Intermatic ST01 24-Hour In-Wall Timer Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Slika 1: Prednja strana view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.

2. Sigurnosne informacije

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.

• Ne instalirajte mokrim rukama.
• Do not use in locations where it may be exposed to water or extreme humidity.
• Osigurajte da su svi spojevi ožičenja sigurni i da su u skladu s lokalnim električnim propisima.
• This device is rated for 120-277V, 15A, 1800W. Do not exceed these ratings.
• Samo za unutrašnju upotrebu.

3. Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• Intermatic ST01 24-Hour In-Wall Timer (1 unit)
• Vijci za montažu (2 komada)
• Žičane matice (3 komada)
• Uputstvo za upotrebu (ovaj dokument)

4. Instalacija

Slijedite ove korake za sigurnu i pravilnu instalaciju:

1. Isključite napajanje: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltage tester.
2. Uklonite postojeći prekidač: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
3. Wire the Timer: The ST01 timer typically has three wires:
   • Black (Line): Connect to the incoming hot wire from the circuit breaker.
   • Crvena (Punjenje): Connect to the wire going to the light fixture or appliance.
   • zelena (zemlja): Connect to the bare copper or green ground wire in the wall box.
   Use wire nuts to secure all connections. Ensure connections are tight and no bare wire is exposed.
4. Montirajte tajmer: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
5. Instalirajte zidnu ploču: Attach a standard wall plate (not included) over the timer.
6. Vrati snagu: Ponovo uključite napajanje na prekidaču ili kutiji s osiguračima.

Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.

5. Početno podešavanje i programiranje

Prilikom prvog uključivanja ili nakon nestanka strujetage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.

1. Postavite trenutno vrijeme:
   • Pritisnite CLOCK dugme.
   • Koristite HOUR i MINUTE buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
   • Pritisnite CLOCK ponovo za spremanje i izlaz.
2. Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
   • Pritisnite PROG dugme. Na displeju će se prikazati "1 UKLJUČENO".
   • Koristi HOUR i MINUTE buttons to set the desired ON time for program 1.
   • Pritisnite PROG ponovo. Na ekranu će se prikazati "1 ISKLJUČENO".
   • Koristi HOUR i MINUTE buttons to set the desired OFF time for program 1.
   • Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
   • Pritisnite CLOCK to save all programs and return to normal operation.

Refer to the timer's LCD display for visual cues during programming.

6. Operating the Timer

Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:

• Ručno uključivanje/isključivanje: Pritisnite MANUAL button to cycle through ON, OFF, and AUTO modes.
  • ON: The connected device will remain ON, overriding all programs.
  • ISKLJUČENO: The connected device will remain OFF, overriding all programs.
  • AUTOMATSKI: The timer will operate according to the programmed schedules. This is the default operating mode.
• Random Mode (if available): Some models may include a random mode for security. Consult the specific model's features if this is desired.

7. Održavanje

The Intermatic ST01 timer requires minimal maintenance:

• čišćenje: Wipe the timer's surface with a soft, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• baterija: The internal CR2 lithium battery maintains time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display becomes dim or settings are lost frequently, professional servicing may be required.
• inspekcija: Periodically inspect the timer and wall plate for any signs of damage or loose connections.

8. Otkrivanje problema

9. Specifikacije

• Model: ST01
• Vrsta: 24-Hour In-Wall Digital Timer
• Voltage: 120 - 277 V
• Amperage: 15 A
• Snaga: 1800 W
• Poljaci: 1
• Operacija: ON/OFF, Digital, LCD Display
• Postavka vremena: 12-satni format
• baterija: CR2 Lithium (for memory backup)
• Radna temperatura: 32°F do 104°F (0°C do 40°C)
• Montaža: Podžbukna montaža
• Dimenzije (ukupno): 2.75" H x 1.75" W x 1.46" D (70mm H x 44mm W x 37mm D)
• Boja: Bijelo
• Materijal: Metal
• Certifikati: CSA certificirano
• Kompatibilnost: Incandescent, Fluorescent lighting
• Težina artikla: 8 unci (približno 227 grama)

10. Garancija i podrška

For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

Intermatic korisnička služba:

• Webstranica: www.intermatic.com
• Refer to the official Intermatic webstranicu za najnovije kontakt informacije i detalje o garanciji.