Hubbell-Raco 2205 1-1/4-inčni stiskajući konektor od 90 stepeni Uputstvo za upotrebu

1. Uvod

This manual provides detailed instructions for the proper installation and use of the Hubbell-Raco 2205 1-1/4-inch 90-Degree Squeeze Connector. This connector is designed for securing and terminating flexible metal conduit, armored cable, and metal-clad cable to an electrical box or enclosure at a 90-degree angle. Adherence to these instructions ensures safe and effective operation.

2. Proizvod je gotovview

The Hubbell-Raco 2205 Squeeze Connector is constructed from malleable iron and features a zinc-electroplated finish for enhanced corrosion protection. Its 90-degree design facilitates installations where space is limited or a directional change is required. The squeeze-type mechanism provides a secure connection for various cable and conduit types.

Figure 1: Hubbell-Raco 2205 1-1/4-inch 90-Degree Squeeze Connector. This image displays the connector's malleable iron construction, zinc-electroplated finish, and the two screws used for the squeeze mechanism.

Ključne karakteristike:

• Malleable Construction: Ensures mechanical protection for the raceway.
• Zinc-Electroplated: Provides added corrosion protection for durability.
• 90-Degree Angle: Ideal for installations requiring a bend or tight spaces.
• Kompatibilnost: Suitable for 1-1/4 inch Flexible Metal Conduit (FMC), Armored Cable (AC), and Metal-Clad Cable (MC).

3. Sigurnosne informacije

Always prioritize safety when working with electrical components. Failure to follow these safety guidelines may result in electric shock, fire, or personal injury.

• Isključite napajanje: Always turn off the power at the circuit breaker or fuse box before beginning any electrical work. Verify that power is off using a voltage tester.
• Kvalificirano osoblje: Installation should be performed by a qualified electrician or in accordance with local electrical codes and regulations.
• Odgovarajući alati: Use appropriate tools for installation, including screwdrivers, wire strippers, and conduit cutters.
• Pregledajte komponente: Before installation, inspect the connector and associated cables/conduits for any damage. Do not use damaged components.
• Sigurne veze: Ensure all connections are tight and secure to prevent loose wiring, which can cause overheating or arcing.

4. Upute za instalaciju

Follow these steps for proper installation of the Hubbell-Raco 2205 Squeeze Connector:

1. Prepare Power: Ensure all power to the circuit is turned off at the main service panel. Confirm with a voltage tester.
2. Prepare Cable/Conduit: Cut the flexible metal conduit, armored cable, or metal-clad cable to the desired length. Remove any burrs from the cut end. If using armored or metal-clad cable, ensure the outer jacket is properly stripped to expose the conductors and any bonding strip, following cable manufacturer guidelines.
3. Insert Cable/Conduit: Loosen the two squeeze screws on the connector body. Insert the prepared end of the 1-1/4 inch flexible metal conduit or cable into the opening of the squeeze connector until it is fully seated.
4. Sigurna veza: Tighten the two squeeze screws firmly and evenly with a screwdriver. Ensure the cable or conduit is securely gripped by the connector and cannot be pulled out. Do not overtighten, as this can damage the cable or conduit.
5. Attach to Enclosure: Insert the threaded end of the 90-degree squeeze connector into the appropriate 1-1/4 inch knockout opening of the electrical box or enclosure.
6. Fasten Locknut: Secure the connector to the electrical box by threading the provided locknut onto the connector's threaded end from inside the box. Tighten the locknut firmly with a wrench or pliers to ensure a secure and grounded connection.
7. Završni pregled: Visually inspect all connections to ensure they are tight and properly installed.

5. Održavanje

The Hubbell-Raco 2205 Squeeze Connector requires minimal maintenance. Periodically inspect installed connectors for:

• korozija: Check for any signs of rust or corrosion, especially in damp okruženja.
• Zategnutost: Ensure the squeeze screws and locknut remain tight. Loose connections can lead to electrical hazards.
• Šteta: Look for any physical damage to the connector or the conduit/cable it secures. Replace damaged components immediately.

6. Otkrivanje problema

Ako naiđete na probleme tokom ili nakon instalacije, razmotrite sljedeće:

• Cable/Conduit Not Secure: If the cable or conduit slips, ensure the squeeze screws are tightened sufficiently and evenly. Verify that the cable/conduit size matches the connector's specified size (1-1/4 inch).
• Connector Not Fitting Knockout: Confirm that the knockout opening in the electrical box is the correct 1-1/4 inch size.
• Problemi sa uzemljenjem: Ensure the locknut is securely tightened against the electrical box to establish proper grounding.

7. Specifikacije

8. Garancija i podrška

For warranty information or technical support regarding your Hubbell-Raco 2205 Squeeze Connector, please refer to the official RACO website or contact RACO customer service directly. Keep your purchase receipt for any warranty claims.

You can find more information about RACO products and support at their official store: RACO Store on Amazon.