Palmer Monicon L Pasivni kontroler monitora - uputstvo za upotrebu

1. Uvod

The Palmer Monicon L is a precise analog volume control designed for professional audio environments. It serves as an intermediary device between audio sources, such as computers or audio interfaces, and self-powered monitor loudspeakers. Its passive circuitry ensures signal integrity without coloration. The unit features LED indicators and a built-in headphone amplifier, which are powered by the included DC adapter.

This manual provides detailed instructions for the setup, operation, and maintenance of your Palmer Monicon L to ensure optimal performance and longevity.

Figure 1: Palmer Monicon L Passive Monitor Controller, front angled view. This image shows the main unit with its large stereo volume knob, smaller auxiliary volume and headphone knobs, and various input/output selection buttons.

2. Važna sigurnosna uputstva

• Prije upotrebe uređaja pažljivo pročitajte ova uputstva.
• Sačuvajte ove upute za buduću upotrebu.
• Poštujte sva upozorenja na proizvodu i u ovom priručniku.
• Nemojte koristiti ovaj aparat u blizini vode.
• Čistite samo suhom krpom.
• Ne blokirajte ventilacijske otvore. Instalirajte u skladu s uputama proizvođača.
• Ne postavljajte u blizini izvora toplote kao što su radijatori, grejni registri, peći ili drugi uređaji (uključujući ampLifiers) koji proizvode toplotu.
• Koristite samo dodatke/pribor koje je naveo proizvođač.
• Sav servis prepustite kvalifikovanom servisnom osoblju. Servisiranje je potrebno kada je uređaj oštećen na bilo koji način, kao što je oštećen kabl za napajanje ili utikač, prolivena tečnost ili su predmeti upali u aparat, ako je uređaj bio izložen kiši ili vlazi, ne radi normalno , ili je odbačeno.

3. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:

• Palmer Monicon L Passive Monitor Controller
• DC Power Supply (15V, 200mA)

Figure 2: The included DC 15V 200mA power supply. This adapter provides power for the LED indicators and the headphone amplifier.

4. Proizvod je gotovview

4.1 Kontrole na prednjoj ploči

Slika 3: Od vrha prema dolje view of the Palmer Monicon L front panel, highlighting the main controls and indicators.

• STEREO VOLUME Knob: Large central knob for precise control of the main stereo output volume.
• AUX VOLUME Knob: Controls the volume level of the auxiliary input.
• HEADPHONES Knob: Adjusts the output volume for the headphone jack.
• INPUT SELECTION (STEREO/AUX) Buttons: Selects between the main stereo input (1) and the auxiliary input (2).
• OUTPUT SELECTION (1/2) Buttons: Activates or deactivates output pairs 1 and 2. Both can be active simultaneously.
• STEREO MONO Button: Sums the stereo output signal into a mono signal.
• Dugme MUTE: Silences all active outputs.
• PFL STEREO / PFL AUX Buttons: Pre-Fader Listen for the stereo and auxiliary inputs, allowing monitoring through headphones independently of the main volume.
• Priključak za slušalice: 6.35 mm (1/4") TRS jack for connecting headphones.

4.2 Priključci stražnje ploče

Slika 4: Pozadi view of the Palmer Monicon L, showing all input and output connectors.

• DC 15V 200mA Input: Power input for the included DC adapter.
• MONO SUM Output: XLR connectors for a summed mono output, typically used for a subwoofer.
• OUTPUT 1 (L/R) XLR: Balanced XLR outputs for the first pair of monitor speakers.
• OUTPUT 2 (L/R) XLR: Balanced XLR outputs for the second pair of monitor speakers.
• STEREO INPUT (L/R) Combo Sockets: Balanced combo sockets (XLR/TRS) for the main stereo input.
• AUX INPUT (L/R) RCA & 3.5mm TRS: Auxiliary input featuring RCA connectors and a 3.5 mm TRS jack.

5. Podešavanje i veze

Follow these steps to connect your Palmer Monicon L to your audio system:

5.1 Priključak za napajanje

1. Connect the included DC 15V 200mA power adapter to the "DC 15V 200mA" input on the rear panel of the Monicon L.
2. Plug the power adapter into a suitable wall outlet. The LED indicators on the front panel will illuminate.

5.2 Priključci audio ulaza

The Monicon L offers two distinct stereo input options:

1. Main Stereo Input (Input 1): Use balanced XLR or 1/4" TRS cables to connect your primary audio source (e.g., audio interface, mixer output) to the "STEREO INPUT L/R" combo sockets on the rear panel.
2. Auxiliary Input (Input 2): For secondary audio sources (e.g., computer, media player), use RCA cables to the "AUX INPUT L/R" RCA connectors or a 3.5 mm TRS cable to the "AUX INPUT" 3.5mm jack.

5.3 Priključci audio izlaza

The Monicon L provides multiple output options for your monitoring setup:

1. Monitor Speakers (Output 1 & 2): Connect your self-powered monitor speakers using balanced XLR cables to the "OUTPUT 1 L/R" and/or "OUTPUT 2 L/R" XLR connectors. You can connect up to two pairs of monitors.
2. Subwoofer (Mono Sum): If you use a subwoofer, connect it to the "MONO SUM" XLR output. This output provides a summed mono signal of the selected stereo input.
3. slušalice: Plug your headphones into the 6.35 mm (1/4") TRS "HEADPHONES" jack on the front panel.

Figure 5: A diagram illustrating typical connection scenarios for the Palmer Monicon L, showing inputs from an audio interface and a laptop, and outputs to two pairs of speakers and a subwoofer.

6. Operacija

This section details the functions of each control on your Monicon L.

6.1 Kontrola jačine zvuka

• STEREO VOLUME: Rotate this large knob clockwise to increase the volume of the selected stereo output, and counter-clockwise to decrease it. This is the primary volume control for your monitor speakers.
• AUX VOLUME: Adjusts the input level for the auxiliary input source. This allows you to balance the volume of your auxiliary device before it reaches the main stereo volume control.
• SLUŠALICE: Controls the listening volume for headphones connected to the front panel jack.

6.2 Odabir ulaza

• INPUT SELECTION (1/2): Press the "1" button to select the main stereo input (XLR/TRS combo sockets). Press the "2" button to select the auxiliary input (RCA/3.5mm TRS). Only one input can be active at a time.

6.3 Odabir izlaza

• OUTPUT SELECTION (1/2): Press the "1" button to activate the first pair of monitor outputs (OUTPUT 1 L/R). Press the "2" button to activate the second pair of monitor outputs (OUTPUT 2 L/R). You can activate both outputs simultaneously to listen through both speaker pairs.

6.4 Funkcije praćenja

• STEREO MONO: Press this button to sum the stereo signal into a mono signal. This is useful for checking phase compatibility and how your mix translates to mono playback systems.
• MUTE: Press this button to instantly silence all active outputs. Press it again to restore the audio.
• PFL STEREO / PFL AUX: These buttons enable Pre-Fader Listen for the respective inputs. When activated, the selected input signal is routed directly to the headphone output, bypassing the main STEREO VOLUME control. This allows you to monitor an input source without affecting the main speaker output.

7. Održavanje i njega

• čišćenje: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the unit. Do not use liquid cleaners, aerosols, or solvents.
• Okruženje: Keep the Monicon L away from direct sunlight, excessive heat, moisture, and dust.
• Skladištenje: Ako uređaj skladištite duži period, isključite ga iz struje i čuvajte ga na hladnom i suhom mjestu.

8. Otkrivanje problema

9. Specifikacije

Slika 6: Dimenzionalno view of the Palmer Monicon L, showing its width (9.4"), depth (3.3"), and height (2.4").

10. Garancija i podrška

For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Palmer website.

Should you encounter any issues or require technical assistance, please contact Palmer customer support through their official channels.

Palmer Webstranica: www.palmer-germany.com