Uputstvo za upotrebu seta ručki Weiser Augusta

Uvod

The Weiser Augusta Handle Set is a stylishly designed exterior door lock system from the Welcome Home series, engineered to provide maximum-security protection for your home. This handleset features a satin nickel finish, offering a modern aesthetic. It can be securely locked or unlocked using a key from the outside, or with a key or turnpiece from the inside. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your handle set.

Figure 1: Weiser Augusta Handle Set components, including the exterior handleset with deadbolt and the interior lever, all in a satin nickel finish.

Postavljanje i instalacija

This section outlines the steps required to properly install your Weiser Augusta Handle Set. Ensure you have all necessary tools before beginning the installation process.

Potreban alat:

• Phillips odvijač
• Merna traka
• Olovka
• Drill (if new door preparation is needed)

Koraci instalacije:

1. Pripremite vrata: Ensure your door has a 2-1/8 inch cross bore for the handleset. If installing on a new door, follow standard door preparation guidelines for bore holes and backset.
2. Install the Latch and Deadbolt: Insert the latch and deadbolt mechanisms into the door edge. Secure them with the provided screws. Ensure the latch bolt is facing the correct direction for your door swing.
3. Assemble Exterior Handleset: Place the exterior handleset through the bore holes, aligning it with the latch and deadbolt.
4. Assemble Interior Components: Attach the interior mounting plate and lever assembly. Secure all components with the long through-bolts and screws provided.
5. Probni rad: Before closing the door, test the deadbolt and latch operation with the key from the outside and the turnpiece/key from the inside. Ensure smooth engagement and retraction.
6. Install Strike Plates: Install the strike plates on the door frame, aligning them with the latch and deadbolt. Ensure a secure and flush fit.

Uputstvo za upotrebu

The Weiser Augusta Handle Set is designed for ease of use and enhanced security.

Zaključavanje i otključavanje:

• Iz eksterijera: Insert the key into the deadbolt cylinder and turn to lock or unlock. The handle below the deadbolt is a pull handle and does not require a key for entry once the deadbolt is unlocked.
• Iz unutrašnjosti: Use the turnpiece on the deadbolt to lock or unlock. The interior lever operates the latch for entry/exit.

Tehnologija ponovnog kodiranja SmartKey:

This handle set features SmartKey re-key technology, allowing you to re-key the lock yourself in seconds. This is useful if you want to match your lock to an existing key or if you lose a key and want to change the lock's keying.

1. Umetni trenutni ključ: Insert your currently working key fully into the SmartKey cylinder.
2. Ključ u ruke: Rotate the key 90 degrees clockwise.
3. Umetnite alat SmartKey: While the key is turned, insert the SmartKey tool firmly and fully into the small hole on the cylinder face.
4. Ukloni trenutni ključ: Remove the current key while keeping the SmartKey tool inserted.
5. Umetni novi ključ: Insert your new key fully into the cylinder.
6. Uklonite alat SmartKey: Uklonite alat SmartKey.
7. Testiraj novi ključ: Rotate the new key 180 degrees counter-clockwise to the original position, then remove it. Test the new key to ensure it operates the lock smoothly.

For a visual guide, please refer to the official Weiser SmartKey re-keying video tutorials available on the Weiser website or authorized channels. (Note: No video provided in JSON, so this is a general suggestion).

Održavanje

Proper maintenance will ensure the longevity and smooth operation of your Weiser Augusta Handle Set.

• čišćenje: Očistite vanjske površine mekom,amp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the satin nickel finish.
• podmazivanje: Periodically apply a silicone-based lubricant (do not use oil-based lubricants) to the internal mechanisms of the lock and deadbolt to ensure smooth operation. Apply sparingly into the keyway and latch bolt.
• Vijci za pritezanje: Over time, screws may loosen. Periodically check and tighten all mounting screws to ensure the handleset remains securely fastened to the door. Do not overtighten.

Rješavanje problema

This section addresses common issues you might encounter with your Weiser Augusta Handle Set.

If you continue to experience issues after attempting these solutions, please contact Weiser customer support.

Specifikacije

Garancija i podrška

Weiser stands behind the quality of its products. Your Augusta Handle Set comes with a comprehensive warranty.

Informacije o garanciji:

Ovaj proizvod je pokriven a Ograničena doživotna garancija. This warranty covers defects in material and workmanship for the lifetime of the original residential user. For full details regarding warranty coverage, limitations, and claims procedures, please refer to the official Weiser websajtu ili kontaktirajte korisničku podršku.

Korisnička podrška:

For technical assistance, warranty claims, or general inquiries, please contact Weiser customer support through their official channels:

• Webstranica: Visit the official Weiser webstranica za često postavljana pitanja, registraciju proizvoda i kontakt obrasce. www.weiserlock.com
• Telefon: Pogledajte Weisera webstranica za regionalne brojeve telefona korisničke službe.

When contacting support, please have your product model number (GLA9471 A/A15 SMT VS) and purchase information readily available.