Uvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your StarTech.com 10/100Mbps Ethernet to USB 2.0 Network Print Server (PM1115U2). This device enables you to share a USB printer with multiple users across your local area network (LAN), eliminating the need for individual printers at each workstation.
The print server supports web-based management for easy setup and monitoring, allowing flexible placement of your printer. It is compatible with most standard USB printers and works with both Mac and Windows operating systems, including Windows 10. It also supports Line Printer Remote (LPR) protocol and Bonjour Print Services for broad network printing capabilities.
Sadržaj paketa
Prije nego što nastavite s instalacijom, provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:
- 1x StarTech.com 10/100Mbps Ethernet to USB 2.0 Network Print Server (PM1115U2)
- 1x Universal Power Adapter (NA/UK/EU/AU)
- 1x RJ45 Network Cable
- 1x brzi vodič
Postavljanje i instalacija
Follow these steps to set up your network print server:
- Connect the Print Server to Power: Connect the universal power adapter to the DC 5V port on the print server and plug it into a power outlet. The Power LED indicator on the print server should illuminate.
- Povežite se na mrežu: Connect one end of the included RJ45 network cable to the Ethernet port on the print server and the other end to an available Ethernet port on your network router or switch. The Link and Act LEDs on the print server's Ethernet port should indicate network activity.
- Povežite se sa štampačem: Connect your USB printer to the USB Type-A port on the print server using a standard USB printer cable (not included).
- Početna konfiguracija: The print server can be configured via a web browser. Refer to the included Quick Start Guide for detailed instructions on accessing the web-based management interface and configuring network settings, including IP address assignment (DHCP supported).
Operacija
Once the print server is set up and configured on your network, users can print to the connected USB printer from any computer on the same LAN. The print server supports various network protocols for broad compatibility.
Supported Operating Systems and Protocols:
- Operativni sistemi: Compatible with Mac and Windows operating systems, including Windows 10.
- Mrežni protokoli: Supports Line Printer Remote (LPR) protocol and Bonjour Print Services.
- Mrežna kompatibilnost: Works with any network that can communicate on 10Base-T or 100Base-T Ethernet.
Note: Printing from Android, iPad, and iPhone devices is not supported by this print server.
Održavanje
The StarTech.com PM1115U2 Network Print Server is designed for reliable operation with minimal maintenance. To ensure optimal performance and longevity:
- Održavajte čistoću: Periodically wipe the exterior of the device with a soft, dry cloth to remove dust. Do not use liquid cleaners or aerosols.
- ventilacija: Osigurajte da je uređaj postavljen u dobro prozračenom prostoru kako biste spriječili pregrijavanje. Ne blokirajte ventilacijske otvore.
- Ažuriranja firmvera: Check the StarTech.com website periodically for any available firmware updates for your model. Firmware updates can improve performance, add features, or resolve issues.
- Kablovske veze: Ensure all cables (power, Ethernet, USB) are securely connected to prevent intermittent connectivity issues.
Rješavanje problema
If you encounter issues with your StarTech.com Network Print Server, consider the following troubleshooting steps:
- Nema napajanja:
- Verify the power adapter is securely connected to the print server and a working power outlet.
- Check if the Power LED on the print server is illuminated.
- Nema mrežne veze:
- Ensure the RJ45 network cable is securely connected to both the print server and your network router/switch.
- Check the Link and Act LEDs on the print server's Ethernet port. If they are off, there might be a cable issue or a problem with the network port on your router/switch.
- Verify the print server has a valid IP address on your network. This can be checked via the web-bazirano upravljanje interfejsom.
- Štampač ne reaguje:
- Ensure the USB printer cable is securely connected between the print server and the printer.
- Verify the printer is powered on and in a ready state.
- Confirm that the correct printer drivers are installed on the client computers attempting to print.
- Restart the print server and the printer.
- Ne mogu pristupiti Web Interfejs:
- Ensure your computer is on the same network segment as the print server.
- Verify the IP address of the print server. If it's set to DHCP, check your router's DHCP client list. If it's static, ensure you are using the correct IP address.
- Privremeno onemogućite sve softverske programe za zaštitni zid (firewall) na računaru koji bi mogli blokirati pristup.
For further assistance, refer to the online FAQs and IT Pro Community available on the StarTech.com website. You can also consult the official Uputstvo za upotrebu (PDF) or Uputstvo za instalaciju (PDF) provided by StarTech.com.
Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | PM1115U2 |
| Brand | StarTech.com |
| Dimenzije proizvoda | 2.1 x 2.1 x 0.9 inča (5.33 x 5.33 x 2.29 cm) |
| Težina artikla | 2.18 unci (0.06 kg) |
| Hardversko sučelje | Ethernet, USB, USB 2.0 |
| Data Link Protocol | IEEE 802.3 |
| Brzina prijenosa podataka | 100 megabita u sekundi |
| Boja | Crna |
| Kompatibilni uređaji | Štampač |
| UPC | 065030855174 |
Garancija i podrška
For information regarding product warranty, technical support, and additional resources, please visit the official StarTech.com webweb-mjesto ili pogledajte dokumentaciju koja dolazi s vašim proizvodom.
StarTech.com offers a range of support options, including online FAQs, a knowledge base, and direct technical assistance to help you with any queries or issues you may encounter.
Zvanični korisnički priručnik (PDF): Preuzmite ovdje
Zvanični priručnik za instalaciju (PDF): Preuzmite ovdje
