1. Uvod
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.
Slika 1: Prednja strana view of the Legrand LEG97605 Dimmer Switch.
2. Važne informacije o sigurnosti
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.
- Instalaciju treba izvršiti kvalificirani električar ili u skladu s lokalnim električnim propisima.
- Nemojte prekoračiti maksimalnu snagutage ocjena od 300W.
- Osigurajte da su svi spojevi žica sigurni i pravilno izolirani.
- Ovaj uređaj je dizajniran samo za upotrebu u zatvorenom prostoru.
- Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.
3. Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
- Mounting Screws (Quantity may vary)
- Uputstvo za upotrebu (ovaj dokument)
Figure 2: Legrand LEG97605 Dimmer Switch as packaged.
4. Upute za instalaciju
Follow these steps carefully to install your dimmer switch:
- Isključite napajanje: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltage tester prije nego što nastavite.
- Pripremite lokaciju za montažu: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
- Ožičenje:
- Identify the live (line) wire and the load wire (to the light fixture).
- Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
- Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
- Ensure all connections are tight using the screw terminals.
- Montaža: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
- Vrati snagu: Nakon što je instalacija završena i svi priključci su sigurni, ponovo uključite napajanje na prekidaču.
Slika 3: Vrh view of the dimmer switch, illustrating potential wiring points.
5. Operating Your Dimmer Switch
The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.
- To Turn ON/OFF: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
- To Dim/Brighten: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
Slika 4: Pod uglom view highlighting the rotary control knob.
6. Održavanje
Your Legrand dimmer switch requires minimal maintenance.
- čišćenje: To clean the surface of the dimmer, wipe with a soft, damp krpom. Ne koristite abrazivna sredstva za čišćenje, rastvarače ili jake hemikalije, jer mogu oštetiti završnu obradu.
- inspekcija: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
7. Otkrivanje problema
If you experience issues with your dimmer switch, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. | No power to the switch; incorrect wiring. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Light does not dim or dims poorly. | Incompatible bulb type; minimum load not met. | Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any). |
| Svjetlo treperi ili zuji. | Loose wiring connection; incompatible bulb type; electrical interference. | Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists. |
| Dimmer feels hot to the touch. | Overload or improper wiring. | Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician. |
If the problem persists after attempting these solutions, contact Legrand customer support or a qualified electrician.
8. Tehničke specifikacije
| Feature | Detalj |
|---|---|
| Brand | Legrand |
| Broj modela | LEG97605 |
| Način rada | UKLJUČENO ISKLJUČENO |
| Current Rating | 10 Amps |
| Wattage | 300 Watts |
| Vrsta kontakta | Normalno otvoren |
| Tip konektora | Vijci |
| Terminal | Screw |
| Tip kruga | 1-way |
| Tip aktuatora | Rotary |
| Tip kontrolera | Pritisnite dugme |
| Kontakt materijal | Bakar |
| Međunarodna ocjena zaštite | IP54 |
| Vrsta montaže | Surface Mount |
| Boja | Bijelo |
| Težina artikla | 2.46 unce |
| Datum prve dostupnosti | 25. septembra 2015 |
9. Garancija i korisnička podrška
For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand webnajnovije kontakt podatke potražite na lokaciji ili pakovanju proizvoda.
Legrand Official Webstranica: www.legrand.us
