Rev-A-Shelf LD-0220-50SC Uputstvo za upotrebu za šarke sa sporim zatvaranjem

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinges. Please read this manual thoroughly before installation and retain it for future reference.

Sigurnosne informacije

Uvijek nosite odgovarajuću zaštitnu opremu, uključujući zaštitu za oči, tokom instalacije.
Osigurajte da su svi alati u dobrom radnom stanju.
Držite male dijelove podalje od djece kako biste spriječili opasnost od gušenja.
Ako niste sigurni u vezi s bilo kojim korakom, obratite se kvalificiranom stručnjaku.

Sadržaj paketa

(1) Left Soft-Close Pivot Hinge
(1) Right Soft-Close Pivot Hinge
(1) Pakovanje vijaka

Image: A pair of Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinges, showing the spring-loaded mechanism and mounting plates.

Specifikacije

Feature	Detalj
Broj modela	LD-0220-50SC
Materijal	Metal
Tip završetka	Nedovršeno
Vrsta montaže	Montaža na lice
Ugao otvaranja	50 stepeni
Dimenzije (Š x D x V)	1" (26 mm) W x 2-5/8" (67 mm) D x 3-7/8" (99 mm) H
Uključene komponente	(1) Left hinge, (1) right hinge, and screw pack

Postavljanje i instalacija

Proper installation is key to the smooth operation of your soft-close pivot hinges. Follow these steps carefully.

1. Measure Your Cabinet Opening

Before installing, accurately measure the width, height, and depth of your cabinet opening. This ensures compatibility and proper fit for any accessories you plan to use with the tip-out tray.

Video: This video from Rev-A-Shelf provides guidance on how to measure your cabinet opening correctly for various products.

Video: This video explains how to measure and determine if your cabinet hinge is a 1/2" overlay, which is important for proper fit.

2. Pripremite se za instalaciju

Identify the left (L) and right (R) hinges.
Ensure you have all necessary tools: drill, 3/32 drill bit, pencil, and screwdriver.

3. Mark and Drill Holes on Face Frame

With the drawer front panel still installed (or aligned to its desired location), use a pencil to lightly mark its perimeter on the front of the face frame.
Remove the drawer front panel.
Place one hinge on the appropriate side of the face frame. Align it so the bottom rests on the face frame and the front is flush with the face frame's front.
Trace the locations of two mounting holes onto the frame. Avoid holes too close to the top or bottom edges for easier drilling.
Ponovite za drugu stranu.
Drill the marked holes into the face frame using a 3/32 drill bit.

Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinge installed in a cabinet

Image: A Rev-A-Shelf Soft-Close Pivot Hinge installed on the inside of a cabinet, with a tip-out tray partially open.

4. Attach Hinges to Face Frame

Attach the hinges to the face frame using the provided screws.

5. Mark and Drill Holes on Drawer Front Panel

Place the drawer front panel against the face frame in its desired location, using your previously traced perimeter as a guide.
From the inside of the cabinet, mark the mounting hole locations from the hinges onto the back of the drawer front panel.
Remove the panel and carefully drill the mounting holes with a 3/32 bit. Caution: Do not drill all the way through the panel. A drill bit stop collar is recommended.

Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinge installed in a cabinet with tip-out tray

Image: A Rev-A-Shelf Soft-Close Pivot Hinge installed on the inside of a cabinet, with a tip-out tray open, showing the hinge mechanism.

6. Install Drawer Front Panel

Attach the drawer front panel to the installed hinges. This can be done from inside the cabinet with the hinges "closed" or from outside with them "open."
Do not fully tighten screws until all four are in place and the panel is aligned.

Close-up of Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinge mechanism

Slika: Krupni plan view of the Rev-A-Shelf Soft-Close Pivot Hinge mechanism, demonstrating its movement.

7. Test and Adjust

Test the function of the tip-out tray.
If needed, slightly loosen the screws and adjust the panel to ensure it closes flush and evenly.

Video: This video demonstrates the installation and operation of the soft-close pivot hinges in a tip-out tray application.

Operacija

The Rev-A-Shelf LD-0220-50SC hinges feature a 50-degree opening and a soft-close dampener mechanism. This allows the tip-out tray to open smoothly and close quietly, preventing slamming.

To open: Gently pull the top edge of the tip-out tray forward. The hinges will pivot, allowing access to the interior.
To close: Gently push the tip-out tray back into its closed position. The soft-close mechanism will engage, ensuring a quiet and controlled closure.

Video: This video illustrates the smooth operation of tip-out tray hinges, showcasing the soft-close feature.

Video: A short demonstration of a tilt-out tray hinge in operation, highlighting its functionality.

Održavanje

These hinges are designed for durability and require minimal maintenance.

čišćenje: Povremeno obrišite šarke mekom krpomamp cloth to remove dust and debris. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
podmazivanje: The hinges are pre-lubricated. If you notice any stiffness over time, a small amount of silicone-based lubricant can be applied to the pivot points.
inspekcija: Regularly check all screws to ensure they are tight. Re-tighten if necessary.

Rješavanje problema

Tray Not Closing Softly

Provjerite ima li prepreka: Ensure nothing is blocking the hinge mechanism or the path of the tray.
Provjerite instalaciju: Re-check that the hinges are installed correctly and securely, and that the screws are not overtightened, which could impede movement.
Podesite poravnanje: Slight adjustments to the panel's alignment might be needed. Loosen mounting screws slightly, adjust the panel, and re-tighten.

Tray Not Opening Smoothly

Provjerite ima li krhotina: Clear any debris that might be caught in the hinge mechanism.
podmazivanje: Apply a small amount of silicone-based lubricant to the pivot points if the movement feels stiff.

Garancija

Rev-A-Shelf LD-0220-50SC Soft-Close Pivot Hinges come with a Ograničena doživotna garancija. This warranty covers defects in material and workmanship under normal use. For specific details regarding warranty claims, please refer to the official Rev-A-Shelf websajtu ili kontaktirajte korisničku podršku.

Podrška

For further assistance, technical support, or to inquire about replacement parts, please visit the official Rev-A-Shelf webstranice ili kontaktirajte njihov odjel za korisničku podršku.

Webstranica: www.rev-a-shelf.com

Služba za korisnike: Pogledajte na webweb mjesto za kontakt detalje.

	Upute za instalaciju Rev-A-Shelf polica s mekim zatvaranjem i izvlačenjem Detaljan vodič za ugradnju Rev-A-Shelf polica s mekim zatvaranjem i izvlačenjem u donje ormariće za sudoper. Uključuje potreban alat, popis dijelova i detaljna uputstva za pripremu panela, montažu šarki i pričvršćivanje polica.
	Upute za ugradnju Rev-A-Shelf nadstolnjaka/punila za donji ormarić Korak-po-korak vodič za ugradnju Rev-A-Shelf punila za umivaonik/podni ormarić, uključujući potreban alat, vrijeme montaže i savjete za održavanje.
	Rev-A-Polica HampUpute za ugradnju zaklopke Sveobuhvatni vodič za instalaciju za Rev-A-Shelf HampPreklopni držač, s popisom dijelova, potrebnim alatima i detaljnim uputama za sastavljanje s detaljnim dijagramima opisanim u tekstu.
	Vodič za ugradnju šablona za šarke Rev-A-Shelf Ovaj dokument pruža šablon za šarke od Rev-A-Shelf za potrebe instalacije. Uključuje upute i dijagrame za ugradnju šarki.
	Vodič za instalaciju police za pribor za jelo Rev-A-Shelf Sveobuhvatne upute za instalaciju Rev-A-Shelf poslužavnika za pribor za jelo (Model I-CT-0825), s detaljnim opisom mjerenja, obrezivanja i održavanja. Poboljšajte organizaciju svojih kuhinjskih ladica pomoću ovog vodiča.
	Upute za instalaciju kompleta za montažu vrata police Rev-A Sveobuhvatan vodič za ugradnju kompleta za montažu vrata police Rev-A-Shelf, s detaljnim opisom dijelova, alata i korak-po-korak uputama za sastavljanje vrata ormarića.