learning Tool
- Installation Guide / Drilling Template
Slika 2: Bočna strana view of the interior assembly of the Weiser Powerbolt Electronic Deadbolt, showing the turn knob and battery compartment area.
4. Upute za instalaciju
Before you begin, measure your door's backset, cross bore, and thickness to ensure compatibility. This lock is designed for standard door preparations with a 2-1/8" bore hole and 2-3/8" or 2-3/4" backsets.
- Pripremite vrata: If installing on a new door, use the provided drilling template to prepare the necessary holes. For existing doors, ensure the bore hole and backset are compatible.
- Instalirajte bravu: Insert the deadbolt latch into the edge of the door. Ensure the "UP" arrow on the latch is pointing upwards. Adjust the backset if necessary (2-3/8" or 2-3/4"). Secure with screws.
- Instalirajte vanjsku tastaturu: Feed the cable from the exterior keypad assembly through the cross bore hole. Position the keypad flush against the door.
- Instalirajte montažnu ploču: Route the cable through the mounting plate. Secure the mounting plate to the door using the provided screws, ensuring it holds the exterior keypad in place.
- Povezivanje kablova: Connect the cable from the exterior keypad to the interior assembly. Ensure the connection is secure.
- Instalirajte unutrašnji sklop: Position the interior assembly over the mounting plate, aligning the turn knob shaft with the deadbolt mechanism. Secure the interior assembly to the mounting plate with the remaining screws.
- Instalirajte baterije: Open the battery cover on the interior assembly and insert 4 new AA alkaline batteries. Observe correct polarity. Close the battery cover.
- Probni rad: With the door open, test the lock's function using the turn knob and the keypad with the default code (if applicable) or a newly programmed code. Ensure the deadbolt extends and retracts smoothly without obstruction.
5. Programske instrukcije
The Powerbolt Electronic Deadbolt allows for the creation of a Master Code and up to 6 User Codes. The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
Figure 3: Visual representation of key features of the Powerbolt 2, including One Touch Locking, Master Code, User Codes, Bump-Proof, Pick-Proof, and Kick-In Resistant technology.
5.1. Postavljanje glavnog koda
The Master Code is essential for programming. If not set, the first code programmed will become the Master Code.
- Press the "Program" button (usually located on the interior assembly).
- Enter a new 4-8 digit Master Code.
- Press the "Lock" button.
- Re-enter the new Master Code.
- Press the "Lock" button again. A successful programming tone will sound.
5.2. Dodavanje korisničkih kodova
You can store up to 6 unique user codes for access.
- Enter your Master Code.
- Press the "Program" button.
- Press "1" (for adding a user code).
- Enter a new 4-8 digit User Code.
- Press the "Lock" button. A successful programming tone will sound.
5.3. Brisanje korisničkih kodova
- Enter your Master Code.
- Press the "Program" button.
- Press "2" (for deleting a user code).
- Unesite korisnički kod koji želite izbrisati.
- Press the "Lock" button. A successful programming tone will sound.
5.4. Enabling/Disabling Auto-Lock
The lock can be set to automatically re-lock 30 seconds after unlocking.
- Kako bi se omogućilo: Enter Master Code, press "Program", press "3", press "Lock".
- Za onemogućavanje: Enter Master Code, press "Program", press "4", press "Lock".
6. Uputstvo za upotrebu
6.1. Zaključavanje vrata
- Izvana: Press the "Lock" button on the keypad. The deadbolt will extend.
- Iz unutrašnjosti: Rotate the turn knob to the locked position.
6.2. Otključavanje vrata
- Korištenje korisničkog koda: Enter a valid 4-8 digit User Code on the keypad. The deadbolt will retract.
- Using a Key: Insert the key into the keyhole and turn to unlock.
- Iz unutrašnjosti: Rotate the turn knob to the unlocked position.
7. Održavanje
7.1. Zamjena baterije
The lock requires 4 AA alkaline batteries. A low battery indicator will alert you when batteries need replacement. Replace all four batteries simultaneously with new ones.
- Uklonite poklopac baterije na unutrašnjem sklopu.
- Uklonite stare baterije.
- Umetnite 4 nove AA alkalne baterije, pazeći na ispravan polaritet (+/-).
- Vratite poklopac baterije.
Napomena: Replacing batteries does not erase programmed codes.
7.2. Čišćenje
Očistite bravu mekom krpomamp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače, jer mogu oštetiti završnu obradu i elektroničke komponente.
7.3. SmartKey Rekeying
The SmartKey cylinder allows you to rekey your lock to a new key in seconds. Refer to the separate SmartKey rekeying instructions provided with your lock or visit the Weiser website for a video tutorial. You will need your existing key, the new key, and the SmartKey learning tool.
8. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Brava ne reaguje na unos sa tastature. | Dead batteries. Incorrect code entered. Keypad malfunction. | Replace batteries. Ensure correct code is entered. Use the key to unlock and contact support if issue persists. |
| Zasun se ne izvlači niti uvlači u potpunosti. | Misalignment during installation. Obstruction in door frame. Low batteries. | Check door and frame for obstructions. Verify lock alignment. Replace batteries. |
| Auto-lock feature not working as expected. | Auto-lock feature is disabled. | Refer to Section 5.4 to enable the auto-lock feature. |
| Lock makes unusual noises or jams. | Mechanical issue, potential deadbolt barrel misalignment or damage. | Ensure the deadbolt barrel is not obstructed or misaligned. If the issue persists, contact Weiser customer support. |
| Ne mogu programirati nove kodove. | Incorrect Master Code. Program button not pressed correctly. | Verify Master Code. Ensure the Program button is pressed firmly. Refer to Section 5. |
9. Specifikacije proizvoda
- Model: 9GED14600-101
- Brand: Weiser
- Vrsta brave: Elektronska zasun tastature
- Materijal: Brass
- Boja: Zlato
- Dimenzije (D x Š x V): 6 x 11.13 x 4 inča
- Težina artikla: 2.4 funte
- Izvor napajanja: 4 AA baterija (nisu uključene)
- Posebna karakteristika: Battery Indicator, SmartKey Rekeying
- Backset: Podesivo 2-3/8" ili 2-3/4"
- Bore Hole: 2-1/8"
- Korisnički kodovi: Do 6
- ANSI/BHMI Rating: Razred 3
10. Garancija i korisnička podrška
For warranty information, technical assistance, or to purchase replacement parts, please contact Weiser customer support directly. Details can typically be found on the official Weiser weblokaciji ili unutar ambalaže proizvoda.
Weiser Official Webstranica: www.weiserlock.com
Please have your model number (9GED14600-101) and purchase date available when contacting support.
