CHACON EcoWatt 650 Uputstvo za upotrebu brojila energije

Uvod

This manual provides comprehensive instructions for the safe and efficient use of your CHACON EcoWatt 650 Energy Meter. This device is designed to help you monitor and understand your electricity consumption, enabling better energy management and potential energy savings.

Sigurnosne informacije

• Read all instructions thoroughly before operating the device.
• Do not disassemble, modify, or attempt to repair the device. Refer servicing to qualified personnel.
• Provjerite je li uređaj priključen na pravilno uzemljenu električnu utičnicu.
• Ne izlažite uređaj vodi, vlazi ili ekstremnim temperaturama.
• Držite uređaj van domašaja djece.
• The maximum load for this device is 3.5 kW (3500 Watts) and 6 Amps. Do not exceed these limits to prevent damage or safety hazards.

Sadržaj paketa

• CHACON EcoWatt 650 Energy Meter (Main Unit with Plug)
• Remote Display Unit with 1.20m Cable
• Korisnički priručnik (ovaj dokument)

Product Overview

The CHACON EcoWatt 650 consists of two main parts: a main unit that plugs into a wall socket and provides an outlet for your appliance, and a remote display unit connected by a 1.20-meter cable.

Slika 1: CHACON EcoWatt 650 Energy Meter, illustrating the main plug-in unit on the left and the remote display unit on the right, connected by a white cable.

Slika 2: Close-up view of the remote display unit, highlighting the LCD screen and control buttons (SET, TOTAL/V, UP/DOWN, MODE, RESET) at the bottom.

Ključne komponente:

• Glavna jedinica: This component plugs directly into a standard wall socket and features an integrated outlet for connecting the appliance you wish to monitor.
• Remote Display Unit: Equipped with an LCD screen and push-button controls, this unit displays various data points. It is connected to the main unit via a 1.20-meter cable, allowing flexible placement.
• Kontrolna dugmad: The display unit includes buttons labeled SET, TOTAL/V, UP/DOWN (indicated by triangle symbols), MODE, and RESET for navigation and configuration.

Setup

1. Raspakirajte: Carefully remove the CHACON EcoWatt 650 Energy Meter and its components from the packaging.
2. Povežite se na napajanje: Plug the main unit of the EcoWatt 650 into a standard, grounded wall outlet.
3. Appliance Connection: Plug the electrical appliance you intend to monitor into the outlet provided on the main unit of the EcoWatt 650.
4. Početni prikaz: The remote display unit should power on automatically, showing initial readings or a default screen.
5. Montaža na zid (opciono): The remote display unit can be wall-mounted for convenience. Use appropriate fasteners (not included) for secure installation.

Operacija

Basic Monitoring

Once properly connected, the EcoWatt 650 will immediately begin monitoring the power consumption of the connected appliance. The display will show various data points, which can be cycled through manually.

Setting Time and Tariff

1. Pritisnite SET dugme za ulazak u režim podešavanja.
2. Koristite GORE/DOLJE buttons (triangle symbols) to adjust values such as time, day, and tariff rates.
3. Pritisnite SET again to confirm your selection and proceed to the next setting option.
4. The device supports an adjustable double rate feature, allowing for cost calculations based on different electricity tariffs (e.g., peak and off-peak hours). Consult your electricity provider for specific tariff details.

Navigating Display Modes

Pritisnite MODE button repeatedly to cycle through the available display screens and view different measurement parameters:

• Snaga (vati): Displays the instantaneous power consumption of the connected appliance.
• Potrošnja (kWh): Shows the total accumulated energy consumption over time.
• Voltage (Volti): Indicates the current line voltage from the electrical outlet.
• Ampprije (Amps): Displays the current draw of the connected appliance.
• Cijena: Provides a calculated cost based on the accumulated consumption and the configured tariff rates.

Resetiranje podataka

To clear all accumulated data, including total consumption and calculated cost, press the RESET button. This action is useful when you wish to start a new monitoring period or clear erroneous readings.

Održavanje

• čišćenje: Obrišite uređaj mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje, rastvarače ili uranjati uređaj u vodu.
• Skladištenje: Kada se uređaj ne koristi duži period, čuvajte ga na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• inspekcija: Periodically inspect the power cable and plug for any signs of damage, fraying, or loose connections. Discontinue use if damage is observed.

Rješavanje problema

Display is blank or not showing readings.

Ensure the main unit is securely plugged into a live wall outlet. Verify that the appliance is correctly connected to the meter and is drawing power. Check if the wall outlet itself is functional.

Readings appear incorrect or inconsistent.

Confirm that the connected appliance is operating normally. If cost calculations are inaccurate, review and adjust the tariff settings. Try performing a full reset of the device.

Uređaj ne reaguje na pritiske dugmadi.

Pritisnite RESET button. If the issue persists, unplug the entire unit from the wall outlet for a few minutes, then plug it back in to perform a hard reset.

Specifikacije

Garancija i podrška

For detailed warranty information, terms and conditions, and technical support, please refer to the documentation provided with your original purchase. You may also visit the official CHACON website for further assistance. Please retain your proof of purchase for any warranty claims.