1. Uvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Veracity VHW-HW01 Single Ethernet Over Coax Device. The VHW-HW01 is designed to extend Ethernet network connections over existing coaxial cable infrastructure, providing a reliable and cost-effective solution for long-distance data transmission without the need for new cabling.
The device facilitates high-speed Ethernet communication, making it ideal for applications such as IP camera installations, network extensions in older buildings, or any scenario where running new Ethernet cable is impractical.
Slika 1: Front view of the Veracity VHW-HW01 device, showing the Ethernet port, power input, and coaxial connector.
2. Ključne karakteristike
- Ethernet Over Coax: Extends 100Mbps Ethernet connections over standard coaxial cable.
- Visoki propusni opseg: Supports up to 100 Megabits Per Second (Mbps) data transfer rate.
- Jednostavna instalacija: Plug-and-play operation with minimal configuration required.
- Kompaktan dizajn: Small form factor for easy deployment in various environments.
- Pouzdano povezivanje: Provides stable and secure data transmission over long distances.
3. Sadržaj paketa
Please verify that all items are present and in good condition upon opening the package. If any items are missing or damaged, please contact your supplier.
- Veracity VHW-HW01 Single Ethernet Over Coax Device (1 unit)
- Power Adapter (may be sold separately or included depending on region/kit)
- Kratki vodič / Korisnički priručnik (ovaj dokument)
4. Postavljanje i instalacija
The VHW-HW01 operates in pairs, with one unit at each end of the coaxial cable run. Ensure you have two units for a complete link (this product listing is for a single unit).
- Identifikujte tačke povezivanja: Determine the location for each VHW-HW01 unit. One unit will connect to your network device (e.g., router, switch, NVR) and the other to the remote Ethernet device (e.g., IP camera, PC).
- Povežite koaksijalni kabl: Connect a standard coaxial cable (e.g., RG59, RG6, RG11) to the BNC connector on the VHW-HW01 unit. Ensure the connection is secure.
- Spojite Ethernet kabel: Connect a standard RJ45 Ethernet cable from your network device to the Ethernet port on the VHW-HW01 unit.
- Primijeni snagu: Connect the appropriate 12V DC or 24V AC power adapter (if not already integrated) to the power input terminals on the VHW-HW01. Observe the polarity for DC power.
- Potvrdi status veze: Once power is applied to both units and the coaxial cable is connected, observe the LED indicators on the device. A solid link light indicates a successful coaxial connection, and Ethernet activity lights will show data flow.
Slika 2: Side view of the Veracity VHW-HW01, highlighting the power input terminals and Ethernet port.
5. Operacija
The Veracity VHW-HW01 is a transparent Ethernet extender. Once properly installed and powered, it operates automatically without requiring any user configuration. Data packets are seamlessly transmitted over the coaxial cable, appearing as a direct Ethernet connection to connected devices.
- Uključeno: Ensure both VHW-HW01 units are powered on.
- Link Establishment: The devices will automatically establish a high-speed Ethernet link over the coaxial cable. This is indicated by the link status LEDs.
- Prijenos podataka: Network traffic from the connected Ethernet devices will flow through the VHW-HW01 units over the coaxial cable.
6. Održavanje
The Veracity VHW-HW01 is designed for maintenance-free operation. However, following these guidelines can help ensure its longevity and reliable performance:
- čišćenje: Uređaj održavajte čistim i bez prašine. Za čišćenje koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili aerosole.
- Okruženje: Operate the device within its specified environmental conditions (temperature, humidity). Avoid exposing it to extreme temperatures, direct sunlight, or excessive moisture.
- Kablovske veze: Periodically check all cable connections (coaxial, Ethernet, power) to ensure they are secure and free from damage.
- ventilacija: Ensure adequate airflow around the device to prevent overheating, although passive cooling is typically sufficient for this low-power device.
7. Otkrivanje problema
If you encounter issues with your VHW-HW01 device, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema indikatorske lampice za napajanje. | No power supply, incorrect power adapter, or faulty power connection. |
|
| Coaxial link light is off or blinking. | No coaxial connection, faulty coaxial cable, or only one unit powered. |
|
| Ethernet activity light is off. | No Ethernet connection, faulty Ethernet cable, or connected device is off. |
|
| Spora brzina mreže. | Poor coaxial cable quality, excessive cable length, or network congestion. |
|
8. Specifikacije
| Atribut | Vrijednost |
|---|---|
| Brand | Veracity |
| Broj modela | VHW-HW |
| Hardversko sučelje | Ethernet, Coaxial (BNC) |
| Data Link Protocol | Ethernet |
| Brzina prijenosa podataka | 100 megabita u sekundi |
| Težina artikla | 3.52 unci (približno 100 grama) |
| Dimenzije paketa | 4 x 2.1 x 0.9 inča (približno 10.16 x 5.33 x 2.29 cm) |
| Proizvođač | Veracity |
| Prvi raspoloživi datum | 12. februara 2012 |
9. Garancija i podrška
Veracity products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official Veracity website.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding product returns and repairs, please contact Veracity customer support through their official channels. Ensure you have your product model number (VHW-HW01) and purchase details ready when contacting support.
Online resursi: For the latest documentation, FAQs, and software updates, please visit the official Veracity website.
