1. Uvod
This manual provides essential information for the proper installation, maintenance, and care of your Puig 7692C Carbon Look Windshield. Designed specifically for Kawasaki Z1000 motorcycles from 2014 to 2017, this product enhances the aesthetic and aerodynamic profile of your vehicle. Please read these instructions thoroughly before proceeding with installation or use.
2. Proizvod je gotovview
The Puig 7692C Carbon Look Windshield is crafted from high-impact acrylic, offering both strength and flexibility. Its 3mm thickness is engineered to absorb vibrations at high speeds and provide resistance against cracking or scratching. The design is developed through wind tunnel testing to optimize aerodynamic performance and rider comfort.
Image 2.1: Individual components of the Puig 7692C Carbon Look Windshield.
Ključne karakteristike:
- Materijal: High-impact acrylic for durability and flexibility.
- debljina: 3mm, designed to reduce vibration and resist damage.
- Dizajn: Aerodynamically optimized through wind tunnel testing.
- završiti: Carbon Look for enhanced aesthetic appeal.
3. Sigurnosne informacije
Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage to the product or motorcycle.
- Ensure the motorcycle is stable and securely supported before beginning installation.
- Nosite odgovarajuću ličnu zaštitnu opremu, kao što su rukavice i zaštita za oči.
- Do not overtighten fasteners, as this can damage the windshield or mounting points.
- Verify all components are correctly installed and secure before operating the motorcycle.
- Ako niste sigurni u vezi bilo kojeg koraka procesa instalacije, obratite se kvalificiranom mehaničaru za motocikle.
4. Sadržaj paketa
Molimo Vas da provjerite da li su sve komponente prisutne i neoštećene prije nego što nastavite s instalacijom.
- Puig 7692C Carbon Look Windshield (Main Body)
- Mounting Hardware Kit (screws, washers, spacers, brackets as applicable)
- Upute za instalaciju (ovaj dokument)
5. Postavljanje i instalacija
The following steps outline the general procedure for installing the Puig 7692C Windshield. Specific details may vary slightly depending on your motorcycle's exact configuration. Refer to your motorcycle's service manual for specific torque specifications if available.
- Pripremite motocikl: Park the motorcycle on a level surface and ensure it is stable. Turn off the engine and remove the ignition key.
- Identifikujte tačke montaže: Locate the designated mounting points on your Kawasaki Z1000 (2014-2017) for the windshield. These are typically around the headlight or instrument cluster area.
- Attach Brackets (if applicable): If separate mounting brackets are provided, attach them to the motorcycle using the specified hardware. Do not fully tighten at this stage.
- Position the Windshield: Carefully align the Puig windshield with the mounting brackets or direct mounting points.
- Secure the Windshield: Insert the provided screws and fasteners through the windshield and into the mounting points or brackets. Hand-tighten all fasteners initially.
- Podesite poravnanje: Once all fasteners are in place, adjust the windshield for optimal alignment and fitment.
- Završno zatezanje: Systematically tighten all fasteners to the manufacturer's recommended torque specifications. Avoid overtightening.
- Završni pregled: Double-check all connections to ensure they are secure and that the windshield is firmly attached without any play.
Image 5.1: Puig 7692C Windshield installed on a Kawasaki Z1000.
Slika 5.2: Detaljno view of the Puig 7692C Windshield mounting area on a Kawasaki Z1000.
6. Održavanje
Proper care will extend the life and maintain the appearance of your Puig windshield.
- čišćenje: Use a soft cloth and mild soap with water to clean the windshield. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the acrylic surface.
- Sušenje: Dry with a clean, soft microfiber cloth to prevent water spots and scratches.
- inspekcija: Periodically check all mounting hardware for tightness. Vibrations during riding can cause fasteners to loosen over time.
- Šteta: If the windshield sustains significant damage (cracks, deep scratches), consider replacement to maintain structural integrity and clear visibility.
7. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Prekomjerna vibracija | Loose mounting hardware. Incorrect installation. | Check and tighten all mounting screws. Ensure all components are correctly seated. |
| Poor Fitment | Incorrect model application. Misaligned components. | Verify the windshield is the correct model (7692C) for your Kawasaki Z1000 (2014-2017). Re-align and re-install components carefully. |
| Scratches/Hazing | Improper cleaning methods. Abrasive materials used. | Use only soft cloths and mild soap for cleaning. Avoid dry wiping or harsh chemicals. Minor scratches may be polished with specialized acrylic polish. |
8. Specifikacije
| Atribut | Detalj |
|---|---|
| Broj modela | 7692C |
| Brand | Puig |
| Materijal | High-impact Acrylic |
| Boja | Carbon Look |
| Debljina | 3mm |
| Kompatibilno vozilo | Kawasaki Z1000 (2014-2017) |
| Težina artikla | 2.43 funte |
| Dimenzije proizvoda | 22 x 18 x 10 inča |
9. Garancija i podrška
Za informacije o garanciji proizvoda, molimo vas da se obratite službenom Puig servisu. webstranicu ili kontaktirajte ovlaštenog Puig prodavača. Uslovi garancije mogu se razlikovati u zavisnosti od regije i prodavača.
For technical support or further inquiries, please visit the official Puig website or contact their customer service department. You may also refer to the seller from whom you purchased this product.
Puig Official Webstranica: www.puig.tv
