AngelEye CO-AE-9B-FR

AngelEye CO-AE-9B-FR Carbon Monoxide Detector User Manual

Model: CO-AE-9B-FR | Brand: AngelEye

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your AngelEye CO-AE-9B-FR Carbon Monoxide (CO) Detector. Please read these instructions carefully before use and retain them for future reference. This device is designed to detect carbon monoxide gas and alert occupants to its presence, helping to prevent CO poisoning.

Važne informacije o sigurnosti:

  • This CO detector is not a substitute for a smoke detector.
  • Regular testing of the device is crucial for ensuring its proper function.
  • Never ignore a CO alarm. Follow the instructions in the 'Alarm Conditions and Response' section immediately.

2. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

  • AngelEye CO-AE-9B-FR Carbon Monoxide Detector
  • Vijci za montažu i zidni utikači
  • 2 x 1.5V AA alkalne baterije
  • Uputstvo za upotrebu

3. Proizvod je gotovview

The AngelEye CO-AE-9B-FR detector features a user-friendly design with clear indicators and a central test button.

AngelEye CO-AE-9B-FR Carbon Monoxide Detector front view

Slika 1: Front view of the AngelEye CO-AE-9B-FR Carbon Monoxide Detector. It is a white rectangular unit with rounded corners. On the left side, there is a large circular button labeled 'TEST/PAUSE'. To the right of this button, there are two smaller circular indicator lights. The top light is labeled 'Marche' (On/Power) and the bottom light is labeled 'Alarme' (Alarm). Further to the right, there are three horizontal ventilation slots.

Ključne komponente:

  • TEST/PAUSE Button: Used to test the detector's functionality and to silence a temporary alarm.
  • Marche (On) Indicator: Illuminates to indicate the device is powered on and functioning correctly.
  • Alarme (Alarm) Indicator: Illuminates and flashes during a CO alarm event.
  • Ventilacijski otvori: Allow CO gas to enter the sensor chamber. Do not obstruct.

4. Instalacija

4.1 Odabir lokacije

For optimal performance and safety, consider the following:

  • Install at least one CO detector on each level of your home, especially near sleeping areas.
  • Place the detector in rooms with fuel-burning appliances (e.g., furnaces, water heaters, fireplaces).
  • Mount on a wall or ceiling. If wall-mounted, place it at eye level or higher, but at least 15 cm (6 inches) from the ceiling.
  • Avoid placing the detector in direct sunlight, near vents, fans, or in areas with high humidity (e.g., bathrooms).
  • Keep at least 1 meter (3 feet) away from fuel-burning appliances to prevent nuisance alarms from initial startup fumes.

4.2 Instalacija baterije

  1. Otvorite poklopac pretinca za baterije na stražnjoj strani detektora.
  2. Insert the two 1.5V AA alkaline batteries, ensuring correct polarity (+ and -).
  3. Close the battery compartment cover securely. The detector will emit a short beep and the 'Marche' indicator will flash, indicating it is powered on.

4.3 Montiranje detektora

  1. Once the location is chosen, mark the positions for the mounting screws on the wall or ceiling.
  2. Drill holes and insert the wall plugs (if necessary).
  3. Secure the mounting bracket (if separate) or the detector directly using the provided screws.
  4. Ensure the detector is firmly attached and stable.

5. Uputstvo za upotrebu

5.1 Početno napajanje

After battery installation, the detector will perform a self-test. The 'Marche' indicator will flash, and a short beep may sound. The device is then operational.

5.2 Normalan rad

During normal operation, the 'Marche' (On) indicator light will flash approximately once every 30-60 seconds, indicating that the detector is actively monitoring for carbon monoxide.

5.3 Funkcija testiranja

It is recommended to test your CO detector weekly to ensure it is functioning correctly.

  1. Press and hold the large 'TEST/PAUSE' button for a few seconds.
  2. The detector will emit a loud alarm sound, and the 'Alarme' indicator will flash.
  3. Release the button. The alarm will stop, and the detector will return to normal monitoring mode.

If the alarm does not sound during the test, refer to the 'Troubleshooting' section.

5.4 Alarm Conditions and Response

If the detector senses a dangerous level of carbon monoxide, it will activate a loud intermittent alarm sound, and the 'Alarme' indicator will flash rapidly.

Ako se oglasi alarm:

  1. Immediately move to fresh air outdoors or open all doors and windows to ventilate the area.
  2. Izvršite popis kako biste provjerili da li su sve osobe evidentirane.
  3. Do not re-enter the premises until the alarm has stopped and the area has been thoroughly ventilated.
  4. Pozovite hitne službe ili kvalifikovanog tehničara da istraži izvor CO.
  5. Do not use fuel-burning appliances until they have been checked by a professional.

5.5 Pause Function (Hush Mode)

In some cases, a temporary, non-threatening source of CO (e.g., fumes from a cleaning product) might trigger a nuisance alarm. The detector may feature a 'Pause' or 'Hush' function.

  • Press the 'TEST/PAUSE' button briefly during an alarm.
  • This will temporarily silence the alarm for a few minutes (e.g., 5-10 minutes).
  • If the CO level remains high, the alarm will reactivate after the pause period.
  • Do not use the pause function if you suspect a genuine CO leak.

6. Održavanje

6.1 Redovno testiranje

Test your CO detector weekly by pressing the 'TEST/PAUSE' button as described in section 5.3.

6.2 Čišćenje

Clean the exterior of the detector regularly (at least once a month) with a soft, damp cloth. Do not use cleaning agents or solvents. Do not paint the detector, as this can block the ventilation slots and interfere with sensor operation.

6.3 Zamjena baterije

The detector has a battery life of approximately 1 year. When the batteries are low, the detector will emit a regular chirp (e.g., every 30-60 seconds) and the 'Marche' indicator may flash differently or not at all. Replace the batteries immediately with two new 1.5V AA alkaline batteries. Refer to section 4.2 for battery installation instructions.

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Detector does not alarm during test.Dead or incorrectly installed batteries. Faulty unit.Check battery installation and replace if necessary. If problem persists, replace the unit.
Detector chirps regularly (e.g., every 30-60 seconds).Upozorenje o niskoj bateriji.Odmah zamijenite baterije.
Nuisance alarm (false alarm).Temporary CO source (e.g., fumes from cleaning products, car exhaust near an open window).Ventilate the area. Use the 'Pause' function if available and appropriate. Relocate the detector if nuisance alarms are frequent.
Alarm se neprekidno oglašava.High CO concentration detected.Follow 'Alarm Conditions and Response' immediately (Section 5.4).

8. Specifikacije

  • Model: CO-AE-9B-FR (Reference: CO-AE9B-FRR)
  • Brand: AngelEye
  • Izvor napajanja: Napaja se baterijama
  • baterije: 2 x 1.5V AA alkaline batteries (included)
  • Trajanje baterije: Približno 1 godina
  • Dimenzije (D x Š x V): 13.3 x 13.3 x 4 cm (5.2 x 5.2 x 1.6 inča)
  • Težina: 100 grama (3.5 unce)
  • Certifikati: CE certificiran
  • UPC: 816317001834

9. Garancija i podrška

The AngelEye CO-AE-9B-FR Carbon Monoxide Detector comes with a 7 godine garancije od datuma kupovine, pokrivajući nedostatke u materijalu i izradi pri normalnoj upotrebi.

For warranty claims, technical support, or further assistance, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.

Povezani dokumenti - CO-AE-9B-FR

Preview AngelEye Desktop Reader User Guide - OCR Text-to-Speech Device
Official user guide for the AngelEye Desktop Reader by NextVPU (Shanghai) Co., Ltd. This guide covers product overview, usage instructions, specifications, precautions, and troubleshooting for this AI-powered OCR device.
Preview First Alert CO-FA-9B Carbon Monoxide Alarm User Manual
User manual for the First Alert CO-FA-9B Carbon Monoxide Alarm, providing instructions on installation, operation, maintenance, and troubleshooting for this home safety device.
Preview Panasonic VIXELL: Napredni termički izolirani transporteri za farmaceutski hladni lanac
Istražite Panasonic VIXELL, vodeće rješenje za višekratnu upotrebu s toplinski izoliranim transportom dizajnirano za zahtjevni farmaceutski hladni lanac. Zahvaljujući inovativnoj tehnologiji vakuumski izoliranog kućišta (VIC), VIXELL osigurava izuzetne performanse hlađenja, robusnost i pouzdanost za globalni transport.
Preview Potter AFC-50 Kontrolna ploča za protivpožarni alarm: Karakteristike, specifikacije i pribor
Sveobuhvatan krajview analogne/adresibilne protivpožarne kontrolne ploče Potter AFC-50, s detaljnim opisom ključnih karakteristika, tehničkih specifikacija, dodatne opreme za SLC petlju, modula, korisničkog sučelja, opcija povezivanja i informacija o naručivanju. Dizajnirana za jasnoću, pristupačnost i SEO.
Preview Hunicom uputstvo za upotrebu dvosmjernog radija
Korisnički priručnik za Hunicom dvosmjerne radio stanice, s detaljnim opisom rada, karakteristika i specifikacija za modele poput FR-168.
Preview Acrovyn SCR-80 Ograde za udarce: Tehnički list i vodič za ugradnju | Građevinske specijalnosti
Sveobuhvatni tehnički podaci i upute za ugradnju za Acrovyn SCR-80 i SCR-80M teške i srednje opterećene ograde za odbijanje udara proizvođača Construction Specialties. Saznajte više o komponentama, specifikacijama i postupcima ugradnje.