Pramac P2000i Inverter Generator User Manual

1. Uvod

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Pramac P2000i Inverter Generator. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

The Pramac P2000i is a compact and lightweight inverter generator designed for various light applications. It features a robust Yamaha MZ80 4-stroke gasoline engine, providing a maximum output of 2000W. Its inverter technology ensures stable power, suitable for sensitive electronics. The unit includes a 230V 16A Schuko outlet, a 12V DC outlet, and parallel connection capability.

Figure 1: Pramac P2000i Inverter Generator. This image shows the compact design of the generator, typically featuring a control panel, fuel cap, and carrying handle.

2. Sigurnosne informacije

UPOZORENJE: Nepoštivanje ovih sigurnosnih uputa može dovesti do ozbiljnih povreda ili smrti.

• Opasnost od ugljičnog monoksida: Generators produce carbon monoxide, a colorless, odorless, poisonous gas. Operate generators outdoors only, far away from windows, doors, and vents. Never operate indoors, in a garage, or in any enclosed space.
• Opasnost od strujnog udara: Do not operate the generator in wet conditions. Ensure all electrical connections are dry and secure. Never touch the generator with wet hands.
• Opasnost od požara: Gasoline is highly flammable. Refuel in a well-ventilated area with the engine off and cool. Do not smoke or allow open flames near the generator. Store fuel in an approved container.
• Vruće površine: Motor i prigušivač generatora se veoma zagriju tokom rada i ostaju vrući još neko vrijeme nakon gašenja. Izbjegavajte dodirivanje vrućih površina kako biste spriječili opekotine.
• Djeca i kućni ljubimci: Keep children and pets away from the generator, especially during operation.
• uzemljenje: Always properly ground the generator before use to prevent electrical shock. Consult local electrical codes for proper grounding procedures.

3. Postavljanje i priprema

Before starting your Pramac P2000i generator, perform the following steps:

1. Raspakivanje: Pažljivo izvadite generator iz ambalaže. Pregledajte da li ima oštećenja prilikom transporta.
2. plasman: Place the generator on a firm, level surface outdoors, away from any combustible materials and at least 1 meter (3 feet) from buildings or other equipment. Ensure adequate ventilation.
3. Dodajte motorno ulje: The engine is shipped without oil. Remove the oil filler cap/dipstick and add the recommended engine oil (e.g., SAE 10W-30) up to the upper level mark on the dipstick. Do not overfill. The Yamaha MZ80 engine requires specific oil. Refer to the engine manual for exact specifications.
4. Dodajte gorivo: Ensure the engine is off and cool. Open the fuel tank cap and carefully fill the tank with fresh, unleaded gasoline (minimum 87 octane). The fuel tank capacity is 4.2 liters. Do not overfill; leave space for fuel expansion. Securely close the fuel cap.
5. uzemljenje: Spojite žicu za uzemljenje s terminala za uzemljenje generatora na odgovarajući izvor uzemljenja, u skladu s lokalnim električnim propisima.

4. Uputstvo za upotrebu

4.1 Pokretanje generatora

1. Osigurajte da su sva električna opterećenja isključena s generatora.
2. Okrenite ventil za gorivo u položaj "UKLJUČENO".
3. Pomaknite ručicu čoka u položaj "ČOK" (ako je motor hladan).
4. Okrenite prekidač motora u položaj "UKLJUČENO".
5. Pull the recoil starter handle slowly until resistance is felt, then pull briskly. Repeat if necessary until the engine starts.
6. Nakon što se motor pokrene, postepeno pomaknite ručicu čoka u položaj "RUN".
7. Ostavite motor da se zagrije nekoliko minuta prije spajanja električnih opterećenja.

4.2 Spajanje električnih opterećenja

• The generator provides one 230V 16A Schuko outlet and one 12V DC outlet.
• Connect appliances one at a time, starting with the highest wattage uređaj.
• Do not exceed the generator's rated output of 1600W (continuous) or 2000W (maximum). Overloading will trip the circuit breaker.
• For parallel operation, use the provided parallel connection cables to link two Pramac P2000i units for increased power output (up to 3.2 kW). Refer to the parallel kit instructions for detailed setup.

4.3 Zaustavljanje generatora

1. Odvojite sva električna opterećenja od generatora.
2. Okrenite prekidač motora u položaj "ISKLJUČENO".
3. Okrenite ventil za gorivo u položaj "ISKLJUČENO".

5. Održavanje

Regular maintenance is crucial for the longevity and reliable operation of your generator. Always ensure the engine is off and cool before performing any maintenance.

• motorno ulje: Check oil level before each use. Change engine oil after the first 20 hours of operation, then every 50-100 hours or annually, whichever comes first.
• Filter zraka: Provjeravajte filter zraka svakih 50 sati ili češće u prašnjavim uvjetima. Očistite ili zamijenite po potrebi.
• svjećica: Pregledajte svjećicu svakih 100 sati. Očistite je ili zamijenite ako je zaprljana ili istrošena.
• Filter goriva: Inspect and clean the fuel filter periodically.
• Skladištenje: For long-term storage, drain the fuel tank and carburetor, or add a fuel stabilizer. Remove the spark plug and add a small amount of engine oil into the cylinder, then pull the recoil starter a few times to distribute the oil.

6. Otkrivanje problema

7. Specifikacije

8. Garancija i podrška

Pramac products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Pramac webSačuvajte dokaz o kupovini za slučaj reklamacije.

For technical assistance, spare parts, or service, please contact your authorized Pramac dealer or customer support. Provide your generator's model number (PF162S8I000) and serial number when contacting support.

Official Pramac Webstranica: www.pramac.com