RAB VANLED20 20W LED Canopy Light Fixture User Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB VANLED20 20W LED Canopy Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for commercial lighting applications, offering high efficiency and durability.

Image 1.1: The RAB VANLED20 20W LED Canopy Light Fixture. This image shows the compact, low-profile design of the white LED canopy light, suitable for various commercial installations.

2. Sigurnosne informacije

UPOZORENJE: Opasnost od strujnog udara. Isključite napajanje na osiguraču ili prekidaču prije instalacije ili servisiranja.

• Instalaciju mora izvršiti kvalificirani električar u skladu sa svim nacionalnim i lokalnim električnim propisima.
• Osigurajte dovod voltage is correct (120V-277V AC).
• Do not handle live components.
• Nosite odgovarajuću ličnu zaštitnu opremu (LZO) tokom instalacije.
• Ovaj uređaj je pogodan za vlažne prostorije.
• Ne mijenjajte uređaj. Bilo kakve modifikacije mogu poništiti garanciju i stvoriti sigurnosne rizike.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• RAB VANLED20 20W LED Canopy Light Fixture (1)
• Mounting Hardware (Screws, Gaskets, etc.)
• Vodič za instalaciju (ovaj dokument)

4. Postavljanje i instalacija

The VANLED20 is designed for ceiling mount installation to a recessed junction box or directly to the ceiling surface. It features side conduit entry points for flexible wiring.

1. Pripremite mjesto za instalaciju:
   • Isključite struju na prekidaču.
   • Ensure the mounting surface is structurally sound to support the fixture's weight (approximately 10.76 lbs).
2. Opcije montaže:
   • Recessed Junction Box: Use the provided knockout template to align and secure the fixture to the junction box.
   • Direct Ceiling Surface: Utilize the side conduit entry points for wiring. Secure the fixture directly to the ceiling using appropriate mounting hardware (not always included, check package contents).
3. Ožičenje:
   • Connect the fixture's wires to the building's electrical supply wires according to local electrical codes.
   • Osigurajte pravilno uzemljenje.
   • The fixture supports 120V-277V AC input.
   • Seal all conduit entries and the rear wire plug with weatherproof sealant to maintain the IP66 rating.
4. Osigurajte objektiv:
   • Ensure the vandal-resistant polycarbonate textured opaque drop lens is securely fastened to the die-cast aluminum housing.
5. Vrati snagu:
   • Nakon što je instalacija završena i svi priključci su sigurni, vratite napajanje na prekidaču.

5. Uputstvo za upotrebu

The RAB VANLED20 is an automatic LED light fixture. Once properly installed and powered, it will illuminate. It does not feature manual on/off switches on the unit itself. Control is typically managed via the building's electrical circuit or an external remote control system, if integrated.

• Uključeno: Ensure the circuit breaker supplying power to the fixture is in the "ON" position.
• Daljinski upravljač (opciono): If your installation includes a compatible remote control system, refer to the instructions provided with that system for operation. The fixture itself supports remote control functionality.
• Izlaz svjetlosti: The 20W LED provides cool 5000K illumination.

6. Održavanje

The RAB VANLED20 LED Canopy Light Fixture is designed for minimal maintenance, offering a long operational life of up to 100,000 hours.

• čišćenje: Periodically clean the exterior of the fixture and lens with a soft, damp krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače, jer mogu oštetiti završnu obradu ili sočivo. Prije čišćenja provjerite da je uređaj isključen iz struje.
• inspekcija: Annually inspect the fixture for any signs of damage, loose connections, or wear. Pay attention to the integrity of the housing and lens.
• LED: The integrated LED array is not user-serviceable. If the LEDs fail, the entire fixture typically requires replacement.

7. Otkrivanje problema

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support or a qualified electrician.

8. Specifikacije

• Model: VANLED20W
• Wattage: 20W
• Izvor svjetlosti: LED
• Temperatura boje: 5000K (hladno bijelo)
• Ulazni voltage: 120V-277V AC
• Životni vijek: 100,000 sata
• Materijal: Kućište od lijevanog aluminija, polikarbonatna leća
• Ocjena zaštite od ulaska (IP): IP66 (otporan na prašinu i zaštićen od snažnih mlazova vode)
• UL listing: Pogodno za vlažne lokacije
• Montaža: Ceiling mount (recessed junction or direct surface)
• Težina: Približno 10.76 lbs (4.88 kg)
• Metoda kontrole: Remote (via external system) / Push Button (via external system)
• UPC: 019813266299

9. Informacije o garanciji

RAB Lighting products are backed by a comprehensive warranty. For specific warranty terms and conditions applicable to the VANLED20W fixture, please refer to the official RAB Lighting webweb-mjesto ili kontaktirajte njihovu korisničku podršku. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.

Note: The provided product data mentions optional protection plans (e.g., 4-Year Protection Plan). These are typically third-party plans and separate from the manufacturer's standard warranty.

10. Korisnička podrška

For technical assistance, replacement parts, or further information regarding your RAB VANLED20 20W LED Canopy Light Fixture, please contact RAB Lighting directly:

• Webstranica: www.rablighting.com
• Telefon: Refer to the RAB Lighting webstranica za trenutne kontaktne brojeve.
• Email: Refer to the RAB Lighting website for current contact email addresses.

When contacting support, please have your model number (VANLED20W) and purchase date available.